GATEMAN WF20 Parmak İzi Dijital Kapı Kilidi Kullanım Kılavuzu

1. Giriş

This manual provides detailed instructions for the installation, operation, and maintenance of your GATEMAN WF20 Fingerprint Digital Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and security. Keep this manual for future reference.

Güvenlik Önlemleri

• Kilidi kendiniz sökmeye veya tamir etmeye çalışmayın. Yetkili servis personeliyle iletişime geçin.
• Avoid exposing the lock to direct water spray or excessive humidity.
• Yalnızca belirtilen AA alkalin pilleri kullanın. Eski ve yeni pilleri veya farklı pil türlerini karıştırmayın.
• Ensure the door is properly aligned and closes smoothly before installing the lock.

2. Ürün Bittiview

The GATEMAN WF20 is a keyless digital door lock featuring fingerprint recognition and a touch keypad for secure entry. It is designed for modern homes and offices, offering convenience and enhanced security.

Bileşenler

Familiarize yourself with the main components of your GATEMAN WF20 lock:

Figure 2.1: Front Panel of the GATEMAN WF20 Lock. This image displays the sleek black front panel of the GATEMAN WF20 digital door lock, featuring a numeric touch keypad and a fingerprint scanner located at the top. The brand name 'GATEMAN' is visible above the scanner.

Figure 2.2: Interior Panel of the GATEMAN WF20 Lock. This image shows the interior side of the GATEMAN WF20 lock, highlighting the manual thumb turn for locking/unlocking from inside, an 'OPEN/CLOSE' button, and the battery cover. The 'Smart Living' logo is also visible.

• Parmak izi tarayıcısı: Located on the top front panel for biometric authentication.
• Dokunmatik Tuş Takımı: Numeric pad on the front panel for PIN code entry.
• Manual Thumb Turn: On the interior panel for manual locking and unlocking.
• AÇ/KAPAT Düğmesi: On the interior panel for quick locking/unlocking.
• Batarya kapağı: On the interior panel, protecting the battery compartment.
• Sıfırlama Düğmesi: Small button on the bottom front for system reset.

3. Kurulum ve Kurulum

Proper installation is crucial for the optimal performance of your GATEMAN WF20 lock. It is recommended to have the lock installed by a qualified professional.

3.1 Pil Kurulumu

1. Remove the battery cover from the interior unit.
2. Insert four (4) new AA alkaline batteries, ensuring correct polarity (+/-).
3. Replace the battery cover. The lock will emit a sound indicating it is powered on.

3.2 Initial Setup and Master PIN Registration

Upon first power-up or after a factory reset, you must register a Master PIN code.

1. İç ünitedeki pil kapağını açın.
2. Press the [Registration] button (usually located near the battery compartment).
3. On the front keypad, enter your desired 4-12 digit Master PIN code.
4. Press the [*] button to confirm.
5. Re-enter the Master PIN code.
6. Press the [*] button to confirm. A confirmation sound will indicate successful registration.

Not: The Master PIN code is essential for managing other user PINs and fingerprints. Keep it confidential.

4. Kullanım Talimatları

4.1 Parmak İzi ile Kilit Açma

Figure 4.1: Fingerprint Scanning. This image illustrates a user placing their finger on the fingerprint scanner of the GATEMAN WF20 lock for biometric authentication. A red line indicates the scanning area.

1. Kayıtlı parmağınızı parmak izi tarayıcısının üzerine düz bir şekilde yerleştirin.
2. Hold your finger steady until the lock emits a confirmation sound and unlocks.

4.2 PIN Kodu ile Kilidi Açma

1. Etkinleştirmek için tuş takımına dokunun.
2. Enter your registered 4-12 digit PIN code.
3. Press the [*] button. The lock will emit a confirmation sound and unlock.

4.3 Kapının Kilitlenmesi

• Otomatik Kilitleme: The lock is set to automatically lock after a few seconds when the door is closed.
• Dışarıdan manuel kilitleme: Touch the keypad or press the '#' button.
• Manuel Kilitleme (içeriden): Press the 'OPEN/CLOSE' button or turn the manual thumb turn.

4.4 Kullanıcı Parmak İzlerinin Kaydedilmesi

1. Pil kapağını açın ve [Kayıt] düğmesine basın.
2. Enter the Master PIN code followed by the [*] button.
3. Follow the voice prompts or indicator lights to register the fingerprint. Typically, you will be asked to scan the finger multiple times.
4. Press the [Registration] button again to exit registration mode.

4.5 Registering User PIN Codes

1. Pil kapağını açın ve [Kayıt] düğmesine basın.
2. Enter the Master PIN code followed by the [*] button.
3. Enter the desired 4-12 digit user PIN code.
4. Press the [*] button to confirm.
5. Re-enter the user PIN code.
6. Press the [*] button to confirm. A confirmation sound will indicate successful registration.
7. Press the [Registration] button again to exit registration mode.

5. Bakım

5.1 Pil Değişimi

The lock will provide a low battery warning (audible alarm or indicator light) when batteries are running low. Replace all four AA batteries promptly.

1. İç ünitedeki pil kapağını çıkarın.
2. Tüm eski pilleri çıkarın.
3. Insert four (4) new AA alkaline batteries, observing correct polarity.
4. Pil kapağını yerine takın.

Not: Your registered PIN codes and fingerprints will be retained during battery replacement.

5.2 Temizlik

• Kilidin yüzeyini yumuşak, kuru bir bezle silin.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.
• Keep the fingerprint scanner and keypad clean and free of dust or debris for optimal performance.

6. Sorun Giderme

7. Özellikler

• Modeli: WF-20
• Marka: KAPI GÖREVLİSİ
• Kilit Tipi: Biometric, Digital
• Güç Kaynağı: Battery powered (4 AA batteries required)
• Malzeme: Other (durable composite/metal)
• Stil: Modern
• Renk: Siyah
• Kontrol Yöntemi: Touch, Hand Control
• Özel Özellikler: Anahtarsız giriş
• Ürün Ağırlığı: 907 gr
• Koli Ölçüleri: 30.48x20.32x5.08 cm

8. Garanti ve Destek

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official GATEMAN webSite. Satın alma belgeniz olarak satın alma fişinizi saklayın.

For further assistance, you may contact the retailer where the product was purchased.