NVIDIA 900-2G610-0000-000

NVIDIA Tesla P40 Passive Cooling GPU Instruction Manual

Model: 900-2G610-0000-000

1. Giriş

The NVIDIA Tesla P40 is a high-performance GPU accelerator designed for deep learning deployment and artificial intelligence applications. Built on the NVIDIA Pascal architecture, it provides significant computational power for accelerating demanding workloads. This manual provides essential information for the proper installation, operation, and maintenance of your Tesla P40 GPU.

NVIDIA Tesla P40 GPU, front angled view showing the passive heatsink and PCIe bracket.

Şekil 1: Ön açılı view of the NVIDIA Tesla P40 GPU, highlighting its passive cooling design and PCIe interface.

2. Temel Özellikler

  • Seri: Tesla P40, Model: 900-2G610-0000-000
  • GPU Mimarisi: Nvidia paskal
  • Tek Hassasiyetli Performans: 12 TeraFLOPS
  • Integer Operations (INT8): 47 TOPS (Tera-Operations per Second)
  • GPU Belleği: 24 GB GDDR5
  • Bellek Bant Genişliği: 346 GB/s
  • Sistem Arayüzü: PCI Express 3.0 x16
  • Maksimum Güç: 250W
  • Enhanced Programmability: With Page Migration Engine
  • ECC Protection: Evet
  • Server-Optimized: For Data Center Deployment
  • Hardware-Accelerated Video Engine: 1x Decode Engine, 2x Encode Engine

3. Kurulum Kılavuzu

3.1 Kurulum Öncesi Kontroller

  • Sistem Uyumluluğu: Ensure your server or workstation has an available PCI Express 3.0 x16 slot.
  • Güç Kaynağı: A robust power supply unit (PSU) capable of providing sufficient power (up to 250W for the GPU) and equipped with the necessary 8-pin CPU power cable (EPS12V) is required. Standard PCIe power cables may not be compatible or sufficient.
  • Soğutma: The Tesla P40 features passive cooling and requires adequate system airflow within the server chassis to dissipate heat effectively. Ensure your server has sufficient fan configuration for proper cooling.
  • BIOS Ayarları: Verify that your motherboard BIOS supports and has "Above 4G decoding" enabled, typically found under boot options or PCIe settings.

3.2 Fiziksel Kurulum

  1. Power down your system and disconnect all power cables.
  2. Open your computer case and locate an available PCI Express 3.0 x16 slot.
  3. Carefully insert the NVIDIA Tesla P40 into the PCIe slot, ensuring it is fully seated. Secure the card with the retaining clip or screw.
  4. Connect the 8-pin CPU power cable (EPS12V) from your power supply to the power connector on the Tesla P40. Ensure a secure connection.
NVIDIA Tesla P40 GPU, top view showing the power connector and NVIDIA branding.

Şekil 2: Üst view of the NVIDIA Tesla P40, illustrating the location of the 8-pin power connector.

3.3 Sürücü Kurulumu

  1. After physical installation, close your computer case and reconnect power.
  2. Boot your system.
  3. Download the appropriate NVIDIA drivers for the Tesla P40 from the official NVIDIA website. It is crucial to select drivers compatible with the Pascal architecture. For optimal compatibility, consider using NVIDIA driver version 580 or earlier, as newer versions (e.g., 590 and later) may have dropped support for Pascal devices.
  4. Follow the on-screen instructions to install the drivers. A system reboot may be required.
  5. For Linux systems, if you encounter issues after enabling >4G decoding, you may need to boot into a rescue disk, mount your main OS, chroot into it, and run `mkinitcpio -P` or similar commands to regenerate your kernel image and grub configuration.

4. Kullanım Talimatları

4.1 Yazılım Ortamı Kurulumu

  • CUDA Araç Seti: Install the NVIDIA CUDA Toolkit, which provides the development environment for GPU-accelerated applications. Ensure the CUDA version is compatible with your installed NVIDIA drivers.
  • Derin Öğrenme Çerçeveleri: Configure your preferred deep learning frameworks (e.g., TensorFlow, PyTorch) to utilize the NVIDIA Tesla P40. Refer to the documentation of your chosen framework for specific setup instructions.

4.2 İzleme ve Performans

  • Use NVIDIA's `nvidia-smi` utility (available after driver installation) to monitor GPU utilization, memory usage, temperature, and power consumption.
  • Ensure GPU temperatures remain within safe operating limits, typically below 90°C under load. Due to passive cooling, maintaining adequate system airflow is critical for thermal management.

5. Bakım

  • Toz Giderimi: Periodically inspect your server chassis and the GPU for dust accumulation. Dust can impede airflow and reduce cooling efficiency. Use compressed air to gently clean the heatsink fins and surrounding areas.
  • Çevre Kontrolü: Operate the system in a clean, temperature-controlled environment to prevent overheating and prolong component lifespan.
  • Sürücü Güncellemeleri: While keeping drivers updated is generally recommended, exercise caution with Tesla P40. Refer to NVIDIA's official support channels for recommended driver versions to avoid compatibility issues with older Pascal architecture.

6. Sorun Giderme

  • System Not Recognizing GPU:
    • Verify the GPU is fully seated in the PCIe slot.
    • Ensure the 8-pin CPU power cable is securely connected.
    • Check BIOS settings for "Above 4G decoding" and ensure it is enabled.
    • Reinstall or update NVIDIA drivers.
  • Aşırı Isınma Sorunları:
    • Confirm adequate airflow within the server chassis. Ensure all system fans are functioning correctly and are configured to provide sufficient cooling for passive components.
    • Clean any dust accumulation from the GPU heatsink and server vents.
    • Mümkünse ortam sıcaklığını azaltın.
  • Güç Kablosu Sorunları: Some users have reported issues with included power cables. Ensure you are using a high-quality 8-pin EPS12V CPU power cable that can safely deliver the required wattage. If issues persist, consider replacing the cable with a verified compatible one.
  • Performans Düşüşü:
    • Check GPU utilization and temperature using `nvidia-smi`. Thermal throttling can reduce performance.
    • Ensure your software environment (CUDA, deep learning frameworks) is correctly configured and optimized for the Tesla P40.

If troubleshooting steps do not resolve the issue, please contact NVIDIA support for further assistance.

7. Özellikler

Close-up of the NVIDIA Tesla P40 label showing model number 900-2G610-0000-000 and other regulatory information.

Figure 3: Product label displaying the model number and other identification details.

ÖzellikDetay
Model Numarası900-2G610-0000-000
GPU MimarisiNvidia paskal
Grafik Eş İşlemcisiNVIDIA Tesla P40
Tek Hassasiyetli Performans12 TeraFLOPS
Integer Operations (INT8)47 TOPS (Tera-Operations per Second)
GPU Belleği24 GB GDDR5
Bellek Bant Genişliği346 GB/s
Sistem ArayüzüPCI Express 3.0 x16
Maksimum Güç Tüketimi250W
ECC ProtectionEvet
Hardware-Accelerated Video Engine1x Decode Engine, 2x Encode Engine
Paket Boyutları17.05 x 8.66 x 3.19 inç
Ürün Ağırlığı3.14 pound
İlk Mevcut Tarih7 Temmuz 2017

8. Garanti ve Destek

For information regarding product warranty, technical support, and service, please refer to the official NVIDIA website or contact your point of purchase. NVIDIA provides comprehensive resources and support for its products.

İlgili Belgeler - 900-2G610-0000-000

Önview NVIDIA AI Enterprise Kullanıcı Kılavuzu: Kurulum, Yapılandırma ve Yönetim
NVIDIA AI Enterprise için kapsamlı kullanıcı kılavuzu, NVIDIA vGPU, AI çerçeveleri ve çeşitli hipervizörler ve işletim sistemlerindeki yazılım bileşenlerinin kurulumunu, yapılandırmasını ve yönetimini ayrıntılı olarak açıklamaktadır.
Önview NVIDIA TensorRT Support Matrix v4.0.1 - Platform and Layer Compatibility
Comprehensive support matrix for NVIDIA TensorRT version 4.0.1, detailing compatibility across platforms (Linux, Android, QNX) and software versions (CUDA, cuDNN), along with a detailed breakdown of supported features for each TensorRT layer.
Önview NVIDIA Jetson Xavier NX Series Product Marking Specification
This document specifies the product markings for the NVIDIA Jetson Xavier NX series modules, including details on part numbers, serial numbers, barcodes, and country of origin.
Önview CUDA on WSL User Guide - NVIDIA
NVIDIA's comprehensive guide to setting up and using CUDA with the Windows Subsystem for Linux (WSL) for GPU-accelerated computing, AI, and machine learning development.
Önview NVIDIA Veri Merkezi GPU Yöneticisi Kullanım Kılavuzu
Bu kullanıcı kılavuzu, küme ve veri merkezi ortamlarında NVIDIA Tesla GPU'larının yönetimini, izlenmesini ve idaresini basitleştirmek için tasarlanmış bir araç olan NVIDIA Veri Merkezi GPU Yöneticisi (DCGM) hakkında kapsamlı bilgi sağlar. Kurulum, yapılandırma ve özellikler hakkında genel bilgiler içerir.viewPrometheus ve Grafana gibi izleme araçlarıyla entegrasyon ve teşhis yetenekleri.
Önview NVIDIA Toplu İletişim Kütüphanesi (NCCL) Kurulum Kılavuzu
Comprehensive guide for installing and using the NVIDIA Collective Communication Library (NCCL), a high-performance multi-GPU communication primitive library for deep learning and parallel computing.