Ecolight 12 inç Pilli LED Dokunmatik Bar Lambası Kullanım Kılavuzu

1. Giriş

This manual provides detailed instructions for the installation, operation, and maintenance of your Ecolight 12-inch Battery-Operated LED Tap Bar Light. This product is designed to provide convenient, wire-free illumination for various indoor applications such as under cabinets, workspaces, closets, and recreational areas. Please read this manual thoroughly before use and retain it for future reference.

2. Güvenlik Bilgileri

• This product is intended for indoor use only. Do not expose to moisture or extreme temperatures.
• Eski ve yeni pilleri veya farklı pil türlerini (örneğin, alkalin ve şarj edilebilir pilleri) bir arada kullanmayın.
• Pillerin doğru kutuplara (+/-) dikkat edilerek takıldığından emin olun. Yanlış takma hasara neden olabilir.
• Pil sızıntısını önlemek için, lamba uzun süre kullanılmayacaksa pilleri çıkarın.
• Pilleri çocukların erişemeyeceği yerlerde saklayın.
• Do not attempt to disassemble or modify the light bar. This will void the warranty and may cause damage or injury.
• Use only the mounting hardware provided or suitable alternatives for secure installation.

3. Neler Dahil?

Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

• 1 x Ecolight 12-inch LED Tap Bar Light
• 6 x AA Pil
• 4 x Command™ Picture Hanging Strips
• 2 x Montaj Vidaları

Image 3.1: Contents of the package, including the light bar, batteries, Command strips, and screws.

4. Kurulum

4.1 Pil Kurulumu

1. Locate the battery compartment cover on the back of the light bar.
2. Bölmeyi açmak için kapağı kaydırın veya açın.
3. 6 adet AA pili, bölmenin içinde gösterildiği gibi doğru kutuplara (+ ve -) dikkat ederek yerleştirin.
4. Pil bölmesi kapağını güvenli bir şekilde yerine takın.

4.2 Montaj Seçenekleri

The Ecolight LED Tap Bar Light offers two mounting methods:

• Temporary/Damage-Free Mounting: Using Command™ Picture Hanging Strips. Ideal for surfaces where you want to avoid holes.
• Kalıcı Montaj: Using the provided screws. Provides a more secure, long-term installation.

4.2.1 Mounting with Command™ Strips

1. Clean the mounting surface with rubbing alcohol and let it dry completely. Do not use household cleaners.
2. Separate the Command™ Strips. Press two strips together until they click. Repeat for the other two strips.
3. Remove the red liner from one side of each pair of strips and press them firmly onto the back of the light bar.
4. Remove the black liner from the other side of each pair of strips.
5. Align the light bar with the desired mounting location and press firmly against the surface for 30 seconds.
6. To ensure adhesive strength, remove the light bar by pulling it up and away from the strips. Press the strips firmly against the wall for another 30 seconds.
7. Wait 1 hour before reattaching the light bar to the strips.

4.2.2 Vidalarla Montaj

1. Identify the two keyhole slots on the back of the light bar.
2. Hold the light bar in the desired mounting location and mark the positions for the two screws through the keyhole slots.
3. Drill pilot holes at the marked locations if necessary.
4. Verilen vidaları, vida başının küçük bir kısmını açıkta bırakacak şekilde, önceden açılmış deliklere yerleştirin.
5. Align the keyhole slots on the back of the light bar with the exposed screw heads and slide the light bar down to secure it.
6. Tighten the screws if the light bar feels loose, but do not overtighten.

Image 4.1: Product dimensions for planning installation space.

Resim 4.2: Örn.ample of the light bar installed under a cabinet.

5. Operasyon

5.1 Açma/Kapatma

The Ecolight LED Tap Bar Light features a simple tap activation. To turn the light ON or OFF, gently tap the translucent lens on the front of the light bar.

Image 5.1: Tap On/Off activation method.

5.2 Zamanlayıcı Ayarı

The light bar includes a built-in auto-off timer to conserve battery life. The timer switch is located on the side of the unit. You can select from the following modes:

• AÇIK: The light remains continuously on until manually turned off.
• 1 DK: The light automatically turns off after 1 minute.
• 5 DK: The light automatically turns off after 5 minutes.
• 15 DK: The light automatically turns off after 15 minutes.

To manually turn off the light when a timer setting is active, tap the bar a second time.

Image 5.2: Timer setting switch on the light bar.

6. Bakım

6.1 Temizlik

To clean the light bar, wipe it gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or sprays, as these may damage the finish or internal components.

6.2 Pil Değişimi

When the light output diminishes, it is time to replace the batteries. Follow the battery installation steps (Section 4.1) to replace all 6 AA batteries with new ones. Always replace all batteries at the same time and use the same type of battery.

7. Sorun Giderme

8. Özellikler

9. Garanti ve Destek

9.1 Garanti Bilgileri

This Ecolight product is covered by a 6 yıllık sınırlı garanti from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, modification, or unauthorized repair. Please retain your proof of purchase for warranty claims.

9.2 Müşteri Desteği

If you have any questions, require assistance, or encounter issues not covered in this manual, please contact Ecolight customer support. Refer to the product packaging or the official Ecolight webGüncel iletişim bilgileri için siteyi ziyaret edin.