1. Ürün Bittiview
The Genasun GV-10-Li-14.2V is a high-performance Maximum Power Point Tracking (MPPT) solar charge controller designed specifically for 4S Lithium Iron Phosphate (LiFePO4) batteries. It efficiently converts solar panel power to charge your battery system, ensuring optimal performance and longevity.
Resim 1.1: Ön view of the Genasun GV-10-Li-14.2V MPPT Charge Controller, showing the model name, battery type, charging current, and LED indicators.
Temel Özellikler:
- Optimize Edilmiş Şarj: Max. recommended panel power 140 W, 10.5 A charging current, charge profile CC/CV at 14.2 V for 4S LiFePO4 (3.55 V per cell).
- High-Speed MPPT: Features a tracking speed of 15 Hz (15 times per second) for efficient power harvesting.
- Yüksek Verimlilik: Achieves 98.3% peak efficiency with a tiny night consumption of 0.9 mA.
- Gelişmiş Korumalar: Includes electronic protections for reverse panel and battery polarity.
- Durability & Compliance: Made in the USA, certified cETLus, Class 1 Div.2, and conforms to CE, FCC, RoHS standards.
2. Kurulum ve Kurulum
Proper installation is crucial for the safe and efficient operation of your Genasun GV-10-Li-14.2V charge controller. Follow these steps carefully.
2.1 Kablolama Şeması
Image 2.1: Wiring diagram for the Genasun GV-10-Li-14.2V controller, illustrating connections for a 4S LiFePO4 battery and a solar panel. The diagram shows the positive and negative terminals for both battery and panel connections, and the location of the multicolor LED indicator.
2.2 Bağlantı Adımları
- Önce pili bağlayın: Connect the positive (+) and negative (-) terminals of your 4S LiFePO4 battery to the 'BATT' terminals on the charge controller. Ensure correct polarity. The controller will not operate without a battery connected.
- Güneş Panelini Bağlayın: Connect the positive (+) and negative (-) terminals of your solar panel to the 'PANEL' terminals on the charge controller. Ensure correct polarity.
- Bağlantıları Doğrulayın: Double-check all connections for correct polarity and secure fastening. Incorrect polarity can damage the unit, although the controller has built-in protection.
The controller is designed for simple plug-and-play operation. Once connected, it will automatically begin tracking the maximum power point of your solar panel and charging the battery.
3. Kullanım Talimatları
The Genasun GV-10-Li-14.2V operates autonomously once connected. The multicolor LED provides status indications.
3.1 LED Gösterge Durumu
- Yeşil (Katı): Battery is fully charged, or the controller is in standby mode (e.g., no solar input, or battery is at float voltage).
- Yeşil (Yanıp Sönüyor): Battery is currently charging. The flash rate may vary with charging intensity.
- Kırmızı (Düz): Indicates an error condition. This could be due to incorrect wiring, over-voltage from the panel, or a battery fault. Disconnect all power and re-check connections.
3.2 MPPT Operation
The controller continuously tracks the maximum power point of the solar panel to extract the most power available. This high-speed tracking (15 times per second) ensures optimal energy harvest even under rapidly changing light conditions.
4. Bakım
The Genasun GV-10-Li-14.2V is designed for minimal maintenance. However, periodic checks can ensure long-term reliability.
- Görsel Muayene: Kontrol ünitesini ve tüm kabloları periyodik olarak hasar, korozyon veya gevşek bağlantı belirtileri açısından inceleyin.
- Temizlik: Keep the controller free from dust, dirt, and moisture. Use a dry, soft cloth for cleaning. Do not use harsh chemicals or abrasive materials.
- Havalandırma: Ensure the controller is installed in a location with adequate airflow to prevent overheating, although its design is highly efficient.
5. Sorun Giderme
If you encounter issues with your Genasun GV-10-Li-14.2V, refer to the following troubleshooting guide.
- LED aktivitesi yok:
- Ensure the battery is connected first and has sufficient voltage. The controller requires battery power to operate.
- Pil polaritesini kontrol edin.
- Red LED (Error):
- Disconnect both the solar panel and the battery.
- Re-connect the battery first, then the solar panel, ensuring correct polarity for both.
- Güneş paneli hacminin doğru olduğunu doğrulayıntage, kontrol cihazının maksimum giriş hacmini aşmaz.tage (34V max).
- Pil Şarj olmuyor:
- Check solar panel connections and ensure the panel is receiving adequate sunlight.
- Pil hacminintage is below the full charge voltage (14.2V). If the battery is already full, the controller will enter standby mode (solid green LED).
- Ensure the solar panel is producing sufficient voltage ve akım.
If problems persist after following these steps, contact Genasun customer support.
6. Özellikler
| Özellik | Şartname |
|---|---|
| Örnek | GV-10-Li-14.2V |
| Pil Türü | 4S LiFePO4 (Lithium Iron Phosphate) |
| Şarj Akımı | 10.5A |
| Profesyonel Şarjfile | CC/CV at 14.2 V (3.55 V per cell) |
| Maksimum Önerilen Panel Gücü | 140 B |
| Maks. Panel Cilttage (OCV) | 34V |
| MPPT Tracking Speed | 15 Hz (15 times per second) |
| En Yüksek Verimlilik | %98.3 |
| Gece Tüketimi | 0.9mA |
| Korumalar | Reverse panel and battery polarity |
| Malzeme | Metal |
| Ürün Ağırlığı | 6.6 ons (0.41 Pound) |
| Sertifikalar | cETLus, Class 1 Div.2, CE, FCC, RoHS |
| UPC | 650267227261 |
7. Garanti Bilgileri
The Genasun GV-10-Li-14.2V MPPT Charge Controller comes with a 5 Yıllık GarantiBu garanti, normal kullanım koşullarındaki malzeme ve işçilik kusurlarını kapsar. Garanti talepleriniz için lütfen satın alma belgenizi saklayın.
8. Destek
For technical assistance, warranty claims, or further inquiries regarding your Genasun GV-10-Li-14.2V MPPT Charge Controller, please contact Genasun customer support. As a product made in the USA, dedicated support is available to assist you.
Image 8.1: Genasun brand logo.
