1. Giriş
This manual provides essential information for the proper installation, operation, and maintenance of your Diesel Wiper WT632 Wiper Blade Assembly. Designed for recreational vehicles, this heavy-duty wiper blade ensures clear visibility under various conditions.
Temel özellikler şunlardır:
- Durable metal construction for longevity.
- Heavy-duty natural rubber wiping element for effective performance.
- Designed to fit a wide range of RV wiper arms with included adaptors.
- Blade length: Approximately 40 inches (1000mm).
2. Paket İçeriği
Paketi açtıktan sonra, tüm bileşenlerin eksiksiz ve hasarsız olduğundan emin olun. Pakette şunlar bulunmalıdır:
- 1 x Diesel Equipment (Truvision) WT6-32 Heavy Duty Blade Assembly (approximately 40 inches / 1000mm in length).
Figure 2.1: Diesel Wiper WT632 Wiper Blade Assembly. This image shows the full length of the black wiper blade assembly, highlighting its robust metal frame and rubber wiping edge.
3. Kurulum ve Kurulum
Doğru kurulum, en iyi performans ve güvenlik için çok önemlidir. Lütfen şu adımları dikkatlice izleyin:
- Aracı Hazırlayın: Park your vehicle on a level surface and turn off the ignition. Lift the existing wiper arm away from the windshield until it locks into the upright position. Place a towel or protective cloth on the windshield to prevent damage if the arm accidentally falls.
- Eski Silecek Lastiğini Çıkarın: Identify the attachment point of your current wiper blade. The WT632 typically uses a "Pinch Tab" mounting type. Press the small tab on the wiper arm connector and slide the old blade off the arm. Some older models may require a different removal method; consult your vehicle's manual if unsure.
- Yeni Silecek Lastiği Takın: Align the new Diesel Wiper WT632 blade's connector with the wiper arm's hook or pinch tab mechanism. Slide the blade onto the arm until it clicks securely into place. Gently pull on the blade to ensure it is firmly attached.
- Alt Silecek Kolu: Carefully lower the wiper arm back onto the windshield. Ensure the blade lies flat against the glass.
- Test İşlemi: Before driving, activate your vehicle's wipers to ensure the new blades operate smoothly and clear the windshield effectively. Check for any obstructions or unusual noises.
Note: If your vehicle uses a different wiper arm type, adaptors may be required. The Diesel Wiper WT632 is designed for easy installation onto most wiper arms, but specific vehicle models may vary.
4. Operasyon
The Diesel Wiper WT632 Wiper Blade Assembly operates in conjunction with your vehicle's existing wiper system. Once installed, the blades will function automatically when the wiper controls are activated. Ensure your windshield is wet before operating wipers to prevent damage to the blade or windshield.
- Düzenli Kullanım: Use wipers as needed during rain, snow, or when the windshield is dirty.
- Ön Cam Yıkama Sıvısı: Always use windshield washer fluid to lubricate the windshield and assist in cleaning, especially when removing stubborn dirt or debris.
5. Bakım ve Özen
To extend the lifespan and maintain the performance of your Diesel Wiper WT632 blades, follow these maintenance tips:
- Düzenli Temizlik: Periodically clean the rubber wiping element with a soft cloth or sponge and mild soap and water. Wipe along the length of the blade to remove dirt, grime, and road film. Rinse thoroughly.
- Hasarı Kontrol Edin: Regularly inspect the rubber blade for cracks, tears, or hardening. Also, check the metal frame for bends or corrosion. Damaged blades should be replaced promptly.
- Kuru silmeden kaçının: Never operate the wipers on a dry windshield, as this can damage the rubber blade and scratch the glass. Always use windshield washer fluid or water.
- Kış Bakımı: In freezing conditions, ensure blades are not frozen to the windshield before operation. Gently lift them away from the glass or use a defroster. Do not use hot water, as it can crack the windshield.
6. Sorun Giderme
If you experience issues with your wiper blades, refer to the following common problems and solutions:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Çizgi veya lekelenme | Dirty blade, worn rubber, bent wiper arm, or windshield contamination. | Bıçağı reklamla temizleyinamp cloth. If streaking persists, inspect the rubber for wear and replace if necessary. Check wiper arm for proper pressure. Clean windshield thoroughly. |
| Gevezelik veya atlama | Blade angle incorrect, dry windshield, or hardened rubber. | Ensure windshield is wet during operation. Check if the wiper arm is bent, causing improper blade contact. Replace blade if rubber is hardened. |
| Eksik Silme Alanı | Worn blade, incorrect blade length, or weak wiper arm spring. | Inspect blade for wear and replace if necessary. Verify correct blade length for your vehicle. Consult a professional if wiper arm spring is weak. |
7. Özellikler
| Bağlanmak | Detay |
|---|---|
| Marka | Dizel |
| Model Numarası | WT632 |
| OEM Parça Numarası | WT6-32 |
| Ürün Türü | Auto Accessory (Wiper Blade Assembly) |
| Araç Servis Tipi | Car (Recreational Vehicle) |
| Uygun Tip | Araç Özel Uyum |
| Ürün Uzunluğu | Approximately 40 inches (1000mm) |
| Montaj Tipi | Kıstırma Sekmesi |
| Ürün Ağırlığı | 1 pound |
| Menşei ülke | Çin |
8. Garanti Bilgileri
Specific warranty details for the Diesel Wiper WT632 Wiper Blade Assembly are not provided in this manual. For information regarding product warranty, please refer to the product packaging or contact Diesel customer support directly. Keep your proof of purchase for any warranty claims.
9. Müşteri Desteği
If you have any questions, require assistance with installation, or encounter issues not covered in this manual, please contact Diesel customer support. Visit the official Diesel webİletişim bilgileri için lütfen siteye bakın veya ürün ambalajınıza göz atın.
Daha fazla bilgi için şu adresi ziyaret edebilirsiniz: Amazon'da Diesel Mağazası.
