giriiş
Thank you for choosing the cellularline Universal Car Holder. This manual provides essential information for the correct installation, operation, and maintenance of your new car holder. Please read these instructions carefully before use and retain them for future reference.
Ürün Bittiview
The cellularline Universal Car Holder is designed to securely hold your smartphone in your vehicle, providing optimal viewing angles for navigation and hands-free use. Its compact and versatile design features a clamp mechanism that securely grips your smartphone on two sides. The holder is equipped with a 360° rotatable ball joint for flexible positioning and attaches easily to most car air vents.
This specific variant is presented in a modern and vibrant pink color.
Paket İçeriği
Paketi açtığınızda lütfen tüm bileşenlerin mevcut ve hasarsız olduğundan emin olun:
- 1x cellularline Universal Car Holder
- 1x Kullanım Kılavuzu
Kurulum ve Yükleme
Follow these steps to properly install your car holder:
- Identify Compatible Air Vents: The car holder is designed for attachment to most car air vents. Ensure your vehicle's air vents are compatible. The holder is generally suitable for horizontal and vertical straight-line vents, but not for circular or unusually shaped vents.
- Havalandırma deliğine takın: Gently push the clip on the back of the holder onto one of the slats of your car's air vent. Ensure it is firmly seated and stable.
- Adjust Holder Angle: The holder features a 360° rotatable ball joint. Adjust the angle to your preferred viewing position before inserting your smartphone.
- Akıllı Telefonu Takın: Gently pull apart the adjustable arms of the holder and place your smartphone inside. The holder's arms will automatically secure the device. Ensure your smartphone is centered and held firmly.
Figure 1: Air Vent Compatibility. This image illustrates which types of air vents are compatible (straight horizontal or vertical) and which are not (circular or complex designs).
Şekil 2: Ayarlanabilir View Angle. The holder allows for 360-degree rotation, enabling both portrait and landscape orientation for your smartphone.
Figure 3: Anti-Scratch Clip. The clip is designed to securely attach to air vents while minimizing the risk of scratches.
Figure 4: Wide Compatibility. The holder's adjustable arms can accommodate smartphones with widths between 55mm and 90mm, typically fitting devices from 4 to 6.5 inches.
Figure 5: Stable and Reliable Hold. The holder is designed to maintain a stable grip on your smartphone even during challenging driving conditions such as rugged roads, sharp turns, and speed bumps.
Kullanım Talimatları
- Securing Your Smartphone: The holder's spring-loaded arms automatically adjust to the width of your smartphone, providing a secure grip. Ensure the phone is centered for optimal balance.
- Ayarlama Viewaçı: Utilize the 360° rotatable ball joint to position your smartphone for the best viewing angle. This allows for easy switching between portrait and landscape modes.
- Akıllı Telefonunuzu Çıkarma: Gently pull apart the holder's arms to release your smartphone.
Bakım
To ensure the longevity and proper functioning of your cellularline Car Holder, follow these simple maintenance guidelines:
- Temizlik: Wipe the holder with a soft, dry, or slightly damp Bez kullanın. Yüzeye zarar verebileceğinden sert kimyasallar veya aşındırıcı temizleyiciler kullanmaktan kaçının.
- Depolamak: Uzun süre kullanılmadığı zamanlarda, tutucuyu serin, kuru ve doğrudan güneş ışığından uzak bir yerde saklayın.
- Denetleme: Periodically check the holder for any signs of wear or damage, especially the air vent clip and the smartphone gripping arms.
Sorun giderme
This section addresses common issues you might encounter with your cellularline Universal Car Holder.
- Holder is not stable on air vent: Ensure the air vent clip is fully inserted onto a vent slat. Verify that your car's air vent type is compatible (refer to Figure 1). Avoid using on loose or damaged vent slats.
- Smartphone is not held securely: Ensure the smartphone is centered between the holder's arms. The holder is designed for smartphones with widths between 55mm and 90mm. If your phone is outside this range, it may not be held securely.
- Difficulty rotating the holder: Check for any obstructions around the ball joint. Ensure no excessive force is applied, as the joint should rotate smoothly.
Özellikler
| Özellik | Detay |
|---|---|
| Marka | hücresel hat |
| Örnek | Universal Car Holder (B01IQODSYQ) |
| Renk | Rosa (Pink) |
| Uyumlu Cihazlar | Akıllı telefonlar |
| Uyumlu Telefon Modelleri | Universal (fits widths 55mm - 90mm, approx. 4" - 6.5" screen size) |
| Montaj Tipi | Hava Firar Klipsi |
| Rotasyon | 360° Ball Joint |
Garanti ve Destek
Specific warranty information for the cellularline Universal Car Holder is typically provided with the product packaging or can be found on the official cellularline website. For technical support, product inquiries, or warranty claims, please refer to the contact information provided by cellularline in your region or visit their official webalan.
You can visit the cellularline store on Amazon for more products: cellularline Store
