1. Güvenlik Bilgileri
Önemli Güvenlik Talimatları:
- Protect the unit with appropriate circuit breakers or fuses according to the nameplate.
- Tedarik hacminin sağlanmasıtage (volt), isim plakasında belirtilen değere karşılık gelir.
- Bu ünite topraklanmalıdır. Yalnızca bakır iletkenler kullanın.
- 75°C'ye (167°F) uygun elektrik kabloları kullanın.
- Kurulum, onarım ve temizlik işlemlerinden önce devre kesiciden/sigortadan üniteye giden güç kaynağını kapatın.
- Ensure that the unit is designed for the intended use (consult the product catalog or a representative if necessary).
- Önerilen ısıtma kapasitesi: 1.25 W/ft küp (0.03 m³).
2. Ürün Bittiview
The Stelpro Uniwatt UHC2002WCW is a modern, surface-mounted convector heater designed for quiet operation and efficient heating in various indoor spaces. This model provides 2000 watts of heating capacity at 240V (1500W at 208V) and requires an external wall thermostat for temperature control.
Temel Özellikler:
- Isıtma Kapasitesi: 2000W (240V) / 1500W (208V), suitable for large rooms.
- Kontrol: Requires an external wall thermostat (sold separately).
- Sessiz Çalışma: Minimum gürültü seviyesi için tasarlanmıştır.
- Tasarım: Sleek, modern look with rounded corners and a durable steel cabinet.
- Kurulum: Designed for surface mounting with a concealed bracket.
- Malzeme: 22-gauge steel front and cabinet.
- Özellik: Cool Touch Exterior.
Ürün Bileşenleri:
This image displays the front of the Stelpro Uniwatt UHC2002WCW convector heater, highlighting its clean white finish and the top air outlet grille.
Ayrıntılı view of the heater's durable white finish, which is an epoxy-polyester powdercoat designed for a crisp matte look.
Bu görüntü yan tarafı gösteriyor.file of the convector heater, emphasizing its slim design which allows it to blend discreetly into any room.
An illustration detailing the physical dimensions of the heater, including its width, height, and depth, crucial for planning installation space.
3. Kurulum ve Kurulum
This convector heater is designed for surface mounting and hardwired electric connection. Ensure all safety precautions are followed before beginning installation.
3.1 Determining Heating Requirements:
Before installation, determine the appropriate wattage for your space. The recommended heating capacity is 1.25 W per cubic foot (0.03 m³).
This table provides a guide to determine the required power (in watts) based on the area to be heated (in square feet or square meters), helping users select the correct heater for their space.
3.2 Isıtıcının Montajı:
The heater features a concealed mounting bracket for a clean and professional appearance. Refer to the detailed instructions provided in the packaging for specific mounting steps.
This image illustrates the concealed mounting bracket, which allows the heater to be securely attached to the wall while maintaining a sleek, integrated look.
This image highlights the ease of installation for the convector heater, emphasizing its user-friendly design for mounting.
3.3 Elektrik Bağlantısı:
This unit requires a 240V hardwired electric connection. Ensure the power supply is off at the circuit breaker before making any electrical connections. Connect the black and red wires, and ensure the ground wire is securely attached.
A diagram showing the necessary wiring for a 240V hardwired connection, including the black, red, and ground wires, for safe and proper electrical setup.
Video: Stelpro SOR1 High-End Convector Overview
Bu videoview of a Stelpro high-end convector, demonstrating its features and design, which may be similar to the UHC2002WCW model.
4. Operasyon
The UHC2002WCW convector heater operates in conjunction with an external wall thermostat (sold separately). This thermostat will control the heater's on/off cycles to maintain the desired room temperature.
4.1 Vattage Ayarlar:
The heater includes an internal switch to select between 1000W and 2000W output. This allows for flexibility based on the heating needs of the room. To adjust the wattage, the front panel must be removed, and the switch located inside the unit should be toggled. Always ensure the power supply is disconnected before accessing internal components.
This image shows the internal components of the heater, specifically highlighting the switch that allows users to select between 1000W and 2000W heating modes.
4.2 Thermostat Control:
Once installed and wired, the heater will respond to the external wall thermostat. Set the desired temperature on your wall thermostat, and the heater will activate or deactivate to maintain that setting.
5. Bakım
Regular maintenance ensures optimal performance and longevity of your convector heater. Always disconnect power at the circuit breaker before performing any maintenance.
- Temizlik: Periodically wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the heater.
- Toz Giderimi: Gently vacuum or brush away any dust accumulation from the air intake and outlet grilles.
- Denetleme: Annually inspect the power connections and mounting for any signs of wear or damage. If any issues are found, consult a qualified electrician.
6. Sorun Giderme
If you experience issues with your heater, refer to the following common troubleshooting steps. For problems not listed here, contact customer support or a qualified electrician.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Isıtıcı açılmıyor. | No power supply; Thermostat set too low; Internal wattage switch off. | Check circuit breaker/fuse. Ensure thermostat is set above room temperature. Verify internal wattage switch is in 1000W or 2000W position (power off before checking). |
| Yetersiz ısı çıkışı. | Netage setting too low; Room size exceeds heater capacity; Airflow obstruction. | Check internal wattage switch (set to 2000W if needed). Ensure heater capacity matches room size. Clear any obstructions from grilles. |
| Çalışma sırasında olağandışı sesler. | Loose components; Dust accumulation in fan. | Ensure all mounting screws are tight. Clean fan and internal components (power off first). If noise persists, contact support. |
7. Özellikler
| Özellik | Detay |
|---|---|
| Marka | Stelpro |
| Model Numarası | UHC2002WCW |
| Renk | Beyaz |
| Ürün Boyutları | 88.9 x 10 x 44.61 cm (35 x 3.9 x 17.5 inç); 8.57 kg (18.9 lbs) |
| Güç/Wattage | 2000 watt (240V'ta) |
| Cilttage | 240 Volt |
| Malzeme | Çelik |
| Özel Özellik | Cool Touch Dış Görünüm |
| Isıtma Yöntemi | Konveksiyon |
| Montaj Tipi | Duvara Montaj |
| İç/Dış Mekan Kullanımı | Kapalı |
| İş Yeri | Stelpro - 1041 Rue Parent, Saint-Bruno-de-Montarville, QC J3V 0A2 |
8. Garanti ve Destek
Stelpro products are proudly made in Canada. For warranty information, technical support, or service inquiries, please refer to the official Stelpro webSite üzerinden satın alabilir veya müşteri hizmetleri departmanıyla iletişime geçebilirsiniz. Garanti talepleriniz için satın alma fişinizi saklayın.
This image features the "Proudly Made in Canada" logo, indicating the origin of Stelpro products.
