1. Giriş
This instruction manual provides essential information for the proper installation, use, and maintenance of your Brandt Universal Refrigerator Handle. Please read this manual thoroughly before installation and retain it for future reference. This handle is designed as a generic replacement part for various Brandt refrigerator models, ensuring compatibility and functionality.
2. Güvenlik Bilgileri
- Always disconnect power to the refrigerator before attempting any installation or repair.
- Yaralanmayı önlemek için eldiven gibi uygun kişisel koruyucu ekipman giyin.
- Herhangi bir adımda emin değilseniz, kalifiye bir teknisyene danışın.
- Boğulma tehlikesini önlemek için küçük parçaları çocuklardan uzak tutun.
3. Paket İçeriği
Paketi açtığınızda tüm bileşenlerin eksiksiz ve hasarsız olduğundan emin olun.
- 1 x Brandt Universal Refrigerator Handle (Metallic Silver)
- Note: Mounting screws or hardware may not be included and might need to be reused from the original handle or purchased separately.
Resim 1: The Brandt Universal Refrigerator Handle. This image displays the metallic silver handle with its oblong shape and white end caps, ready for installation.
4. Kurulum Talimatları
Follow these steps carefully to install the refrigerator handle. The process may vary slightly depending on your specific refrigerator model.
- Alanı Hazırlayın: Ensure the refrigerator door is clean and free of debris where the handle will be mounted.
- Eski Sapı Çıkarın (eğer varsa): If replacing an existing handle, locate the mounting screws. These are typically found on the inside edge of the door or under decorative caps on the handle itself. Use an appropriate screwdriver to remove them. Carefully detach the old handle.
- Align the New Handle: Position the new Brandt Universal Refrigerator Handle over the existing mounting holes on the refrigerator door. Ensure the center-to-center spacing of 200mm aligns correctly with your door's mounting points.
- Sapı Sabitleyin: Insert the mounting screws (reusing old ones if compatible, or using new ones of the correct size) through the handle's mounting points and into the door. Tighten the screws firmly but do not overtighten, as this can strip the threads or damage the handle/door.
- Kurulumu Test Edin: Gently pull on the newly installed handle to ensure it is securely attached and does not wobble.
For models where the mounting points are not visible, refer to your refrigerator's specific service manual for handle removal and installation procedures.
5. Sapın Çalıştırılması
The Brandt Universal Refrigerator Handle is designed for simple and reliable operation. To open the refrigerator door, grasp the handle firmly and pull gently. Avoid excessive force or sudden jerking motions, as this can stress the mounting points and potentially damage the handle or door.
6. Bakım
To ensure the longevity and appearance of your refrigerator handle, follow these maintenance guidelines:
- Temizlik: Wipe the handle regularly with a soft cloth dampened with mild soap and water. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can scratch or damage the metallic finish.
- Denetleme: Periodically check the handle for any signs of looseness. If the handle feels loose, gently tighten the mounting screws. Do not overtighten.
- Etkiden Kaçının: Protect the handle from impacts or heavy objects that could cause dents or structural damage.
7. Sorun Giderme
- Sapı gevşek:
Olası Neden: Mounting screws have loosened over time.
Çözüm: Locate the mounting screws (usually on the inside of the door or under caps) and carefully tighten them with an appropriate screwdriver. Do not overtighten.
- Handle is difficult to install:
Olası Neden: Incorrect alignment or incompatible mounting holes.
Çözüm: Double-check the center-to-center spacing (200mm) of the handle against your refrigerator door's mounting points. Ensure the handle is oriented correctly. If the holes do not align, this handle may not be compatible with your specific refrigerator model, or additional adapters might be required (not included).
8. Özellikler
| Özellik | Detay |
|---|---|
| Marka | Marka |
| Model Numarası | 480132101115 |
| Tip | Universal Refrigerator Handle |
| Renk | Metalik Gümüş |
| Malzeme | Metal, Paslanmaz Çelik |
| Şekil | Dikdörtgen |
| Merkezden Merkeze Aralık | 200 mm |
| Parça Sayısı | 1 |
| Uyumlu Modeller | SF26201, SF2620/1, SF26710, SL28710, ZFA1715, ZFA1715/1, ZFA17151, FFA1650, FFA1670, SF26810, UD2024, UL2021, UL2321, ULN2200, ULN2201, ULN2500, ULN2501, SL28200-1, SL2820, SL28201, CEN31221E, CEN3122, 46X4146, 46X3612, 46X5382 (and others with 200mm spacing) |
9. Garanti ve Destek
Information regarding specific warranty terms for this Brandt Universal Refrigerator Handle (Model 480132101115) is not available in the provided product details. For warranty inquiries or technical support, please contact the retailer or Brandt customer service directly. Spare parts availability information is also not provided.
