1. Giriş
The Superior Electronics Simply SUPTLB001 is a universal remote control designed for ease of use and simplicity. It features a self-learning function, allowing it to acquire commands directly from your original remote controls. This remote is capable of controlling up to two different devices, such as a television and a set-top box, making it an ideal solution for consolidating your remote controls. Its design prioritizes large, clearly identifiable buttons for comfortable operation.
2. Ürün Özellikleri
- Evrensel Uyumluluk: Controls a wide range of devices.
- Kendi Kendine Öğrenme Fonksiyonu: Easily acquires commands from existing remote controls.
- Two-Device Control: Manages up to two separate electronic devices.
- Büyük Düğmeler: Designed with oversized, clearly marked buttons for enhanced usability.
- Sezgisel Tasarım: Simple layout for straightforward operation.
- Quick Programming: Learning process typically takes less than one minute per button.
3. Kurulum
3.1. Pil Kurulumu
The Superior Electronics Simply SUPTLB001 remote control requires two (2) AAA batteries (not included) for operation.
- Uzaktan kumandanın arkasındaki pil bölmesi kapağını bulun.
- Kapağı aşağı doğru kaydırın veya mandalı bastırıp yukarı kaldırarak açın.
- İki adet AAA pil takın ve pozitif (+) ve negatif (-) terminallerin bölmenin içindeki işaretlerle doğru şekilde hizalandığından emin olun.
- Pil bölmesi kapağını yerine takın ve yerine güvenli bir şekilde oturana kadar kaydırın.
Image: Back of the remote control, indicating the battery compartment.
3.2. Learning Function Programming
The Simply SUPTLB001 remote learns functions directly from your original remote controls. You can program any button on the Simply remote to perform a function from your original remote.
- Prepare Remotes: Place the Simply SUPTLB001 remote and your original remote control on a flat surface, facing each other, with their infrared (IR) emitters aligned and approximately 1-3 cm apart.
- Öğrenme Moduna Girin: Basılı tutun GÜÇ button on the Simply remote for approximately 5 seconds until the red indicator light (usually near the power button) illuminates steadily. This indicates the remote is in learning mode.
- Select Device (A or B): If you are programming for Device A, press the A button. If for Device B, press the B button. The indicator light may flash to confirm selection.
- Select Button to Learn: Press the button on the Simply remote that you wish to program (e.g., V+ for Volume Up). The indicator light will start flashing slowly, waiting for a signal.
- İletim Sinyali: Press and hold the corresponding button on your original remote control (e.g., Volume Up) until the indicator light on the Simply remote flashes rapidly three times and then remains steady. This signifies successful learning.
- Diğer Düğmeler İçin Tekrarlayın: Repeat steps 4 and 5 for all other buttons you wish to program for the current device.
- Öğrenme Modundan Çık: Once all desired buttons are programmed, press the GÜÇ button on the Simply remote again to exit learning mode. The indicator light will turn off.
Not: If the indicator light flashes rapidly and then turns off without remaining steady, the learning process for that button may have failed. Ensure the remotes are properly aligned and try again. Some original remotes may require a longer press to transmit the signal effectively.
Resim: Ön view of the Simply SUPTLB001 remote control.
4. Kullanım Talimatları
After successful programming, you can use your Simply SUPTLB001 remote control to operate your devices.
- Cihaz Seçimi: Basın A button to control the first programmed device or the B button to control the second programmed device. The indicator light may briefly flash to confirm the selected device.
- Güç Açma/Kapatma: Basın GÜÇ seçili cihazı açma veya kapatma düğmesi.
- Ses Kontrolü: Kullanın V+ sesi artırmak için düğme ve V- Sesi azaltmak için.
- Program/Channel Control: Kullanın P+ button to go to the next program/channel and P- to go to the previous program/channel.
- AV Girişi: Basın AV button to switch between video input sources on your television.
The functionality of each button depends on how it was programmed during the learning process.
5. Bakım
- Temizlik: To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface.
- Pil Değişimi: Replace batteries when the remote's performance degrades or the indicator light does not respond as expected. Always replace both AAA batteries at the same time with new ones.
- Depolamak: Kumandayı kuru bir yerde, doğrudan güneş ışığından ve aşırı sıcaklıklardan uzakta saklayın.
6. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Uzaktan çalışmıyor. | Piller bitmiş veya yanlış takılmış. | Pilleri yeni AAA pillerle değiştirin ve kutupların doğru olmasına dikkat edin. |
| Learning function fails (indicator light flashes rapidly and turns off). | Remotes not aligned, too far apart, or original remote signal is weak. | Ensure remotes are 1-3 cm apart and IR emitters are aligned. Press and hold the original remote button firmly. Try again. |
| Programmed button does not control the device. | Button was not programmed correctly or device selection is wrong. | Re-program the button following the learning instructions. Ensure you have selected the correct device (A or B) before attempting to control it. |
| Uzaktan kumanda menzili zayıf. | Low batteries or obstruction between remote and device. | Replace batteries. Ensure a clear line of sight between the remote and the device's IR receiver. |
7. Özellikler
| Marka | Üstün Elektronik |
| Model Adı | Basitçe |
| Model Numarası | SUPTLB001 |
| Renk | Siyah |
| Bağlantı Teknolojisi | Infrared (IR) Learning Function |
| Uyumlu Cihazlar | Television, other IR-controlled devices |
| Maximum Devices Supported | 2 |
| Düğme Sayısı | 10 (Power, A, B, AV, V+, V-, P+, P-) |
| Pil Türü | 2 x AAA (not rechargeable) |
| Maksimum Menzil | 10 metre (yaklaşık 33 fit) |
| Boyutlar (Yaklaşık) | 16.5 cm (Uzunluk) x 4.5 cm (Genişlik) |
Resim: Yan view of the remote control with approximate dimensions.
8. Garanti ve Destek
This Superior Electronics Simply SUPTLB001 remote control comes with a manufacturer's warranty of 2 yıl satın alma tarihinden itibaren.
For warranty claims, technical assistance, or further support, please refer to the contact information provided with your purchase documentation or visit the official Superior Electronics webSite. Lütfen garanti geçerliliği için satın alma belgenizi saklayın.
