Legrand 138074 Manual Call Point Instruction Manual

1. Ürün Bittiview

The Legrand 138074 is a manual call point designed for fire alarm systems. It features a white housing, two contacts, and an integrated LED indicator. This device allows for manual activation of a fire alarm in emergency situations, providing a clear visual and tactile indication of activation.

Şekil 1: Ön view of the Legrand 138074 Manual Call Point.

2. Güvenlik Bilgileri

Lütfen bu cihazı kurmadan veya çalıştırmadan önce tüm güvenlik talimatlarını okuyun ve anlayın. Bu talimatlara uyulmaması maddi hasara, yaralanmaya veya ölüme neden olabilir.

• Profesyonel Kurulum: Installation must be performed by qualified personnel in accordance with all local and national electrical codes and fire safety regulations.
• Güç Bağlantısının Kesilmesi: Always disconnect power to the circuit before performing any installation, maintenance, or troubleshooting.
• CilttagKontrol edin: Güç kaynağı hacminin doğru olduğundan emin oluntage, cihazın teknik özellikleriyle uyumludur.
• Çevresel Koşullar: Do not install in areas with excessive moisture, extreme temperatures, or corrosive environments.
• Bileşen Bütünlüğü: Herhangi bir parçası hasarlı ise cihazı kullanmayınız.

3. Paket İçeriği

Paketi açtığınızda tüm bileşenlerin mevcut ve hasarsız olduğundan emin olun:

• Legrand 138074 Manual Call Point (1 unit)
• Mounting Screws (quantity as supplied)
• Kullanım Kılavuzu (bu belge)

4. Kurulum ve Kurulum

The Legrand 138074 Manual Call Point is designed for surface or flush mounting. Ensure the chosen location complies with local fire safety regulations regarding accessibility and visibility.

4.1. Montaj

1. Montaj Yüzeyini Hazırlayın: Ensure the surface is clean, dry, and flat.
2. Delme Noktalarını İşaretleyin: Use the call point's base as a template to mark the positions for mounting screws.
3. Matkap Delikleri: Drill pilot holes appropriate for the mounting screws.
4. Üssü Güvence Altına Alın: Attach the call point's base securely to the wall using the provided screws.

4.2. Kablolama

Refer to the wiring diagram below and your fire alarm control panel's documentation for correct connection. This device features 2 contacts and an LED indicator.

• Connect the alarm circuit wires to the designated terminals (typically NO/NC contacts).
• Connect the LED indicator wires to the appropriate power source and signaling circuit as per your system's requirements.
• Tüm bağlantıların güvenli ve düzgün bir şekilde yalıtıldığından emin olun.

Şekil 2: Dahili view and wiring terminals of the Legrand 138074 Manual Call Point.

4.3. Son Montaj

1. Carefully place the front cover onto the mounted base, ensuring all wires are tucked away and not pinched.
2. Secure the cover with any retaining screws or clips provided.
3. Restore power to the circuit and test the device according to your fire alarm system's testing procedures.

5. Kullanım Talimatları

In the event of a fire or other emergency requiring immediate alarm activation:

1. Locate the Call Point: Identify the nearest Legrand 138074 Manual Call Point.
2. Alarmı Etkinleştirin: Firmly press the designated activation area on the call point. This action will typically break a frangible element or activate a switch.
3. Etkinleştirmeyi Doğrulayın: The integrated LED indicator should illuminate, confirming that the call point has been activated and the signal sent to the fire alarm control panel.
4. Tahliye ediyorum: Follow your building's emergency evacuation procedures.

Note: Resetting the call point typically requires a special key or tool to return the activation mechanism to its original state after an alarm. Consult your fire alarm system administrator for reset procedures.

6. Bakım

Regular maintenance ensures the reliable operation of your manual call point.

• Görsel Muayene: Periodically inspect the call point for any signs of physical damage, tampering, or obstruction. Ensure the LED is functional during system tests.
• Temizlik: Clean the exterior of the call point with a soft, damp bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
• Fonksiyonel Test: Conduct regular functional tests as required by local fire safety regulations and your fire alarm system's maintenance schedule. This should be performed by qualified personnel.
• Bileşen Değişimi: If the frangible element is broken or the device is damaged, it must be replaced by a qualified technician.

7. Sorun Giderme

If you encounter issues with your Legrand 138074 Manual Call Point, refer to the table below. For problems not listed, contact qualified service personnel.

8. Özellikler

9. Garanti Bilgileri

Legrand products are manufactured to high standards and are typically covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and product type. Please retain your proof of purchase. For detailed warranty information, refer to the official Legrand website or contact Legrand customer support in your region.

10. Destek ve İletişim

For technical assistance, product inquiries, or to report issues, please contact Legrand customer support. You can find contact information, including phone numbers and online support portals, on the official Legrand webalan:

www.legrand.com

Destek ekibiyle iletişime geçerken lütfen ürün model numaranızı (138074) ve ilgili satın alma bilgilerinizi hazır bulundurun.