Smartwares SC45 Motion Sensor Alarm System User Manual

1. Giriş

Thank you for choosing the Smartwares SC45 Motion Sensor Alarm System. This device is designed to secure small areas such as kiosks, apartments, or small shops by detecting motion and triggering a loud alarm. Please read this manual carefully before installation and use to ensure proper operation and safety.

2. Güvenlik Bilgileri

• Cihazı su ve nemden uzak tutunuz.
• Cihazı kendiniz açmaya veya onarmaya çalışmayın. Servis için yetkili personele başvurun.
• Pillerin doğru kutuplara yerleştirildiğinden emin olun.
• Tüm pilleri aynı anda değiştirin. Eski ve yeni pilleri karıştırma.
• Pilleri yerel yönetmeliklere uygun şekilde sorumlu bir şekilde atın.
• Bu cihaz yalnızca iç mekanda kullanıma yöneliktir.

3. Paket İçeriği

Paket aşağıdaki öğeleri içermelidir:

• 1x Smartwares SC45 Motion Sensor Alarm Unit
• 2x Uzaktan Kumanda
• 4x AA Batteries (for the sensor unit)
• Mounting hardware (screws and wall plugs, or adhesive strips)

4. Ürün Bittiview

Familiarize yourself with the components of your Smartwares SC45 Motion Sensor Alarm System.

Şekil 1: The Smartwares SC45 Motion Sensor Alarm unit with one remote control. The sensor unit is white with a dark grey detection lens and a red indicator light at the bottom. The remote control is also white with 'ON' and 'OFF' buttons.

Şekil 2: Taraf view of the motion sensor alarm unit, showing the integrated mounting bracket for wall or corner installation.

Şekil 3: Kapatmak view of the remote control, featuring distinct 'ON' and 'OFF' buttons and a red indicator light.

5. Kurulum ve Kurulum

5.1 Pil Kurulumu

1. Locate the battery compartment on the back of the motion sensor unit.
2. Pil kapağını kaydırarak açın.
3. Pil yuvasının içindeki işaretlere uyarak 4 adet AA pili doğru kutuplara (+/-) dikkat ederek yerleştirin.
4. Pil kapağını sıkıca kapatın.
5. The unit will emit a short beep to indicate it is powered on.

5.2 Sensörü Monte Etme

The Smartwares SC45 can be mounted using adhesive strips or screws. Choose a location that provides optimal coverage of the area you wish to protect, typically in a corner or on a wall, facing the entry point.

• For Adhesive Mounting: Clean the desired surface thoroughly. Apply strong double-sided adhesive strips (not included, unless specified in package contents) to the back of the sensor unit and press firmly onto the wall.
• Vida Montajı İçin:
  1. Mark the desired mounting position on the wall.
  2. Gerekirse pilot delikler açın.
  3. Secure the mounting bracket (if detachable) or the unit directly using the provided screws.
  4. Ensure the sensor is positioned to cover the intended detection area. The detection range is up to 8 meters.

Şekil 4: Example of the motion sensor alarm installed in the corner of a room, providing wide coverage.

6. Kullanım Talimatları

The Smartwares SC45 is operated using the included remote controls.

6.1 Arming the Alarm

• Basın ON Uzaktan kumandadaki düğmeye basın.
• The sensor unit will emit a short beep, and the red indicator light will flash briefly, indicating that the alarm is armed.
• There is an exit delay period (typically 10-15 seconds) during which you can leave the protected area without triggering the alarm.

6.2 Disarming the Alarm

• Upon entering the protected area, the sensor will detect motion and an entry delay period will begin (typically 5-10 seconds).
• During this delay, press the KAPALI Uzaktan kumandadaki düğmeye basın.
• The sensor unit will emit a short beep, and the red indicator light will turn off, indicating that the alarm is disarmed.
• If the alarm is not disarmed within the entry delay period, the siren will sound.

6.3 Alarm Trigger

• If motion is detected while the alarm is armed and the entry delay expires without disarming, the siren will sound at 105 dB.
• The alarm will typically sound for a set duration (e.g., 30-60 seconds) and then reset, re-arming itself.

7. Bakım

7.1 Pil Değişimi

When the alarm unit's indicator light remains dimly lit or the alarm performance degrades, it is time to replace the batteries.

1. Alarmı devre dışı bırakın.
2. Ünitenin arkasındaki pil bölmesini açın.
3. Eski AA pilleri çıkarın.
4. 4 adet yeni AA alkalin pili, doğru kutuplara dikkat ederek takın.
5. Pil kapağını kapatın.
6. Test the alarm's functionality with the remote control.

Note: Remote control batteries (e.g., CR2032 coin cell) may also need occasional replacement. Refer to the remote control's specific instructions if provided.

7.2 Temizlik

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the unit.

8. Sorun Giderme

9. Özellikler

10. Garanti ve Destek

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Smartwares customer service directly. Keep your proof of purchase for warranty claims.