Lascar Electronics EL-21CFR-TP-LCD EasyLog 21CFR FDA Uyumlu Sıcaklık Veri Kaydedici ve Prob Kullanım Kılavuzu

1. Giriş

The Lascar Electronics EL-21CFR-TP-LCD EasyLog 21CFR FDA-Compatible Temperature Data Logger with Probe is a standalone device designed for accurate temperature monitoring. This data logger is compliant with 21CFR regulations and is capable of recording and displaying over 32,000 temperature readings from its high-accuracy thermistor probe. It features an integrated LCD screen and a push-button interface, allowing users to easily view the most recent, highest, and lowest recorded temperature values.

2. Güvenlik Bilgileri

Please read all instructions carefully before operating the device. Failure to do so may result in inaccurate readings or damage to the unit.

• Do not expose the data logger to extreme temperatures outside its specified operating range (-35 to +80°C / -31 to +176°F).
• Avoid exposing the device to excessive moisture or corrosive substances.
• Handle the thermistor probe with care to prevent damage.
• Ensure proper ventilation if used in an enclosed space.
• Cihazı sökmeye veya üzerinde değişiklik yapmaya çalışmayın. Tüm servis işlemlerini yetkili personele yaptırın.
• Cihazı ve bileşenlerini yerel çevre yönetmeliklerine uygun olarak imha edin.

3. Ürün Bittiview

The EL-21CFR-TP-LCD data logger is a compact and robust device designed for reliable temperature monitoring.

Figure 1: Lascar Electronics EL-21CFR-TP-LCD Data Logger. The image shows the black data logger unit with an LCD display showing "12.0°C", a button, and a USB connector at one end. A clear protective cap is shown detached from the USB end.

Temel Bileşenler:

• LCD Ekran: Shows current temperature, highest, lowest, and other status indicators.
• Butona basınız: Used to cycle through display modes and initiate logging (if configured).
• USB bağlantısı: For connecting to a computer to configure the logger and download data.
• Thermistor Probe Input: Port for connecting the external thermistor probe.
• Koruyucu Başlık: Kullanılmadığı zaman USB konektörünü kapatır.

4. Kurulum

4.1 Yazılım Kurulumu

Before using the data logger, you must install the EasyLog 21CFR software on your computer. This software is required for configuring the logger, downloading data, and viewgrafikler.

1. Obtain the EasyLog 21CFR software from the manufacturer's official websiteye veya sağlanan kurulum ortamına bakın.
2. Yazılım kurulumunu tamamlamak için ekrandaki talimatları izleyin.
3. Ensure your computer meets the minimum system requirements for the software.

4.2 İlk Yapılandırma

Once the software is installed, connect the data logger to your computer via the USB port.

1. Remove the protective cap from the USB connector of the data logger.
2. Plug the data logger into an available USB port on your computer.
3. Launch the EasyLog 21CFR software. The software should detect the connected data logger.
4. Within the software, configure the desired logging parameters, including:
   • Logging rate (e.g., every 10 minutes, every hour)
   • Start mode (e.g., immediate, delayed start, push-button start)
   • Alarm thresholds (high and low temperature limits)
   • Units of measurement (°C or °F)
5. Apply the settings to the data logger. The logger is now ready for deployment.

4.3 Prob Bağlantısı

Connect the thermistor probe to the designated input port on the data logger. Ensure a secure connection for accurate readings.

5. Operasyon

5.1 Veri Kaydına Başlama

The method for starting data logging depends on the configuration set in the software:

• Hemen Başlat: Logging begins as soon as the settings are applied from the software.
• Rötar: Logging begins after a pre-set time delay.
• Basma Düğmesiyle Başlatma: Press and hold the push-button on the data logger for approximately 3 seconds until the 'REC' indicator appears on the LCD.

5.2 Viewing Readings on LCD

Press the push-button briefly to cycle through the displayed information on the LCD:

• Mevcut Sıcaklık: The real-time temperature reading from the probe.
• Highest Recorded Temperature: The maximum temperature recorded during the current logging session.
• Lowest Recorded Temperature: The minimum temperature recorded during the current logging session.
• Logging Status: Indicators such as 'REC' (recording), 'STOP' (stopped), 'FULL' (memory full).

5.3 Veri Kaydını Durdurma

Logging can be stopped in several ways, depending on the configuration:

• Memory Full: Logging automatically stops when the device's memory capacity (32,000 readings) is reached.
• Push-Button Stop: If configured, press and hold the push-button for approximately 3 seconds until the 'STOP' indicator appears.
• Yazılım aracılığıyla: Connect the logger to a computer and use the EasyLog 21CFR software to stop the logging session.

5.4 Veri İndirme

To retrieve recorded data:

1. Connect the data logger to your computer via USB.
2. Open the EasyLog 21CFR software.
3. The software will automatically detect the logger and prompt you to download the data.
4. Follow the software instructions to save the data, which can then be viewed, analyzed, and exported in various formats.

6. Bakım

6.1 Temizlik

Clean the exterior of the data logger with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the USB port and probe input are free from dust and debris.

6.2 Pil Değişimi

The data logger contains an internal battery. If the battery indicator on the LCD or software shows low power, the battery may need replacement. Refer to the EasyLog 21CFR software documentation or contact customer support for battery replacement procedures, as this may require specialized tools or service.

6.3 Kalibrasyon

For applications requiring high accuracy and compliance, periodic calibration of the data logger and its probe is recommended. Consult the manufacturer's guidelines or a certified calibration service for details.

7. Sorun Giderme

8. Özellikler

9. Garanti ve Destek

Specific warranty information for the Lascar Electronics EL-21CFR-TP-LCD data logger is typically provided with the product packaging or available on the manufacturer's official website. Please refer to these resources for detailed terms and conditions regarding warranty coverage.

Müşteri Desteği:

For technical assistance, troubleshooting beyond this manual, or inquiries regarding service and calibration, please contact Lascar Electronics customer support. Contact details can usually be found on their official websitesinde veya ürün belgelerinde.