Orbit PC-1F

Orbit PC-1F Fotoelektrik Hücre 500W Kablolu Kullanım Kılavuzu

Modeli: PC-1F | Marka: Yörünge

giriiş

This manual provides detailed instructions for the installation, operation, and maintenance of your Orbit PC-1F Photo Cell 500W Wire In. This device is designed to automatically control lighting fixtures based on ambient light levels, providing convenience and energy efficiency.

Orbit PC-1F Photo Cell with wiring

Image: The Orbit PC-1F Photo Cell, a compact black unit with a light sensor lens and three electrical wires (red, white, black) extending from its base.

Güvenlik Bilgileri

Lütfen bu ürünü kurmadan veya çalıştırmadan önce tüm güvenlik talimatlarını okuyun ve anlayın. Bu talimatlara uyulmaması elektrik çarpmasına, yangına veya diğer tehlikelere yol açabilir.

  • Elektrik Tehlikesi: Kurulum yalnızca yetkili bir elektrikçi tarafından veya yerel elektrik yönetmeliklerine uygun olarak yapılmalıdır.
  • Gücü Kesin: Always disconnect power at the circuit breaker or fuse box before installing or servicing the photo cell.
  • Cilttage: Ses seviyesini garantileyintage supply matches the requirements of the photo cell and connected fixtures.
  • Netage: Maksimum su miktarını aşmayıntage rating of 500W for connected lighting.
  • Açık Hava Kullanımı: This device is designed for outdoor use. Ensure all connections are properly sealed and protected from moisture.

Kurulum ve Yükleme

Proper installation is crucial for the optimal performance of the PC-1F Photo Cell.

  1. Konum seç: Select a mounting location where the photo cell's sensor will be exposed to natural daylight and not obstructed by eaves, trees, or other structures. Avoid locations where artificial light sources (e.g., streetlights, porch lights) might shine directly onto the sensor, as this can cause erratic operation.
  2. Gücü Kesin: Turn off the power to the circuit at the main electrical panel before beginning installation.
  3. Kablo Bağlantıları:
    • Bağlan Siyah tel from the photo cell to the incoming 120V AC Line (hot) wire.
    • Bağlan beyaz tel from the photo cell to the Neutral wire of the power supply and to the Neutral wire of the lighting fixture.
    • Bağlan kırmızı tel from the photo cell to the Load (hot) wire of the lighting fixture.

    Ensure all wire connections are secure and insulated with appropriate wire connectors.

  4. Montaj: Securely mount the photo cell using appropriate hardware. Ensure the sensor lens faces the direction of natural light.
  5. Gücü Geri Yükle: Once all connections are made and secured, restore power at the circuit breaker.

Kullanım Talimatları

The Orbit PC-1F Photo Cell operates automatically once installed and powered.

  • Otomatik çalışma: The photo cell is designed to detect ambient light levels. When natural light diminishes below a certain threshold (e.g., at dusk), the photo cell will automatically activate the connected lighting fixtures.
  • Daylight Deactivation: Conversely, when sufficient natural light returns (e.g., at dawn), the photo cell will automatically deactivate the connected lighting fixtures.
  • Zaman Gecikmesi: The photo cell typically incorporates a short time delay to prevent false triggering from transient light changes (e.g., car headlights, lightning flashes).

Bakım

Minimal maintenance is required for the PC-1F Photo Cell to ensure continued reliable operation.

  • Sensör Temizleme: Periodically inspect the photo cell's sensor lens for dirt, dust, or debris. Gently clean the lens with a soft, damp cloth if necessary. Do not use abrasive cleaners.
  • Bağlantı Kontrolü: Annually, or if issues arise, inspect the wiring connections to ensure they remain secure and free from corrosion. Ensure power is disconnected before performing any inspection.
  • Engel Kontrolü: Ensure no new obstructions (e.g., growing foliage, new structures) are blocking natural light from reaching the sensor.

Sorun giderme

SorunOlası NedenÇözüm
Lights stay on during the day.
  • Sensör tıkanmış veya kirli.
  • Artificial light source shining on sensor.
  • Kablolama hatası.
  • Clean sensor lens; remove obstructions.
  • Relocate photo cell or shield sensor from artificial light.
  • Verify wiring connections (refer to Setup section).
Geceleyin ışıklar yanmıyor.
  • No power to the photo cell.
  • Hatalı kablo bağlantısı.
  • Photo cell failure.
  • Connected light fixture issue.
  • Devre kesiciyi ve güç kaynağını kontrol edin.
  • Tüm kablo bağlantılarını kontrol edin ve sağlamlaştırın.
  • Replace photo cell if other solutions fail.
  • Test connected light fixture independently.
Lights flicker or cycle rapidly.
  • Sensor exposed to intermittent light.
  • Gevşek kablo bağlantısı.
  • Relocate photo cell or shield sensor from intermittent light sources.
  • Tüm kablo bağlantılarını kontrol edin ve sabitleyin.

Özellikler

  • Modeli: PC-1F
  • Marka: Yörünge
  • Güç Derecesi: 500W (Maksimum)
  • Giriş Voltage: Standard 120V AC (typical for residential/commercial lighting)
  • İşlem: Automatic Dusk-to-Dawn
  • Kablolama: Wire-in type (Black: Line, White: Neutral, Red: Load)
  • Üretici: Yörünge Endüstrileri
  • ASIN: B072B8D69Q
  • İlk Mevcut Tarih: 20 Mart 2017

Garanti ve Destek

Specific warranty details are not provided in this document. For warranty information, technical support, or replacement parts, please contact Orbit Industries directly or refer to their official webalan.

When contacting support, please have your product model number (PC-1F) and purchase date available.

İlgili Belgeler - PC-1F

Önview Orbit Otomatik Dönüştürücü Kurulum ve Sorun Giderme Kılavuzu (57029, 57030 Modelleri)
Sulama sistemleri için Orbit Otomatik Dönüştürücünün (57029, 57030 modelleri) kurulumu ve sorun giderme işlemlerine dair kapsamlı kılavuz. Manuel vanaları otomatik vanalara dönüştürmeyi, dönüştürücüyü bağlamayı ve sık karşılaşılan sorunları çözmeyi öğrenin.
Önview Orbit WaterMaster 3 Vanalı Önceden Montajlı Dağıtım Manifoldu (Kolay Kablolama Özelliğiyle) - Kurulum ve Kullanım Kılavuzu
Orbit WaterMaster 3 Vanalı Önceden Montajlı Sulama Sistemi Manifoldu için kapsamlı kullanım kılavuzu ve kurulum rehberi. Sulama sisteminiz için vana yerleşimi, kurulum, kablolama, test ve sorun giderme hakkında bilgi edinin.
Önview Orbit 27752-24 Otomatik Sulama Sistemi Kullanım Kılavuzu
Bu kılavuz, Orbit 27752-24 Otomatik Sulama Sistemi için kurulum, programlama, manuel sulama ve sorun giderme konularını kapsayan talimatlar içermektedir.
Önview Orbit 2 Çıkışlı Gelişmiş Hortum Musluğu Zamanlayıcısı Kullanım Kılavuzu ve Programlama Rehberi
Orbit 2 Çıkışlı Gelişmiş Hortum Musluk Zamanlayıcısı için kapsamlı kılavuz; kurulum, sulama programlarının ayarlanması, manuel çalıştırma, yağmur geciktirme özellikleri, sorun giderme ipuçları ve önemli güvenlik uyarıları hakkında ayrıntılı bilgi içerir.
Önview Orbit Otomatik Bahçe Sulama Sistemi Kullanım Kılavuzu
Orbit Otomatik Bahçe Sulama Sistemi (Model 27752) kurulumu, programlanması ve sorun giderme dahil olmak üzere kapsamlı talimatlar.
Önview Orbit Otomatik Bahçe Sulama Sistemi Kullanım Kılavuzu
Instruction manual for the Orbit Model 27752 Automatic Yard Watering System, covering installation, programming, and troubleshooting for up to 4 stations.