DEWALT 20V MAX XR Hammer Drill Kit (DCD996P2) Instruction Manual

giriiş

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your DEWALT 20V MAX XR Hammer Drill Kit (DCD996P2). This cordless kit includes one 1/2-inch hammer drill/driver, two 20V MAX* 5.0Ah batteries, a charger, and a hard case. The hammerdrill features a heavy-duty ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength and a high-efficiency brushless motor that delivers extended runtime. The DCD996 also includes a 3-mode LED for illumination in dark or confined spaces.

Temel Özellikler

• Fırçasız Motor: DEWALT-built high power, high efficiency brushless motor delivers up to 75% more runtime compared to 18V NiCad brushed motors.
• XR Lityum İyon Piller: 5.0Ah batteries with fuel gauge provide 33% more capacity over standard packs.
• Heavy-Duty Chuck: 1/2-inch ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength.
• 3 Modlu LED: Provides lighting in dark or confined spaces, up to 20X brighter than previous models.
• LED Spot Işık Modu: Features a 20-minute shutoff function for extended work time in dark or confined spaces.
• 3-Hızlı Şanzıman: All-metal high-performance transmission optimizes tool-to-task for fast application speeds and improved run-time.
• Drill Mode RPM: 0-450 / 0-1300 / 0-2000 RPM.
• Hammerdrill Mode RPM: 0-500 / 0-1500 / 0-2250 RPM.
• BPM for Masonry: Up to 0-38,250 BPM for fast drilling in masonry materials.

Dahil Bileşenler

• (1) DCD996 - 20V MAX* XR Lithium Ion Brushless Premium 3-Speed Hammerdrill
• (2) DCB205 - 20V MAX* XR High Capacity Li-Ion Batteries (5.0Ah)
• Şarj cihazı
• Kemer Kancası
• 360° Yan Sap
• Kit kutusu

Güvenlik Bilgileri

Always wear appropriate personal protective equipment (PPE) including safety glasses, hearing protection, and gloves when operating the hammer drill. Ensure the work area is clear of obstructions and well-lit. Disconnect the battery pack before making any adjustments, changing accessories, or storing the tool. Read and understand all instructions and safety warnings provided with the product before use.

Kurmak

Pil Takma ve Çıkarma

1. To install the battery pack, align the battery pack with the rails inside the tool's handle and slide it firmly into the tool until it locks into place.
2. To remove the battery pack, press the battery release button and pull the battery pack out of the tool handle.

Pilin Şarj Edilmesi

1. Şarj cihazını uygun bir prize takın.
2. Insert the battery pack into the charger. The charging indicator light will illuminate.
3. A fully discharged battery typically charges in approximately 60-90 minutes.

Yan Sapın Takılması

The 360° side handle provides additional control and stability, especially during high-torque applications or when using larger drill bits. To attach, loosen the handle grip, slide it over the chuck and onto the tool's collar, then tighten the grip securely.

Kullanım Talimatları

Çalışma Modunun Seçilmesi

Rotate the collar near the chuck to select between three modes:

• Matkap Modu: Ahşap, metal ve plastik malzemelerde delme işlemleri için.
• Hammerdrill Mode: Duvar, beton ve tuğlaya delme işlemi için.
• Driver Mode (Clutch Settings): For driving screws, with 11 clutch settings to prevent over-driving or stripping.

Hız Ayarlarını Ayarlama

Use the 3-speed selector switch located on top of the tool to match the speed to the application:

• Hız 1 (Düşük): 0-450 RPM (Drill Mode), 0-500 RPM (Hammerdrill Mode) - For high torque applications and larger diameter drilling.
• Hız 2 (Orta): 0-1300 RPM (Drill Mode), 0-1500 RPM (Hammerdrill Mode) - For general drilling and driving.
• Hız 3 (Yüksek): 0-2000 RPM (Drill Mode), 0-2250 RPM (Hammerdrill Mode) - For fast drilling in smaller diameters.

Chuck Operation

The 1/2-inch ratcheting chuck allows for quick and secure bit changes. To open the chuck, rotate the front sleeve counter-clockwise. Insert the drill bit and rotate the sleeve clockwise until the bit is firmly gripped. The ratcheting mechanism will click when tightened.

LED Işık Modları

The LED light can be adjusted using the switch on the base of the tool:

• Düşük Parlaklık: Provides minimal illumination.
• Medium Brightness: Offers increased visibility for most tasks.
• Spot Işığı Modu: Activates a high-brightness light that stays on for 20 minutes, ideal for extended work in dark areas.

Bakım

Temizlik

Regularly clean the tool's ventilation slots to prevent overheating. Use a soft brush or dry cloth to remove dust and debris. Do not use water or chemical cleaning agents. Keep the chuck clean and free of debris for optimal bit gripping.

Depolamak

Store the tool and batteries in a cool, dry place, away from direct sunlight and extreme temperatures. Always remove the battery pack from the tool before storage. Use the provided hard case for protection during transport and storage.

Sorun giderme

Tool Not Operating

• Ensure the battery pack is fully charged and properly inserted into the tool.
• Check if the forward/reverse button is in the center (lock) position.
• Verify that the tool is not overheated. Allow it to cool down if necessary.

Pil Şarj Olmuyor

• Confirm the charger is properly plugged into a working outlet.
• Ensure the battery pack is correctly seated in the charger.
• Check the charger's indicator lights for error codes (e.g., hot/cold delay).

Özellikler

Garanti ve Destek

Bu DEWALT ürünü bir 3 yıllık sınırlı garanti. For warranty claims, service, or technical support, please refer to the contact information provided in your product packaging or visit the official DEWALT webalan.

Ürün Görselleri

The DEWALT 20V MAX XR Hammer Drill Kit (DCD996P2) with a 5.0Ah battery attached, showcasing its compact design and yellow/black color scheme.

The DEWALT 20V MAX XR Hammer Drill (DCD996P2) with its adjustable side handle attached, providing enhanced control for heavy-duty tasks.

Üç çeyrek view of the DEWALT 20V MAX XR Hammer Drill (DCD996P2), showing the side handle, 5.0Ah battery, and the robust chuck.

Dahili view of the DEWALT 20V MAX XR Hammer Drill (DCD996P2), highlighting the brushless motor and internal components for efficient operation.

The DEWALT 20V MAX XR Hammer Drill (DCD996P2) from the side, featuring the 5.0Ah battery, belt clip, and mode selector.

Yakın çekim view of the base of the DEWALT 20V MAX XR Hammer Drill (DCD996P2) with the 5.0Ah battery, showing the integrated LED light and its control switch.

The DEWALT 20V MAX XR Hammer Drill (DCD996P2) with the LED light activated on its base, providing illumination for the work area.

Resmi Ürün Videosu