Nitrous Outlet 00-61002

Nitrous Outlet ProMax Çift Kanallı Aşamalı Kontrol Cihazı Kullanım Kılavuzu

Model: 00-61002

giriiş

The Nitrous Outlet ProMax Progressive Controller is an advanced system designed to optimize nitrous delivery for performance applications. It integrates system activation and safety functions with extensive tuning and traction aids. This manual provides essential information for the proper installation, operation, and maintenance of your ProMax controller.

Paket İçeriği

Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

Nitrous Outlet ProMax Controller and included accessories

Şekil 1: ProMax Progressive Controller, 20-pin connector, USB flash drive, and USB cable.

Kurulum ve Yükleme

Proper installation is crucial for the safe and effective operation of the ProMax controller. It is recommended that installation be performed by a qualified technician.

  1. Kontrolörün Montajı: Select a secure, dry location away from excessive heat and vibration. Ensure adequate space for wiring connections. The controller can be mounted using the integrated mounting tabs.
  2. Nitrous Outlet ProMax Controller installed in a vehicle's glove compartment

    Şekil 2: Example installation of the ProMax controller in a vehicle's glove compartment.

  3. Kablo Bağlantıları: Connect the 20-pin wiring harness to the controller. Carefully follow the wiring diagram provided in the separate wiring guide (not included in this manual) for connecting to vehicle power, ground, sensors (Vehicle Speed, Trans Brake, MAP Sensor, Wide Band O2, Nitrous Pressure, Fuel Pressure), and solenoid drivers.
  4. PC Bağlantısı: Connect the controller to a PC/laptop using the provided USB cable for initial setup and programming.
  5. Yazılım Kurulumu: Install the ProMax tuning software from the provided USB flash drive onto your PC.
  6. Nitrous Outlet ProMax Controller with wiring harness and USB cable

    Şekil 3: The ProMax controller with its wiring harness and USB cable for connection.

  7. Yazılım güncellemesi: Ensure the controller has the latest firmware. Firmware updates can be performed via the PC software.

Kullanım Talimatları

The ProMax controller offers extensive tuning capabilities. Refer to the software manual for detailed instructions on each function.

Bakım

The Nitrous Outlet ProMax controller is designed for reliability with minimal maintenance. Adhere to the following guidelines:

Sorun giderme

This section provides general troubleshooting steps. For specific issues, consult the detailed software manual or contact technical support.

SorunOlası NedenÇözüm
Denetleyici açılmıyorIncorrect wiring, blown fuse, loose connectionVerify power and ground connections. Check vehicle fuses. Ensure harness is securely connected.
Nitrous system not activatingIncorrect activation settings, solenoid driver issue, sensor malfunctionCheck activation parameters in software (TPS, WOT, RPM). Test solenoid drivers. Verify sensor inputs.
PC software not connecting to controllerUSB cable issue, driver not installed, controller not poweredEnsure controller is powered. Try a different USB port/cable. Reinstall USB drivers.
Inconsistent nitrous deliveryIncorrect progressive ramp settings, pressure fluctuations, solenoid issuesReview progressive ramp settings. Check nitrous bottle pressure. Inspect solenoids for proper function.

Özellikler

ÖzellikDetay
Model Numarası00-61002
ÜreticiNitrous Outlet
Ürün Boyutları6 x 7 x 12 inç
Ürün Ağırlığı3 pound
Solenoid Drivers2 independent, 70 Amp
Progressive Frequency10-30 Hz (adjustable by 1 Hz)
Tune StorageUp to 5 internal tune-ups
Ignition Retard Outputs2
GirişlerVehicle Speed, Trans Brake, MAP Sensor, Two Wide Band O2 sensors, Two Nitrous Pressure Sensors, Fuel Pressure Sensor
BağlantıUSB, CAN Bus Output
Özel ÖzelliklerUpdateable Firmware, Datalogging Capable, Multi-gear lockout, Resume and restart feature

Garanti Bilgileri

Nitrous Outlet products are manufactured to high standards. For specific warranty terms and conditions, please refer to the official warranty statement included with your product or visit the Nitrous Outlet official webSite. Satın alma belgenizi garanti talepleriniz için saklayın.

Yasal Uyarı: Nitrous Outlet is not responsible for parts not being smog-legal in your area. Many parts are not legal for sale or use in California, or on any pollution controlled vehicle. It is your responsibility to be aware of your local emissions laws and checking for legality of any parts purchased.

Destek

For technical assistance, questions regarding installation, operation, or troubleshooting, please contact Nitrous Outlet customer support:

İlgili Belgeler - 00-61002

Önview Nitrous Outlet Purge Kit Installation Guide and Wiring
Detailed installation instructions and wiring diagram for the Nitrous Outlet Purge Kit (Part #'s 00-62000, 00-62001, 00-62008). Learn how to improve nitrous system performance with this in-line purge system.
Önview Nitrous Outlet 4500 Flange Carburetor WOT Switch and Bracket Installation Guide
Detailed installation instructions and system wiring diagram for the Nitrous Outlet 4500 Flange Carburetor WOT Switch and Bracket (Part Number: 00-51045). Learn how to properly mount and wire this component for your vehicle's nitrous oxide system.
Önview Nitrous Outlet 2010-2015 Camaro Arka Kapak Nitrous Tüpü Braketi Montaj Kılavuzu
2010-2015 Camaro Arka Bagaj Kapağı 10 lb ve 15 lb Nitrojen Tüpü Braketi (Parça Numarası: 00-33002) için Nitrojen Çıkışı için kapsamlı montaj talimatları. Chevrolet Camaro'nuz için nitrojen tüpünüzü nasıl doğru şekilde monte edeceğinizi öğrenin.
Önview 2015-2020 Ford Mustang EcoBoost Nitröz Plaka Sistemi Kurulum Talimatları
2015-2020 Ford Mustang EcoBoost için tasarlanmış Nitrous Outlet 00-10192-XX Plaka Sistemi için kapsamlı kurulum kılavuzu. Araçlar, malzemeler, adım adım prosedürler ve güvenlik uyarıları içerir.
Önview 2015-2023 Dodge Hellcat 6.2L Hemi Blower Ara Parça Plakası Dönüşümü Kurulum Kılavuzu
Nitrous Outlet 2015-2023 6.2L Hemi Hellcat Challenger/Charger/Red Eye/Demon ve 2018-2019 Trackhawk Üfleyici Ara Parça Plaka Dönüşümü için adım adım kurulum talimatları. Gerekli aletler, sökme, plaka montajı, jet montajı, hat montajı ve son montajı içerir.
Önview 2007-14 Silverado/Sierra Anahtar Paneli Kurulum Talimatları
Chevrolet ve GMC tam boy pikaplar için tasarlanmış 2007-14 Silverado/Sierra Nitrous Çıkış Anahtar Paneli (Parça Numarası 00-11047) için ayrıntılı kurulum kılavuzu. Gerekli aletler, adım adım talimatlar ve kablo şemaları içerir.