Einhell TC-SY 600 S Elektrikli Boya Püskürtme Sistemi Kullanım Kılavuzu

giriiş

The Einhell TC-SY 600 S electric paint spraying system is designed for efficient application of varnish, glaze, and indoor wall paints on medium to large work surfaces. This semi-stationary system offers flexibility and ease of use for various painting tasks. Its design prioritizes user comfort and straightforward cleaning, making it suitable for both novice and experienced users.

Please read this manual thoroughly before operating the device to ensure safe and effective use.

Güvenlik Talimatları

Always observe general safety precautions when operating power tools. Wear appropriate personal protective equipment, including eye protection, gloves, and a respirator, especially when spraying paints. Ensure adequate ventilation in the work area. Keep children and pets away from the operating device. Disconnect the power supply before performing any cleaning or maintenance.

Ürün Bittiview ve Bileşenler

The Einhell TC-SY 600 S system consists of a main unit with a motor, a spray gun, a flexible air hose, and various accessories to facilitate painting and maintenance.

Figure 1: Einhell TC-SY 600 S Electric Paint Spraying System, showing the main motor unit and the detached spray gun with paint container.

Dahil Bileşenler:

• Ana Motor Ünitesi
• Spray Gun with 800 ml Paint Container and Lid
• 1.8 m Air Hose
• Two Nozzles for different paint viscosities
• Viscosity Test Container
• Cleaning Brush for riser pipe
• Cleaning Needle for spray nozzle
• Kullanım Kılavuzu (bu kılavuz)

Figure 2: Included accessories, featuring cleaning tools, two different nozzles, a viscosity cup, and a container lid.

Kurmak

1. Çalışma Alanını Hazırlayın: Ensure the area is clean, well-ventilated, and protected from overspray. Cover any surfaces not intended for painting.
2. Boyayı Hazırlayın:
   • Boyayı iyice karıştırın.
   • Use the provided viscosity test container to check the paint's consistency. Fill the container with paint and time how long it takes for the paint to flow out completely. Refer to your paint manufacturer's recommendations for ideal viscosity.
   • If the paint is too thick, dilute it with the appropriate thinner (water for water-based paints, mineral spirits for oil-based paints) until the desired viscosity is achieved.
3. Boya Kabını Doldurun: Unscrew the paint container from the spray gun. Pour the prepared paint into the 800 ml container. Securely reattach the container to the spray gun.
4. Meme ucunu seçin ve takın: Choose the appropriate nozzle based on the paint type and desired spray pattern. Attach it securely to the spray gun.
5. Hava Hortumunu Bağlayın: Connect one end of the 1.8 m air hose to the spray gun and the other end to the main motor unit. Ensure connections are firm.
6. Güç Bağlantısı: Plug the main motor unit into a suitable power outlet.

Kullanım Talimatları

1. Güç Açık: Switch on the main motor unit. The motor will start, and air will flow through the hose to the spray gun.
2. Püskürtme Desenini Ayarlayın: The spray nozzle can be adjusted to produce three different patterns:
   • Vertical Fan: Yatay yüzeyler için.
   • Horizontal Fan: Dikey yüzeyler için.
   • Circular Jet: For small areas or corners.
   Rotate the air cap on the spray gun to select the desired pattern.


Figure 3: Illustration of adjustable spray patterns: horizontal fan, vertical fan, and circular jet.

3. Adjust Paint Quantity: Use the integrated paint quantity control dial on the spray gun to regulate the amount of paint being sprayed. Start with a lower setting and increase as needed.
4. Test Spreyi: Before painting your actual project, perform a test spray on a piece of scrap material to check the spray pattern and paint flow. Adjust settings until satisfied.
5. Püskürtme Tekniği:
   • Hold the spray gun at a consistent distance (typically 6-10 inches) from the surface.
   • Move the spray gun in smooth, even strokes, overlapping each pass slightly.
   • Release the trigger at the end of each stroke to avoid paint buildup.
   • Apply multiple thin coats rather than one thick coat to prevent drips and ensure even coverage.
6. Kapat: Once painting is complete, switch off the main motor unit.

Bakım

Proper cleaning after each use is essential for the longevity and optimal performance of your paint spraying system.

Şekil 4: Patlatılmış view of the spray gun components, illustrating parts that can be disassembled for thorough cleaning.

1. Empty Paint Container: Disconnect the power. Unscrew the paint container and pour any remaining paint back into its original can or dispose of it properly.
2. İlk Durulama: Fill the empty paint container with the appropriate cleaning solution (water for water-based paints, thinner for oil-based paints). Reattach the container and spray the cleaning solution through the gun until it runs clear. Dispose of the cleaning solution responsibly.
3. Sökün ve Temizleyin:
   • Unscrew and remove the spray head and nozzle.
   • Use the provided cleaning brush to clean the riser pipe and the inside of the paint container.
   • Use the cleaning needle to clear any blockages in the spray nozzle.
   • Thoroughly clean all disassembled parts with the appropriate cleaning solution.
4. Kurulayın ve Tekrar Birleştirin: Allow all components to dry completely before reassembling the spray gun.
5. Depolamak: Store the paint spraying system in a clean, dry place, away from extreme temperatures and out of reach of children.

Sorun giderme

Özellikler

Garanti ve Destek

For warranty information or technical support, please refer to the warranty card included with your product or contact Einhell customer service directly. Keep your purchase receipt as proof of purchase.