Kılavuzlar+

Hobart 84186-2

Hobart 84186-2 Food Cutter Instruction Manual

1. Önemli Güvenlik Bilgileri

Read all instructions thoroughly before operating the Hobart 84186-2 Food Cutter. Failure to follow these instructions may result in serious injury or damage to the equipment. Keep this manual for future reference.

2. Kurulum ve Kurulum

Carefully unpack the Hobart 84186-2 Food Cutter and inspect for any shipping damage. Report any damage immediately to the carrier and your supplier.

2.1 Yerleştirme

Place the food cutter on a sturdy, level countertop or table capable of supporting its weight (approximately 195 pounds). Ensure adequate clearance around the unit for ventilation and safe operation. The unit is equipped with 3-inch legs for stability.

2.2 Elektrik Bağlantısı

The Hobart 84186-2 Food Cutter requires a 115/60/1 electrical supply. It is equipped with a 6-foot cord and plug. Connect the unit to a properly grounded electrical outlet. Do not use extension cords or adapters.

Hobart 84186-2 Food Cutter with stainless steel bowl and knives

Figure 1: The Hobart 84186-2 Food Cutter, showcasing its one-piece burnished aluminum housing, 18-inch stainless steel bowl, and double stainless steel knives.

3. Kullanım Talimatları

Follow these steps for safe and efficient operation of your food cutter.

  1. Hazırlık: Ensure the unit is clean and properly assembled. Verify the 18-inch diameter stainless steel bowl is securely in place.
  2. Yiyecek Yükleme: Place the food items to be processed into the stainless steel bowl. Do not overfill the bowl; ensure the bowl cover can be securely closed.
  3. Secure Bowl Cover: Carefully lower and secure the bowl cover. The unit features a safety interlock that prevents operation if the cover is not correctly seated.
  4. Güç Açık: Locate the push/pull on/off switch. To start the unit, pull the switch outwards. The double stainless steel knives will begin rotating at 1725 RPM, and the bowl will rotate at 20 RPM.
  5. İşleme: Allow the food cutter to process the ingredients until the desired consistency is achieved. Monitor the process through the bowl cover.
  6. Kapat: To stop the unit, push the on/off switch inwards. Wait for all moving parts to come to a complete stop before attempting to remove the bowl cover or food.
  7. Unloading Food: Once the unit is completely stopped, remove the bowl cover and carefully extract the processed food.

4. Bakım ve Temizlik

Regular cleaning and maintenance are crucial for the longevity and hygienic operation of your Hobart 84186-2 Food Cutter.

Ürün Bakım Talimatları: Hand Wash all removable parts. Do not use a dishwasher.

5. Sorun Giderme

This section addresses common issues you might encounter with your food cutter.

SorunOlası NedenÇözüm
Ünite başlamıyorNot plugged in; power switch off; bowl cover not secured; circuit breaker tripped.Check power cord connection; ensure push/pull switch is pulled out; verify bowl cover is correctly seated; check building's circuit breaker.
Food not processing efficientlyOverloaded bowl; dull knives; incorrect food consistency for processing.Reduce batch size; inspect knives for sharpness (contact service if dull); pre-cut larger items if necessary.
Aşırı gürültü veya titreşimUnstable surface; loose components; motor issue.Ensure unit is on a stable, level surface; check for loose parts (after unplugging); if problem persists, contact authorized service.

6. Özellikler

7. Garanti ve Destek

Hobart products are manufactured to high standards and are backed by a limited warranty. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Hobart webalan.

For technical assistance, parts, or service inquiries, please contact Hobart Customer Support. Have your model number (84186-2) and serial number ready when contacting support to expedite service.