Sentry BT900

Sentry BT900 On-Neck Bluetooth Headphones User Manual

giriiş

This manual provides instructions for the Sentry BT900 On-Neck Bluetooth Headphones. It covers setup, operation, maintenance, and troubleshooting to ensure proper use of your wireless audio device.

Paket İçeriği

Ürün paketinizde aşağıdaki öğelerin bulunduğundan emin olun:

Ürün Bittiview

Familiarize yourself with the components of your Sentry BT900 headphones.

Sentry BT900 On-Neck Bluetooth Headphones showing the neckband and earbuds

The image displays the Sentry BT900 headphones, featuring a flexible neckband designed for comfortable wear. The earbuds are connected to the neckband, and control buttons are typically located on one side of the neckband for easy access.

Temel Bileşenler:

Kulaklıkları Şarj Etme

İlk kullanımdan önce kulaklıkları tamamen şarj edin.

  1. Connect the small end of the USB charging cable to the Micro-USB port on the headphones.
  2. USB şarj kablosunun daha büyük ucunu bir USB güç kaynağına (örneğin, bilgisayarın USB portuna, USB duvar adaptörüne) bağlayın.
  3. Şarj esnasında LED göstergesi yanacak ve şarj tamamlandığında renk değiştirecek veya sönecektir.
  4. Tam şarj genellikle yaklaşık 2-3 saat sürer.

Bluetooth Aygıtıyla Eşleştirme

Follow these steps to connect your headphones to a Bluetooth-enabled device:

  1. Ensure the headphones are turned off and fully charged.
  2. Basılı tutun Güç/Çok fonksiyonlu düğme for approximately 5-7 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
  3. Bluetooth özellikli cihazınızda (akıllı telefon, tablet vb.) Bluetooth ayarlarına gidin.
  4. Bluetooth'u etkinleştirin ve mevcut cihazları arayın.
  5. Select 'Sentry BT900' from the list of found devices.
  6. Eşleştirme işlemi tamamlandıktan sonra, kulaklıklardaki LED göstergesi genellikle yavaşça mavi renkte yanıp söner veya sabit mavi renkte yanar.
  7. If a passcode is requested, enter '0000'.

Kulaklıkların Çalıştırılması

Güç Açma/Kapatma:

Müzik Çalma:

Çağrı Yönetimi:

Ses Kontrolü:

Bakım

Temizlik:

Gently wipe the headphones and earbuds with a soft, dry cloth. For ear tips, remove them and clean with a mild soap solution if necessary, then rinse and dry completely before reattaching.

Depolamak:

Kulaklıkları serin, kuru ve doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak bir yerde saklayın. Üzerlerine ağır nesneler koymaktan kaçının.

Pil Bakım:

Pil ömrünü uzatmak için pili sık sık tamamen boşaltmaktan kaçının. Kulaklığınızı, uzun süre kullanmasanız bile düzenli olarak şarj edin.

Sorun giderme

Kulaklıklar açılmıyor:

Ensure the headphones are fully charged. Connect to a power source and attempt to power on after a few minutes.

Cihazla eşleştirilemiyor:

Ensure the headphones are in pairing mode (flashing red and blue LED). Make sure Bluetooth is enabled on your device and it is within range (typically 10 meters). Turn off and on both the headphones and the device, then try pairing again.

Ses yok veya ses seviyesi düşük:

Check the volume levels on both the headphones and your connected device. Ensure the headphones are properly paired and connected. Try re-pairing the headphones.

Kötü ses kalitesi:

Ensure there are no obstructions between the headphones and your device. Move closer to your device. Check for interference from other wireless devices.

Şarj sorunları:

Verify the USB cable is securely connected to both the headphones and the power source. Try a different USB cable or power source.

Özellikler

Garanti ve Destek

For warranty information, please refer to the documentation included with your purchase or contact Sentry customer support.

Garanti talepleri için satın alma belgenizi saklayın.