CarAudio Systems TF-NTG5 Hareket Halindeyken Görüntü Arayüzü Kullanım Kılavuzu

giriiş

This manual provides detailed instructions for the installation, operation, and maintenance of the CarAudio Systems TF-NTG5 Video-in-Motion Interface. This device is designed to enable video playback and display of auxiliary media menus (e.g., from retrofitted DVD players or rear cameras) on Mercedes Benz vehicles equipped with Comand Online NTG5, NTG5.1, and NTG5.5 navigation systems while the vehicle is in motion.

The TF-NTG5 interface is a Plug & Play solution, manufactured in Germany, and supports updates via USB.

Güvenlik Bilgileri

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in damage to the device, vehicle, or personal injury.

• Installation should only be performed by qualified personnel to avoid damage to the vehicle's electrical system.
• Montaja başlamadan önce aracın kontak anahtarının kapalı ve akünün bağlantısının kesilmiş olduğundan emin olun.
• Do not attempt to modify or disassemble the interface.
• This device is intended for passenger use only. The driver must always maintain full attention to the road and traffic conditions. Viewing dynamic images while driving can be distracting and may lead to accidents.
• Adhere to all local laws and regulations regarding in-car entertainment systems.

Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

• 1x CarAudio Systems TF-NTG5 Video-in-Motion Interface Module
• 1x Plug & Play Wiring Harness
• 1x USB Cable (for updates)
• 1x Kullanım Kılavuzu (bu belge)

Kurulum ve Yükleme

The TF-NTG5 interface is designed for Plug & Play installation. No coding is required.

Kurulum Öncesi Adımlar

• Aracı düz bir zemine park edin ve el frenini çekin.
• Kontağı kapatın ve anahtarı çıkarın.
• Elektriksel kısa devreleri önlemek için aracın aküsünü ayırın.
• Access the rear of the Comand Online head unit in your Mercedes Benz vehicle. This typically involves removing trim panels and the head unit itself. Refer to your vehicle's service manual for specific instructions on head unit removal.

Arayüzün Bağlanması

1. Locate the main wiring harness connected to the back of your Comand Online unit.
2. Disconnect the original harness from the Comand Online unit.
3. Connect the supplied Plug & Play wiring harness from the TF-NTG5 interface in-line with the original harness. The interface harness will have connectors that match the original vehicle connectors and the Comand Online unit.
4. Connect the main module of the TF-NTG5 interface to the new wiring harness. Ensure all connections are secure.

DIP Anahtar Yapılandırması

The TF-NTG5 module features DIP switches for specific configurations. Refer to the image below for the location of the DIP switches.

Şekil 1: CarAudio Systems TF-NTG5 Interface Module and Wiring. The module features a label indicating "TV-500 Video-in-motion Interface" and a set of red DIP switches (1-6) for configuration. The accompanying wiring harness includes various connectors for integration with the vehicle's Comand Online system.

The default configuration for video-in-motion activation is usually pre-set. Consult the specific instructions provided with your unit or the manufacturer's website for detailed DIP switch settings if custom functionality is desired. For standard video-in-motion, typically all switches are in the 'OFF' position or as specified by the manufacturer for your specific vehicle model.

Yükleme sonrası

• Secure the TF-NTG5 module and wiring harness in a safe location behind the head unit, ensuring no wires are pinched or interfere with moving parts.
• Aracın aküsünü tekrar bağlayın.
• Reinstall the head unit and trim panels.

Kullanım Talimatları

Once installed, the TF-NTG5 interface automatically activates the video-in-motion function for your Mercedes Benz Comand Online system.

• Turn on the vehicle's ignition and the Comand Online system.
• Navigate to the desired video source (e.g., DVD player, auxiliary input, or rear camera feed) on your Comand Online display.
• The video or auxiliary menu should now be viewable even when the vehicle is in motion.

USB Update Functionality

The interface supports firmware updates via its USB port.

1. Download the latest firmware from the official Caraudio-Systems webalan.
2. Ürün yazılımını kopyalayın file USB flash belleğe.
3. Connect the USB flash drive to the USB port on the TF-NTG5 module (if accessible without disassembly, otherwise temporary removal of the head unit may be required).
4. Follow the specific update procedure outlined in the firmware download instructions.

Bakım

The CarAudio Systems TF-NTG5 interface requires minimal maintenance.

• Modülü ve bağlantı noktalarını toz ve nemden uzak tutun.
• Do not use harsh chemicals or abrasive cleaners on the unit.
• Bağlantıların güvenli kalmasını sağlamak için düzenli olarak kontrol edin.
• Ensure the vehicle's electrical system is in good working order to prevent damage to the interface.

Sorun giderme

If you experience issues with your TF-NTG5 interface, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Caraudio-Systems customer support.

Özellikler

Garanti ve Destek

For warranty information and technical support, please refer to the official Caraudio-Systems webYetkili satıcınızla iletişime geçin veya siteyi ziyaret edin. Satın alma belgenizi garanti talepleriniz için saklayın.