Centralite 3-Series Micro Motion Sensor User Manual

1. Giriş

The Centralite 3-Series Micro Motion Sensor is designed to enhance home automation and security systems. This device detects movement within a specified area, enabling various smart home functionalities such as triggering lighting scenes, adjusting HVAC settings, and activating security alarms. Its compact design allows for discreet placement in various locations throughout your home.

Figure 1: Centralite 3-Series Micro Motion Sensor with its packaging.

2. Ürün Bittiview

2.1. Temel Özellikler

• Kompakt Boyut: Measures approximately 1.75"W x 1.75"H x 1.12"D for discreet placement.
• 30-Foot IR Range: Detects motion effectively across rooms and down hallways.
• Dahili Sıcaklık Sensörü: Provides ambient temperature readings, enabling temperature-based automation.
• Kolay Montaj: Includes adhesive mounting tape for simple installation.
• Uzun Pil Ömrü: Up to 2-year battery life with the included CR2450 Lithium Metal battery.

2.2. Dahil Edilen Bileşenler

• Centralite 3-Series Micro Motion Sensor
• CR2450 Pil (önceden takılı)
• Yapışkanlı Montaj Bandı
• Hızlı Başlangıç ​​Kılavuzu

Figure 2: Physical dimensions and key features of the Micro Motion Sensor.

3. Kurulum ve Kurulum

3.1. Pil Kurulumu

The CR2450 Lithium Metal battery is pre-installed in the sensor. Before first use, ensure any protective pull-tabs are removed from the battery compartment to activate the sensor.

3.2. Pairing with a Smart Home Hub

The Centralite Micro Motion Sensor is Zigbee HA 1.2 certified and compatible with various Zigbee HA 1.2-certified hubs, including Ezlo, SmartThings, Wink, and Vera. Follow these general steps to pair your sensor:

1. Place your smart home hub into pairing mode. Refer to your hub's specific instructions for this process.
2. Activate the sensor's pairing mode. This typically involves pressing a button on the sensor until an indicator light flashes. Consult the Quick Start Guide for exact button location and indicator behavior.
3. Once paired, the hub will confirm the connection, and the sensor's indicator light will change (e.g., solid green).
4. Configure the sensor within your hub's application to define its function and integrate it into your smart home routines.

Figure 3: The sensor is compatible with multiple Zigbee HA 1.2 certified hubs.

3.3. Sensörün Montajı

The sensor is designed for wall mounting. Use the included adhesive mounting tape to secure the sensor in your desired location. Ensure the mounting surface is clean and dry for optimal adhesion. Position the sensor to cover the area where motion detection is required, keeping in mind its 30-foot IR range.

4. Operasyon

4.1. Hareket Algılama

The sensor continuously monitors its detection area for movement. Upon detecting motion, it sends a signal to your connected smart home hub. This signal can be used to trigger various automated actions.

4.2. Akıllı Ev Entegrasyonu

Once integrated with your smart home hub, the motion sensor can be configured for multiple applications:

• Güvenlik Uyarıları: Receive text or email notifications when unexpected motion is detected.
• Otomatik Aydınlatma: Automatically turn lights on or off based on presence, such as illuminating a hallway at night or turning on living room lights upon entry.
• Enerji Tasarrufu: Trigger actions to turn off lights, adjust thermostats, or disable devices when no motion is detected for a set period.
• Sıcaklık İzleme: Utilize the built-in temperature sensor to monitor room temperature and create automation rules based on temperature changes.

Figure 4: The sensor can be used in various areas like living rooms, basements, foyers, and garages.

Şekil 5: Eski sevgiliample of a notification received when motion is detected.

5. Bakım

5.1. Pil Değişimi

The sensor uses one CR2450 Lithium Metal battery. When the battery level is low, your smart home hub may send a notification. To replace the battery:

1. Carefully open the sensor casing.
2. Eski CR2450 pili çıkarın.
3. Kutupların doğru olduğundan emin olarak yeni bir CR2450 pil takın.
4. Sensörü kapatın casing güvenli bir şekilde.
5. The sensor should automatically reconnect to your hub. If not, you may need to re-pair it following the instructions in Section 3.2.

5.2. Temizlik

Clean the sensor with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials, as these can damage the device.

6. Sorun Giderme

• Sensor Not Connecting/Frequent Disconnections:
  Ensure the sensor is within range of your Zigbee hub. Check the battery level and replace if necessary. Try re-pairing the sensor with your hub. Verify that your hub's firmware is up to date.
• Motion Not Detected:
  Check for obstructions in the sensor's field of view. Ensure the sensor is mounted at an appropriate height and angle. Verify the battery is not depleted. Test the sensor's functionality by manually triggering motion.
• Hatalı Sıcaklık Ölçümleri:
  Ensure the sensor is not placed near heat sources or vents that could affect its readings. Allow time for the sensor to acclimate to its environment.
• Uyarı Alınmadı:
  Confirm that notification settings are correctly configured within your smart home hub's application. Check your phone's notification settings for the hub's app.

7. Özellikler

8. Garanti ve Destek

8.1. Garanti Bilgileri

Centralite by Ezlo offers the Ezlo Smart Home for Life Guarantee with the purchase of their products. This includes guaranteed compatibility and an industry-leading warranty. For specific terms and conditions of your warranty, please refer to the documentation included with your product or visit the official Centralite by Ezlo webalan.

8.2. Müşteri Desteği

For technical assistance, troubleshooting, or any questions regarding your Centralite 3-Series Micro Motion Sensor, please contact Centralite customer support. Contact details can typically be found on the product packaging or the official Centralite by Ezlo support webalan.