Reflecta Combo Albüm SCAN 64400 Tarayıcı Kullanım Kılavuzu

1. Giriş

This manual provides essential instructions for the safe and efficient operation of your Reflecta Combo Album SCAN 64400 Scanner. Please read this manual thoroughly before using the device to ensure proper setup, usage, and maintenance. Keep this manual for future reference.

2. Güvenlik Bilgileri

To prevent damage to the device or injury to yourself, observe the following safety precautions:

• Yalnızca Harici Kullanım: This device is designed for scanning photos, film, and slides. Do not attempt to use it for any other purpose.
• Güç Kaynağı: Use only the power adapter supplied with the scanner. Ensure the voltage yerel elektrik kaynağınıza uygundur.
• Havalandırma: Do not block ventilation openings. Ensure adequate airflow around the scanner to prevent overheating.
• Sıvıya Maruz Kalma: Keep the scanner away from water and other liquids. Do not operate the device with wet hands.
• Temizlik: Temizlemeden önce elektriği kesin. Yumuşak, kuru bir bez kullanın. Sıvı veya aerosol temizleyiciler kullanmayın.
• Sökme: Do not attempt to disassemble or repair the scanner yourself. Refer all servicing to qualified service personnel.
• Çocuklar: Cihazı çocukların erişemeyeceği yerde saklayınız.

3. Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

• Reflecta Combo Album SCAN 64400 Scanner Unit
• Güç Adaptörü
• USB kablosu
• Film Holder (for 35mm film strips)
• Slide Holder (for mounted 35mm slides)
• Temizleme Fırçası
• Kullanım Kılavuzu (bu belge)

4. Ürün Bittiview

Familiarize yourself with the components of your scanner.

Şekil 4.1: Ön view of the Reflecta Combo Album SCAN 64400 Scanner, showing the display screen, control buttons, and input slots for photos and film.

Şekil 4.2: The scanner unit displayed with its included film holder and a small cleaning brush, essential accessories for film and slide scanning.

4.1. Tarayıcı Bileşenleri

• Güç Düğmesi: Turns the scanner on/off.
• LCD Ekran: Shows scan preview, menu options, and settings.
• Kontrol Düğmeleri: Navigation (Up/Down/Left/Right), OK/Enter, Type (Photo/Film), Size.
• Photo Input Slot: For scanning physical photos.
• Film Input Slot: For inserting film/slide holders.
• SD Kart Yuvası: For saving scanned images (SD card not included).
• USB Bağlantı Noktası: For connecting to a computer or power adapter.

5. Kurulum

5.1. Güç Bağlantısı

1. Connect the small end of the USB cable to the USB port on the scanner.
2. Connect the large end of the USB cable to the provided power adapter.
3. Güç adaptörünü standart bir elektrik prizine takın.
4. Press the Power button to turn on the scanner.

5.2. Inserting an SD Card (Optional)

The scanner saves images to an SD card. If you wish to save scans, insert an SD card (up to 32GB, Class 10 recommended) into the SD card slot until it clicks into place. Ensure the card is formatted correctly (FAT32).

6. Tarayıcının Çalıştırılması

6.1. Scanning Photos

This scanner is designed to digitize physical photos, including those mounted in albums.

Şekil 6.1: The scanner positioned over an open photo album, demonstrating its capability to scan a photo directly from the album without removal.

1. Tarayıcının açık olduğundan emin olun.
2. Basın TİP button until "PHOTO" mode is selected on the display.
3. Carefully place the scanner over the photo you wish to scan. Ensure the photo is flat and well-lit.
4. Use the navigation buttons to adjust the scanning area if necessary.
5. Basın OK button to initiate the scan. The scanned image will appear on the display.
6. Görüntüyü kaydetmek için tuşuna basın OK button again. The image will be saved to the inserted SD card.
7. You can adjust image settings (e.g., exposure, color balance) using the menu options before scanning. Refer to the on-screen menu for details.

6.2. Scanning Film and Slides

The scanner supports 35mm film strips and mounted slides.

1. Tarayıcının açık olduğundan emin olun.
2. Basın TİP button until "FILM" mode is selected on the display.
3. Open the appropriate film or slide holder.
4. Carefully insert your 35mm film strip or mounted slide into the holder, ensuring it is correctly aligned.
5. Tutucuyu güvenli bir şekilde kapatın.
6. Insert the loaded holder into the Film Input Slot on the side of the scanner.
7. Use the navigation buttons to preview and adjust the image on the display.
8. Basın OK Tarama işlemini başlatmak için düğmeye tıklayın.
9. Görüntüyü kaydetmek için tuşuna basın OK button again. The image will be saved to the inserted SD card.

7. Bakım

7.1. Tarayıcının Temizlenmesi

Regular cleaning ensures optimal scan quality.

• Dış: Wipe the exterior of the scanner with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
• Photo Scanning Area: Gently wipe the glass surface in the photo scanning area with a microfiber cloth. For stubborn smudges, a small amount of lens cleaning solution can be applied to the cloth (not directly to the scanner).
• Film/Slide Input: Use the provided cleaning brush (or a soft, dry brush) to remove dust from the film input slot and film/slide holders. Avoid touching the internal optical components.
• Mercek: If dust is visible on the internal lens, use a can of compressed air (held upright) to gently blow away particles. Do not use excessive force.

Temizleme işlemine başlamadan önce tarayıcının mutlaka kapalı ve fişinin çekilmiş olduğundan emin olun.

8. Sorun Giderme

Yaygın sorunlar ve çözümleri için bu bölüme bakın.

9. Özellikler

Technical specifications for the Reflecta Combo Album SCAN 64400 Scanner.

10. Garanti ve Destek

Reflecta products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Reflecta website. Please have your model number (64400) and purchase details available when contacting support.

Üretici: Yansıtıcı