Scanstrut RlS-401 Rokk Mini Yüzeye Montaj Kullanım Kılavuzu

1. Giriş

Thank you for choosing the Scanstrut RlS-401 Rokk Mini Surface Mount. This versatile screw-down base is designed for secure installation on any flat surface, providing a robust mounting solution for your ROKK Mini top plates and the RLS-AM ROKK Mini Body. Engineered with tough, marine-grade, UV-stable materials, it ensures reliable performance in various environments, from marine to land-based applications.

2. Kutuda Neler Var?

• Scanstrut RlS-401 Rokk Mini Surface Mount Screw Down Base
• Montaj Vidaları (Adet: 4)
• D-ring accessory

This image displays the Scanstrut RlS-401 Rokk Mini Surface Mount base, along with four mounting screws and a metal D-ring accessory.

3. Özellikler

• Fits any flat surface
• Tough, marine-grade, UV-stable materials
• Kolay kurulum
• Compatible with all ROKK Mini top plates and the RLS-AM ROKK Mini Body

4. Özellikler

5. Kurulum

The RlS-401 Rokk Mini Surface Mount is designed for quick and easy installation on any flat surface. Follow these general steps for mounting:

1. Bir Konum Seçin: Select a flat, stable surface where you intend to mount your device. Ensure there is sufficient space for the mount and the attached device.
2. Tabanı Konumlandırın: Place the Rokk Mini Surface Mount base in the desired position.
3. Matkap Deliklerini İşaretleyin: Use a pencil or marker to mark the locations for the four mounting screws through the pre-drilled holes on the base.
4. Pilot Delikleri Delin: Carefully drill pilot holes at the marked locations. Ensure the drill bit size is appropriate for the provided screws and the mounting surface material.
5. Üssü Güvence Altına Alın: Align the base with the pilot holes and secure it firmly using the provided mounting screws. Ensure all screws are tightened to prevent movement.
6. Attach ROKK Mini Components: Once the base is securely mounted, you can attach your ROKK Mini top plate or RLS-AM ROKK Mini Body to the base.

The image shows the Rokk Mini Surface Mount securely installed on the side of a boat, supporting a tablet device. This demonstrates a typical marine installation.

6. Çalıştırma

The Rokk Mini Surface Mount serves as a stable foundation for your ROKK Mini system. Once the base is installed, operating your device involves interacting with the ROKK Mini top plate or RLS-AM ROKK Mini Body that is attached to it.

• Cihazların Takılması: Align your ROKK Mini top plate (e.g., phone holder, tablet holder) or RLS-AM ROKK Mini Body with the mounting interface on the surface mount base and secure it according to the instructions provided with your specific ROKK Mini accessory.
• Konumun Ayarlanması: If your ROKK Mini accessory includes articulation, adjust its position as needed for optimal viewerişim veya erişim.
• Detaching Devices: To remove your device, follow the detachment procedure for your specific ROKK Mini accessory.

A person is shown using a tablet that is mounted on a Scanstrut Rokk Mini Surface Mount, positioned on a desk inside a boat. This illustrates the product's use in an indoor marine setting.

7. Bakım

The Scanstrut RlS-401 Rokk Mini Surface Mount is constructed from durable, marine-grade, UV-stable materials designed to withstand harsh environments. Regular maintenance will ensure its longevity and continued performance.

• Temizlik: Periodically clean the mount with fresh water and a mild soap solution. Rinse thoroughly to remove any salt residue or dirt. Avoid using harsh chemicals or abrasive cleaners, which can damage the material.
• Denetleme: Regularly inspect the mount for any signs of wear, damage, or loose screws. Ensure all mounting screws remain tight and secure.
• UV Koruması: While the materials are UV-stable, prolonged exposure to extreme sunlight can still cause minor fading over many years. No special UV protection treatment is typically required.

This close-up image shows the Scanstrut Rokk Mini Surface Mount base covered in water droplets, highlighting its robust, marine-grade, and water-resistant construction suitable for harsh environments.

8. Sorun Giderme

Most issues with the Rokk Mini Surface Mount relate to installation. If you encounter problems, consider the following:

• Montaj gevşek gibi görünüyor: Ensure all four mounting screws are fully tightened. If the surface material is soft, consider using larger washers (not included) to distribute the load.
• Difficulty Attaching ROKK Mini Accessory: Verify that you are using a compatible ROKK Mini top plate or RLS-AM ROKK Mini Body. Ensure the accessory is correctly aligned with the base before attempting to secure it.
• Mounting Surface Damage: If the mounting surface shows signs of cracking or weakening, the mount may need to be relocated or the surface reinforced.

9. Garanti ve Destek

For information regarding warranty coverage, product returns, or technical support, please refer to the official Scanstrut website or contact Scanstrut customer service directly. Keep your proof of purchase for any warranty claims.

Scanstrut Official Webalan: www.scanstrut.com