TC Electronic Flashback 2 delay

TC Electronic FLASHBACK 2 DELAY User Manual

Model: Flashback 2 Delay

giriiş

The TC Electronic FLASHBACK 2 DELAY is a versatile delay effects pedal designed for guitarists seeking a wide range of delay sounds and innovative control. This manual provides essential information for setting up, operating, and maintaining your device.

TC Electronic Flashback 2 Delay Pedal

Resim: Ön view of the TC Electronic Flashback 2 Delay pedal, showcasing onun mavisi casing and control knobs.

Temel Özellikler

  • Advanced delay effects pedal with a comprehensive suite of delay types.
  • Integrated MASH footswitch for expressive real-time control over various parameters.
  • Built-in TonePrint technology for custom effect settings and artist presets.
  • Stereo input and output for flexible signal routing.
  • Compact and durable design suitable for pedalboards.

Kurmak

Güç Bağlantısı

Connect a 9V DC power supply (not included) to the DC IN jack on the rear of the pedal. Ensure the power supply meets the specified voltage and current requirements (9V DC, 100mA, center negative).

Ses Bağlantıları

Connect your instrument to the INPUT (MONO) jack. For stereo operation, connect a second cable to the INPUT B jack. Connect the OUTPUT (MONO) jack to your amplifier or next pedal in the signal chain. For stereo output, connect a second cable from OUTPUT B.

Arka view of Flashback 2 Delay pedal showing input/output jacks and power input

Resim: Arka view of the Flashback 2 Delay pedal, illustrating the input and output jacks, along with the power input.

Kullanım Talimatları

Temel İşlemler

To activate the pedal, press the MASH footswitch. The LED will illuminate to indicate the effect is active. Press the footswitch again to bypass the effect.

Kontroller Üzerindeview

Geciktirme düğmesi

Gecikme Düğmesi:

Controls the delay time, from short slap-back echoes to long, atmospheric repeats.

Geri bildirim düğmesi

GERİ BİLDİRİM Düğmesi:

Adjusts the number of repeats. Higher settings create more echoes, potentially leading to self-oscillation.

Seviye düğmesi

SEVİYE Düğmesi:

Controls the overall volume of the delayed signal.

Type selector knob

TYPE Selector:

Selects between various delay algorithms including 2290, Analog, Tape, Dynamic, Modulated, Crystal, Reverse, and Looper modes.

MASH Footswitch

The MASH footswitch is pressure-sensitive, allowing you to control various effect parameters in real-time by pressing harder on the switch. The specific parameter controlled by MASH can be customized via the TonePrint app.

Close-up of the MASH footswitch on the Flashback 2 Delay pedal

Resim: Ayrıntılı view of the MASH footswitch, highlighting its pressure-sensitive design.

TonePrint Teknolojisi

TonePrint allows you to load custom presets created by TC Electronic artists or design your own unique delay sounds. Connect the pedal to your computer via USB or use the TonePrint app on your smartphone to beam presets wirelessly to the pedal's pickup.

The pedal features three dedicated TonePrint slots (1, 2, 3) accessible via the TYPE selector, allowing you to quickly switch between your favorite custom sounds.

Bakım

  • Pedalı temiz tutun ve tozdan ve kirden arındırın. Temizlik için yumuşak, kuru bir bez kullanın.
  • Pedalları aşırı sıcaklıklara, neme veya doğrudan güneş ışığına maruz bırakmaktan kaçının.
  • Do not attempt to open the pedal enclosure or perform unauthorized repairs, as this may void your warranty.
  • Always use a compatible 9V DC power supply to prevent damage.

Sorun giderme

If you experience issues with your pedal, consider the following common troubleshooting steps:

  • Ses Yok: Tüm kablo bağlantılarını kontrol edin (cihaz, amplifier, power supply). Ensure the pedal is receiving power and the effect is engaged.
  • Zayıf veya Bozuk Ses: Verify that the LEVEL knob is set appropriately. Check your instrument's output and amplifier's input levels.
  • Beklenmeyen Davranış: Ensure the correct delay type is selected. If using TonePrint, verify the preset is loaded correctly. Try resetting the pedal by disconnecting and reconnecting power.

Özellikler

ÖzellikDetay
Ürün Ağırlığı0.33 Kilogram (11.6 ons)
Ürün Boyutları7.4"U x 5"G x 12.2"Y (12.2 x 7.4 x 5 inç)
MarkaTC Elektronik
Model NumarasıFlashback 2 delay
Güç KaynağıBattery Powered (9V DC, 100mA, center negative recommended)
Sinyal BiçimiAnalog
Bağlayıcı TürüUSB 2.0 Tip B
RenkMavi

Kutuda Neler Var?

  • TC Electronic Flashback 2 Delay Pedal

Note: Power supply and audio cables are typically sold separately.

Garanti ve Destek

For warranty information and technical support, please refer to the official TC Electronic webSite üzerinden satın alabilir veya doğrudan müşteri hizmetleriyle iletişime geçebilirsiniz. Satın alma belgenizi garanti talepleriniz için saklayın.

You can visit the official TC Electronic store for more information: TC Electronic Store