1. Giriş
The TES 1360A Humidity/Temperature Meter is a precision instrument designed for accurate measurement of temperature, relative humidity, and dew point temperature. It features a clear three-line LCD display for simultaneous viewing of measured values. The meter includes advanced functions such as adjustable alarm levels with visual and audio indications, and a memory function to store and recall up to 99 sets of data.
- Çift Ekran: Shows multiple readings concurrently.
- Yüksek Çözünürlük: Provides precise measurements with 0.1% RH, 0.1°C, and 0.1°F resolution.
- Geniş Ölçüm Aralığı: Capable of measuring a broad spectrum of relative humidity and temperature values.
- Çiy Noktası Sıcaklığı: Automatically computes and displays dew point.
- Veri Belleği: Stores and allows recall of up to 99 data sets.
2. Güvenlik Bilgileri
Please read and understand all safety instructions before operating the TES 1360A meter. Failure to follow these instructions may result in injury or damage to the device.
- Do not expose the meter to extreme temperatures, direct sunlight, or high humidity for extended periods.
- Avoid dropping the meter or subjecting it to strong impacts.
- Do not attempt to disassemble or modify the meter. Refer all servicing to qualified personnel.
- Ensure correct battery polarity when installing batteries. Remove batteries if the meter will not be used for a long time to prevent leakage.
- Ölçüm cihazını güçlü elektromanyetik alanlardan uzak tutun.
- Clean the meter with a soft, dry cloth. Do not use abrasive cleaners or solvents.
3. Ürün Bittiview
Familiarize yourself with the components of your TES 1360A Humidity/Temperature Meter.
Figure 1: TES 1360A Humidity/Temperature Meter. This image shows the meter's main body, the sensor probe at the top, the LCD display, and various control switches and buttons for temperature, humidity, dew point, hold, power, and memory functions.
Temel Bileşenler:
- Sensör Probu: Located at the top, responsible for detecting humidity and temperature.
- LCD Ekran: Three-line display showing humidity, temperature, and dew point readings.
- Function Switches:
- TEMP / %RH / DEW Switch: Selects the primary measurement displayed.
- °C / °F Switch: Santigrat ve Fahrenheit sıcaklık birimleri arasında geçiş yapar.
- HOLD / ON / OFF Switch: Controls power and data hold function.
- OKU Butonu: Used to recall stored data from memory.
- MEMORY Button: Used to save current readings to memory.
- Pil Bölmesi: Arka tarafta bulunan 9V pil, cihazın içinde yer almaktadır.
4. Kurulum
4.1 Pil Kurulumu
- Ölçüm cihazının arkasındaki pil bölmesi kapağını bulun.
- Bölmeyi açmak için kapağı kaydırın veya açın.
- Insert one 9V battery (006P 9V, IEC 6F22, or NEDA 1604 type) into the compartment, ensuring correct polarity (+/-). A 9V battery is included with the meter.
- Pil bölmesi kapağını güvenli bir şekilde yerine takın.
4.2 İlk Güç Açma
After installing the battery, slide the ON/OFF switch to the "ON" position. The LCD display will illuminate and show current readings.
5. Operasyon
5.1 Ölçüm Alma
- Turn on the meter by sliding the ON/OFF switch to "ON".
- Position the sensor probe in the environment where you wish to take measurements. Allow a few moments for the readings to stabilize.
- The LCD will display the current temperature, relative humidity, and dew point temperature simultaneously.
- To change the primary displayed measurement (e.g., larger font), use the TEMP / %RH / DEW switch.
- To switch between Celsius (°C) and Fahrenheit (°F) temperature units, use the °C / °F switch.
5.2 Veri Tutma Fonksiyonu
To freeze the current readings on the display, slide the HOLD switch to the "HOLD" position. The readings will remain on the screen until the switch is moved back to "ON" or "OFF".
5.3 Data Memory Function
Bu ölçüm cihazı 99 adede kadar ölçüm verisi setini saklayabilir.
- Verileri Kaydetmek: Ölçüm yaparken, basın. HAFIZA button briefly to save the current readings. The display may briefly show a memory location number.
- Verilerin Geri Çağrılması: Basın OKUMAK button to cycle through the stored data sets. Each press will display the next stored record.
- Belleği Temizleme: Refer to the full instruction manual for details on clearing stored data, if this function is available.
5.4 Alarm Level Indication
The TES 1360A can compare measured values against two adjustable levels for each quantity (temperature, humidity, dew point). If a measured value exceeds or falls below these set levels, the corresponding value on the display will blink, and an audible alarm (if enabled) will sound. Consult the full manual for instructions on setting these alarm levels.
6. Bakım
6.1 Temizlik
Sayaçın c kısmını silin.asinyumuşak bir g ile, damp cloth. Do not use harsh chemicals, solvents, or abrasive cleaners, as these can damage the plastic and electronic components. Ensure no liquid enters the sensor area or other openings.
6.2 Pil Değişimi
When the battery indicator appears on the display, or if the meter fails to power on, replace the 9V battery as described in Section 4.1. Always dispose of used batteries responsibly according to local regulations.
6.3 Depolama
If the meter will not be used for an extended period, remove the battery to prevent leakage. Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures.
7. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Sayaç açılmıyor. | Pil bitmiş veya yanlış takılmış. | Pil kutuplarını kontrol edin. Yeni bir 9V pil ile değiştirin. |
| Hatalı okumalar. | Sensor dirty or damaged; environmental interference; meter not calibrated. | Clean the sensor carefully. Move away from strong electromagnetic fields. If issues persist, contact customer support for calibration or repair. |
| Display shows "LO" or "HI". | Measurement is outside the meter's specified range. | Ensure the environment's conditions are within the meter's operating range (see Specifications). |
| Hafıza fonksiyonu çalışmıyor. | Memory full; incorrect button press. | Ensure you are pressing the correct button (MEMORY to save, READ to recall). If memory is full, consult the full manual for clearing instructions. |
8. Özellikler
| Genel Özellikler | |
|---|---|
| Marka | TES |
| Örnek | TES 1360A |
| Ürün Boyutları | 270mm(L) × 68mm(W) × 25mm(H) (approx. 10.63"H x 2.68"W) |
| Ürün Ağırlığı | Approx. 210g (including battery) / 1.1 pounds |
| Güç Kaynağı | Single 9V Battery (006P 9V, IEC 6F22, or NEDA 1604) |
| Pil Ömrü | Yaklaşık 140 saat |
| Çalışma Sıcaklığı ve Nem | 0°C to 60°C (32°F to 140°F), below 95% RH (non-condensing) |
| Ekran Stili | LCD |
| Malzeme | Plastik |
| Aksesuarlar | Instruction manual, Battery, Carry case |
| Ölçüm Özellikleri | |
| Nem Ölçüm Aralığı | %10 ~ %95 RH |
| Nem Çözünürlüğü | % 0.1 bağıl nem |
| Nem Doğruluğu |
|
| Sıcaklık Ölçüm Aralığı | -20°C ~ +60°C (-4°F ~ +140°F) |
| Sıcaklık Çözünürlüğü | 0.1°C, 0.1°F |
| Sıcaklık Doğruluğu |
|
9. Garanti ve Destek
For specific warranty information regarding your TES 1360A Humidity/Temperature Meter, please refer to the documentation provided at the time of purchase or contact the seller directly. Warranty terms may vary based on region and retailer.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact TES customer support or the authorized distributor from whom you purchased the product. You can also visit the official TES store for more information: TES Official Store.
