giriiş
This manual provides essential information for the safe and proper assembly, use, and maintenance of your Graco Benton 4-in-1 Convertible Crib and Changer. Please read all instructions carefully before assembly and retain this manual for future reference. This product is designed to adapt to your child's growth, converting from a crib to a toddler bed, daybed, and full-size bed with headboard.
Image: The Graco Benton 4-in-1 Convertible Crib and Changer in black, showcasing its crib and attached changing table configuration.
Güvenlik Bilgileri
Çocuğunuzun güvenliği her şeyden önemlidir. Lütfen her zaman şu kurallara uyun:
- Tüm talimatları okuyunuz: Ensure you understand all assembly and usage instructions before using the product.
- Düzenli Muayene: Vidaların, cıvataların ve bağlantı elemanlarının sıkı ve sağlam olduğundan emin olmak için periyodik olarak kontrol edin. Herhangi bir parçası eksik, hasarlı veya kırık ise beşiği kullanmayın.
- Mattress Safety: Use only a mattress that is at least 27 1/4 inches (69 cm) by 51 5/8 inches (131 cm) with a thickness not exceeding 6 inches (15 cm). The mattress must fit snugly without gaps.
- Child Height Limit: Discontinue use of the crib when your child begins to climb out or reaches 35 inches (89 cm) in height.
- Changing Table Safety: Always use the safety strap provided with the changing pad. Never leave a child unattended on the changing table.
- Boğulma Tehlikesi: Keep small parts, plastic bags, and packaging materials away from children.
- Sertifikalar: This product is GREENGUARD Gold Certified, screened for over 10,000 chemicals and VOCs, and JPMA Certified, meeting or exceeding all applicable safety standards.
Image: The Graco Benton Crib and Changer with a GREENGUARD Gold Certified badge, indicating low chemical emissions.
Bileşenler Listesi
Before assembly, ensure all components are present. Refer to the detailed parts list in your product packaging for specific hardware. Key components include:
- Crib side rails (front, back, left, right)
- Crib mattress support base
- Changing table frame
- Changing pad with safety strap
- Drawer components (3 drawers)
- Shelf components (2 open shelves)
- Hardware pack (screws, bolts, barrel nuts, Allen wrench)
Image: A diagram illustrating the key features of the crib and changer, including the adjustable mattress support, attached changing table, drawers, and shelves.
Kurmak
Assembly is required. Follow the step-by-step instructions provided in the separate assembly guide included with your product. A general overview of the setup process is as follows:
- Bileşenleri Paketinden Çıkarın: Tüm parçaları ambalajından dikkatlice çıkarın ve bileşen listesine göre kontrol edin.
- Assemble Crib Frame: Verilen bağlantı elemanlarını kullanarak yan rayları başlık ve ayakucu panellerine takın.
- Yatak destek aparatını takın: Secure the mattress support base at the desired height. There are three adjustable height options.
- Assemble Changing Table: Construct the changing table frame, including the drawers and open shelves.
- Attach Changing Table: Securely attach the assembled changing table to the crib frame.
- Install Changing Pad: Place the water-resistant changing pad on the changing table and secure it with the safety strap.
For detailed visual instructions, please refer to the assembly diagrams in your product's dedicated assembly manual.
Kullanım Talimatları
Crib Use
Place your child in the crib on their back. Ensure the mattress is firm and fits snugly. Adjust the mattress support base to the appropriate height for your child's developmental stage. The highest position is for infants, and lower positions are for older babies who can sit or stand.
Changing Table Use
Always use the changing pad with the safety strap. Place your child on the changing pad and secure the safety strap around them. Keep all necessary changing supplies within reach but away from the child. Never leave your child unattended on the changing table.
Image: A close-up of the attached changing table, showing the water-resistant changing pad and the integrated safety strap.
Dönüşümler
The Graco Benton 4-in-1 Crib and Changer converts to a toddler bed, daybed, and full-size bed. Conversion kits and mattresses are sold separately.
- Yürümeye Başlayan Çocuk Yatağı: Remove the front crib rail and install the Graco Toddler Guardrail (sold separately).
- Kanepe: Remove the front crib rail. No guardrail is used for the daybed configuration.
- Tam Boy Yatak: Remove all crib rails and the changing table. Attach the headboard to a Graco Full-Size Conversion Kit (sold separately) and a standard full-size mattress.
Image: A visual representation of the four conversion stages: crib, toddler bed, daybed, and full-size bed with headboard.
Bakım
To maintain the quality and safety of your Graco Benton Crib and Changer:
- Temizlik: Yüzeyleri reklamla silinamp cloth. Avoid abrasive cleaners or strong chemicals that could damage the finish or materials.
- Depolamak: If storing the product, do so in a dry, temperature-controlled environment to prevent warping or damage.
- Donanım: Periodically check all hardware for tightness. Loose hardware can lead to instability and safety hazards.
Sorun giderme
If you encounter issues with your Graco Benton Crib and Changer, consider the following:
- Sallantılı Yapı: Ensure all bolts and screws are fully tightened. Re-check assembly steps to confirm correct part placement.
- Çekmeceler Düzgün Kaymıyor: Verify that the Euro drawer glides are correctly installed and free from obstructions. Ensure drawers are not overloaded.
- Dönüşümlerde Zorluk: Refer to the specific conversion instructions provided with the optional conversion kits. Ensure all necessary parts are acquired.
- Kayıp parçalar: If any parts are missing upon unboxing, contact customer support immediately. Do not attempt to substitute parts.
Özellikler
| Özellik | Detay |
|---|---|
| Model Numarası | 04586-64B |
| Renk | Siyah |
| Ürün Boyutları (U x G x Y) | 73.2" x 29.8" x 41.7" |
| Ürün Ağırlığı | 98 Pound |
| Malzeme | Çam ağacı, işlenmiş ahşap ve ahşap kompozitler |
| Maximum Child Height (Crib Stage) | 35 inç (89 cm) |
| Maximum Weight (Toddler/Daybed) | 50 Pound |
| Sertifikalar | GREENGUARD Altın Sertifikalı, JPMA Sertifikalı |
| UPC | 081877503177 |
Image: A diagram illustrating the overall dimensions of the Graco Benton Crib and Changer.
Resmi Ürün Videosu
Video: An official video from Storkcraft, the manufacturer of Graco products, highlighting the brand's commitment to supporting parents and providing safe, reliable baby products. This video showcases various Graco products and the design philosophy behind them.
Garanti ve Destek
The Graco Benton 4-in-1 Convertible Crib and Changer is backed by a 1 yıllık sınırlı garanti Üretim hatalarına karşı garantilidir. Garanti talepleri için lütfen satın alma belgenizi saklayın.
For customer support, missing parts, or further assistance, please contact Storkcraft Customer Service:
- Webalan: Ziyaret edin Storkcraft Brand Store İletişim bilgileri ve sıkça sorulan sorular için.
- Telefon: Refer to the contact details provided in your product packaging or on the official Storkcraft webalan.
When contacting support, please have your model number (04586-64B) and date of purchase readily available.
