1. Ürün Bittiview
The Digoo DG-HOSA Smart Home Security Alarm System is a comprehensive security solution designed to protect your home. This system supports Wi-Fi, GSM, 2G, and 3G networks, offering flexible connectivity options. It features an intuitive control panel with a keypad and display, along with various wireless sensors for motion detection and door/window monitoring. The system can be controlled remotely via the "Easy security" mobile application, providing real-time alerts and management capabilities.

Figure 1.1: Complete Digoo DG-HOSA Smart Home Security Alarm System kit, including the main control panel, PIR motion detector, door/window sensors, and remote controllers.
2. Kutuda Neler Var?
Paketi açtığınızda lütfen aşağıdaki bileşenlerin tamamının mevcut olduğundan emin olun:
- 1 x Digoo DG-HOSA Home Security Alarm Host (Main Control Panel)
- 1 x Wireless PIR Detector (Passive Infrared Motion Sensor)
- 2 x Uzaktan Kumanda
- 2 x Kapı/Pencere Sensörü
- 4 x Assist Installation Screws
- 4 x Wall-in Fixed Rubber Blocks
- 1 x 1M USB Power Cable (for 5V power supply)

Figure 2.1: Main control panel shown with a PIR motion detector, a door/window sensor, and a remote controller, representing key components of the system.
3. Kurulum Kılavuzu
3.1 İlk Çalıştırma ve Ağ Bağlantısı
- Gücü bağlayın: Use the provided USB power cable to connect the alarm host to a 5V power source.
- SIM Kart Takılması (İsteğe Bağlı): If using GSM/3G network, insert a compatible SIM card into the designated slot on the side of the control panel.
- WiFi Yapılandırması:
- Download the "Easy security" app from your smartphone's app store.
- Ensure your smartphone and the alarm host are connected to the same Wi-Fi network during the initial setup.
- Follow the in-app instructions to pair the alarm host with your Wi-Fi network.

Şekil 3.1: Yan view of the Digoo DG-HOSA control panel, highlighting the USB power port, SIM card slot, and reset button for initial setup and connectivity.
3.2 Sensor Installation and Pairing
The system supports up to 99 sensors. Each sensor needs to be installed and paired with the main control panel.
- PIR Hareket Dedektörü:
- Install the PIR detector in a corner or on a wall where it can cover the desired area, avoiding direct sunlight or heat sources.
- Ensure the detector is at an appropriate height (typically 2-2.2 meters) for optimal coverage.
- Pair the detector with the alarm host via the "Easy security" app or directly through the control panel's menu.
- Kapı/Pencere Sensörleri:
- Mount the two parts of the door/window sensor (magnet and main unit) on the door/window frame and the moving part, ensuring they are aligned and within 1 cm of each other when closed.
- Pair the sensors with the alarm host using the same method as the PIR detector.
- Uzaktan Kumandalar:
- The remote controllers are typically pre-paired. If not, follow the pairing instructions in the app or manual.


Figure 3.2: Individual components: Wireless PIR Motion Detector (left) and Wireless Door/Window Sensor (right), essential for comprehensive home security coverage.
4. Kullanım Talimatları
4.1 Kontrol Panelini Kullanma
The main control panel features a touchscreen display and a numeric keypad for direct interaction.
- Silahlanma: Press the "ARM" button or enter your passcode followed by "ARM" to activate the alarm system.
- Silahsızlanma: Press the "DISARM" button or enter your passcode followed by "DISARM" to deactivate the alarm system.
- SOS İşlevi: In an emergency, press the "SOS" button on the panel or remote controller to trigger an immediate alarm and send alerts to pre-programmed contacts.
- Ayarlar: Navigate through the menu using the touchscreen to adjust system settings, add/remove sensors, set up alarm zones, and configure network preferences.

Şekil 4.1: Ön view of the Digoo DG-HOSA control panel, displaying the touchscreen interface, numeric keypad, and function buttons for system control.
4.2 Mobile App Control ("Easy security")
The "Easy security" app provides full remote control and monitoring capabilities for your alarm system.
- Uzaktan Kurma/Devre Dışı Bırakma: Activate or deactivate the system from anywhere with an internet connection.
- Gerçek Zamanlı Bildirimler: Receive instant push notifications for alarm events, low battery alerts, and system status changes.
- Sensör Yönetimi: Add, remove, or configure individual sensors and their respective defense zones.
- Call and Message Settings: Set up emergency contacts to receive calls and SMS alerts during an alarm.
- Sistem durumu: View the current status of your alarm system and connected sensors.
5. Bakım
- Pil Değişimi: Replace batteries in wireless sensors and remote controllers as indicated by low battery alerts on the control panel or app.
- Temizlik: Kontrol panelini ve sensörleri yumuşak, kuru bir bezle nazikçe silin. Aşındırıcı temizleyiciler veya çözücüler kullanmaktan kaçının.
- Donanım Yazılımı Güncellemeleri: Periodically check for firmware updates via the "Easy security" app to ensure optimal performance and security.
- Ağ Kararlılığı: Ensure a stable Wi-Fi and cellular network connection for reliable operation and remote access.
6. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Sistem Wi-Fi'ye bağlanmıyor. | Incorrect Wi-Fi password; Host and phone not on same network during setup; Weak Wi-Fi signal. | Verify password; Ensure both devices are on the same 2.4GHz Wi-Fi network; Move host closer to router. |
| Sensors not triggering alarm | Sensor not paired; Low sensor battery; Sensor placed incorrectly. | Re-pair sensor; Replace sensor battery; Adjust sensor position according to installation guidelines. |
| Bildirim yok | App notification settings disabled; Network issues; App not running in background. | Enable notifications in app and phone settings; Check internet connection; Ensure app is allowed to run in background. |
| SOS function not calling contacts | No SIM card; Invalid SIM card; Emergency contacts not programmed correctly. | Install active SIM card; Verify SIM card balance/plan; Program emergency contacts via app or control panel. |
7. Özellikler
| Özellik | Detay |
|---|---|
| Marka | DIGOO |
| Örnek | DIGOOWolifui253 (DG-HOSA) |
| Bağlantı Teknolojisi | Wireless (Wi-Fi, GSM, 2G, 3G) |
| Güç Kaynağı | Battery Powered (5V USB Power Cable included) |
| Kontrol Yöntemi | App ("Easy security"), Control Panel, Remote Control |
| Uyumlu Cihazlar | Akıllı telefon |
| Uyarı Tipi | Audio Only, Motion Only (configurable) |
| Desteklenen Maksimum Sensör Sayısı | 99 |
| Ürün Boyutları (U x G x Y) | 15 x 7 x 21 Santimetre |
| Ürün Ağırlığı | 408 g (0.9 Pound) |
| Piller Gerekli | 1 Lithium Polymer battery (for host, typically internal/rechargeable) |
| Kurulum Türü | Screw-In (for mounting) |
8. Garanti ve Destek
For warranty information and technical support, please refer to the official DIGOO webSite üzerinden satın alabilir veya müşteri hizmetleriyle iletişime geçebilirsiniz. Garanti talepleriniz için satın alma belgenizi saklayın.
Çevrimiçi Kaynaklar:
- Official DIGOO Webalan: www.digoo.cc (Not: Bu bir yer tutucudur URL, please refer to actual product documentation for correct support links.)
- "Easy security" App Support: Check the app's 'Help' or 'About' section for in-app support options.





