DIRECTV RC73, 4336303112

DIRECTV RC73 IR/RF Uzaktan Kumanda Kullanım Kılavuzu

Model: RC73, 4336303112

Ürün Bittiview

The DIRECTV RC73 IR/RF Remote Control is designed for seamless control of your DIRECTV Genie system and other compatible devices. It features both Infrared (IR) and Radio Frequency (RF) technologies, allowing for flexible operation without needing to point the remote directly at the receiver when in RF mode. This remote offers a streamlined layout with essential buttons for navigating your entertainment.

Two DIRECTV RC73 remote controls side-by-side.

Image: Two DIRECTV RC73 remote controls, showcasing their black and white design and button layout.

Kurmak

1. Pil Kurulumu

Your DIRECTV RC73 remote control requires two AA batteries for operation. These batteries are typically included with your purchase.

  1. Uzaktan kumandanın arkasındaki pil bölmesi kapağını bulun.
  2. Slide the cover downwards or press the release tab (if present) and lift the cover off.
  3. İki adet AA pil takın ve pozitif (+) ve negatif (-) kutupların bölmenin içindeki göstergelerle doğru şekilde hizalandığından emin olun.
  4. Pil bölmesi kapağını yerine takın ve yerine güvenli bir şekilde oturana kadar kaydırın.
Two DIRECTV RC73 remotes with included AA batteries and a Genie Remote Guide.

Image: Two DIRECTV RC73 remote controls shown with two AA batteries and a small instruction guide, illustrating the contents of the package.

2. Pairing the Remote to Your DIRECTV Genie Receiver (RF Mode)

To enable RF (Radio Frequency) control, allowing you to operate your receiver without direct line-of-sight, follow these steps:

  1. Point the remote at your DIRECTV receiver.
  2. Aynı anda basılı tutun SESSİZ düğme ve SEÇME Uzaktan kumandadaki düğmeye yaklaşık 5 saniye basılı tutun.
  3. Release the buttons when the green light on the remote blinks twice.
  4. Using the number pad on the remote, enter the code 961.
  5. Basın KANAL YUKARI Bir kez düğmeye basın.
  6. Basın GİRMEK button (located below the number pad).
  7. Observe your TV screen. A message should appear indicating "Applying RF/IR Setup. Please Wait..." followed by "Your Remote is now setup for RF."
  8. Basın SEÇME (OK) button on the remote to confirm.

3. Programming the Remote to Your TV (Volume Control)

To control your TV's volume and power with the RC73 remote, you need to program it to your television. This process typically involves selecting your TV's brand from the receiver's menu.

  1. Basın MENÜ button on your DIRECTV remote.
  2. Navigate down using the KANAL AŞAĞI button to find and select Ayarlar.
  3. Once in Settings, use the directional arrows to navigate to the right until you find and select Uzaktan kumanda.
  4. From the Remote Control Setup menu, select Uzaktan Eşleştirme/Programlama.
  5. Seçmek Program Audio Device.
  6. You will be prompted to select your TV's brand. Use the keypad or navigate through the list to find your brand (e.g., Samsung). If you don't know the specific model, select "I don't know my model" if available.
  7. Follow the on-screen prompts to test the code. This usually involves pressing the GÜÇ button on the remote to see if your TV turns off.
  8. If the TV turns off, select "It Worked" to confirm the programming. If not, select "Try Next Code" and repeat the test until a working code is found.

Kullanım Talimatları

The DIRECTV RC73 remote control features a user-friendly layout for intuitive navigation and control of your DIRECTV system and connected devices.

Detailed diagram of the DIRECTV RC73 remote control with labels for each button's function.

Image: A detailed diagram of the RC73 remote, illustrating the function of each button for comprehensive control.

Tuş Düğmesi İşlevleri
Düğmeİşlev
ON/OFF (RC73)Turns both DIRECTV Receiver and TV ON or OFF at the same time. (Remote must be programmed for TV; HD DVR still records when off.)
REHBERPress once for On-Screen Guide. Press twice for programming grouped into categories.
MENÜAccesses the main menu for settings, recordings, and more.
LİSTEDisplays the LIST of your recorded programs.
EXITExits the current menu and returns to the previous channel viewed.
SEÇMESelects the item highlighted on screen.
BİLGİDisplays INFORMATION about the program now playing or highlighted in the On-Screen Guide.
VOL (Ses)Adjusts the volume of your TV or audio device (if programmed).
CH (Kanal)Kanalı yukarı veya aşağı değiştirir.
ÖNCEKİReturns to the PREVIOUS channel viewed.
RECORD (Red Circle)Records the program now playing or highlighted in the On-Screen Guide. Press twice to record the entire series.
SESSİZSesi kapatır.
TEKRAR OYNATReplays the previous six seconds.
GERİ SARMARewinds at increasing speeds—press up to four times.
OYNAT/DURDURPlays the current program. Press once while the program is playing to PAUSE.
TIR (-)Press for Guide Options while viewing On-Screen Guide. Press for playlist options while viewing playlist. Press to display last 6 digits of receiver ID, satellite signal type (SWiM or Multiswitch) and Internet status.
ADVANCEAdvances 30 seconds. Press and hold to jump ahead to the end of a recorded program.
HIZLI İLERLEMEFast-forwards at increasing speeds—press up to four times.
ENTER (Input)Press for Mini Guide while viewing your program and dismiss with EXIT. ENTER also replaces TV INPUT button: to cycle through the equipment connected to your TV, press and hold for three seconds until LED light at top turns green. Then scroll through inputs by pressing ENTER again.

Bakım

Pil Değişimi

When the remote's performance degrades or the green light no longer blinks during operation, it's time to replace the batteries. Always use two new AA batteries for optimal performance.

  1. Remove the battery compartment cover as described in the Setup section.
  2. Eski pilleri çıkarın.
  3. İki adet yeni AA pili, doğru kutuplara (+/-) dikkat ederek takın.
  4. Pil bölmesi kapağını yerine takın.

Temizlik

To maintain the remote's appearance and functionality, periodically wipe it with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the remote's surface or internal components.

Sorun giderme

Yaygın Sorunlar ve Çözümleri
SorunOlası NedenÇözüm
Remote not responding to receiver.Low or dead batteries; Remote not paired in RF mode; Obstruction between remote and receiver (if in IR mode).Replace batteries. Ensure remote is paired in RF mode (refer to Setup section). Remove any obstructions.
Volume or TV power buttons not working.Remote not programmed to TV.Program the remote to your TV (refer to Setup section, "Programming the Remote to Your TV").
Green light on remote blinks slowly or not at all.Pil gücü düşük.Pilleri hemen değiştirin.
Remote controls receiver but not client device (e.g., Genie Mini).Client device not properly paired or connected.Ensure the client device is correctly connected and powered on. Re-pair the remote with the client device if necessary (consult your Genie Mini's specific instructions).

Özellikler

Garanti ve Destek

For specific warranty information regarding your DIRECTV RC73 remote control, please refer to the documentation included with your original purchase or visit the official DIRECTV webSite. Garanti şartları ve koşulları değişiklik gösterebilir.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact DIRECTV customer service directly. Contact information can typically be found on your DIRECTV bill, their official website, or through your service provider.

Çevrimiçi Kaynaklar:

İlgili Belgeler - RC73, 4336303112

Önview DIRECTV Genie ve Evrensel Uzaktan Kumanda Kılavuzu
DIRECTV Genie ve Universal uzaktan kumandalarının işlevlerini anlamaya yönelik kapsamlı bir kılavuz; çeşitli DIRECTV alıcıları ve televizyonları için ayrıntılı düğme açıklamaları ve programlama talimatları içerir.
Önview DIRECTV Evrensel Uzaktan Kumanda Kılavuzu: Başlangıç ​​ve Programlama
DIRECTV evrensel uzaktan kumandanızı nasıl kullanacağınızı, düğme işlevlerini nasıl anlayacağınızı ve RC73 uzaktan kumandanızı kurumsal hesaplar için nasıl programlayacağınızı öğrenin. Kurulum talimatları ve özellikler dahildir.
Önview DIRECTV Wireless Genie Mini Kurulum ve Etkinleştirme Kılavuzu
Kusursuz video eğlencesi için yeni DIRECTV Wireless Genie Mini'nizi bağlama, kurma, etkinleştirme ve programlamaya ilişkin adım adım talimatlar.
Önview DIRECTV Genie 2 Sunucu Aktivasyonu ve Ekipman İade Talimatları
Yedek DIRECTV Genie 2 Sunucunuzu etkinleştirme ve eski cihazınızı iade ederek iade etme ücretlerinden kaçınmanıza yardımcı olacak adım adım kılavuz. Kurulum, eşleştirme ve iade prosedürlerini içerir.
Önview DIRECTV Genie 2 Ürün Kılavuzu - Özellikler, Teknik Özellikler ve Güvenlik Bilgileri
DIRECTV Genie 2 uydu alıcısı için donanım ayrıntılarını, özellikleri, sorun gidermeyi, LED göstergelerini, güvenlik önlemlerini ve garanti bilgilerini kapsayan kapsamlı ürün kılavuzu. Kurulum ve kullanım kılavuzu da içerir.
Önview DIRECTV Wireless Genie Mini C41W Kurulum Kılavuzu
Ev eğlence sisteminizi geliştirmek için DIRECTV Wireless Genie Mini (Model C41W) cihazını Genie HD DVR'ınıza kurma ve bağlama konusunda adım adım kılavuz.