Intermatic ST01 24-Hour In-Wall Timer Instruction Manual

1. Giriş

This manual provides detailed instructions for the installation, setup, operation, and maintenance of the Intermatic ST01 24-Hour In-Wall Timer. The ST01 is a heavy-duty digital timer designed for in-wall flush mounting, suitable for controlling various electrical loads including incandescent and fluorescent lighting. Please read this manual thoroughly before installation and use to ensure safe and proper operation.

Resim 1: Ön view of the Intermatic ST01 24-Hour In-Wall Timer. This image displays the timer's digital LCD screen and control buttons, designed for flush mounting within a standard wall box.

2. Güvenlik Bilgileri

WARNING: Risk of Electric Shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. Installation should be performed by a qualified electrician or trained personnel.

• Islak elle montaj yapmayınız.
• Do not use in locations where it may be exposed to water or extreme humidity.
• Tüm kablo bağlantılarının güvenli olduğundan ve yerel elektrik yönetmeliklerine uyduğundan emin olun.
• This device is rated for 120-277V, 15A, 1800W. Do not exceed these ratings.
• Sadece iç mekanda kullanıma uygundur.

3. Paket İçeriği

Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

• Intermatic ST01 24-Hour In-Wall Timer (1 unit)
• Montaj Vidaları (2 adet)
• Kablo Somunları (3 adet)
• Kullanım Kılavuzu (Bu belge)

4. Kurulum

Güvenli ve doğru kurulum için şu adımları izleyin:

1. Gücü Kapatın: Locate the circuit breaker or fuse that supplies power to the switch box where the timer will be installed. Turn off the power completely. Verify power is off using a voltage test cihazı.
2. Mevcut Anahtarı Kaldır: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal (typically Line, Load, and Ground).
3. Wire the Timer: The ST01 timer typically has three wires:
   • Black (Line): Connect to the incoming hot wire from the circuit breaker.
   • Red (Load): Connect to the wire going to the light fixture or appliance.
   • Yeşil (Toprak): Connect to the bare copper or green ground wire in the wall box.
   Use wire nuts to secure all connections. Ensure connections are tight and no bare wire is exposed.
4. Zamanlayıcıyı monte edin: Gently fold the wires into the wall box. Insert the timer into the wall box and secure it with the provided mounting screws.
5. Duvar Plakasını Takın: Attach a standard wall plate (not included) over the timer.
6. Gücü Geri Yükle: Devre kesiciden veya sigorta kutusundan elektriği tekrar açın.

Note: The ST01 is designed for flush mounting and requires a standard electrical wall box.

5. İlk Kurulum ve Programlama

İlk güç açıldığında veya güç kapatıldıktan sonratage, the timer's internal CR2 lithium battery maintains settings, but you may need to set the current time and program schedules.

1. Geçerli Saati Ayarlayın:
   • Basın SAAT düğme.
   • Kullanın SAAT Ve DAKİKA buttons to adjust the current time. The display operates in a 12-hour format (AM/PM).
   • Basmak SAAT Kaydetmek ve çıkmak için tekrar.
2. Program ON/OFF Schedules: The ST01 allows for multiple ON/OFF programs over a 24-hour period.
   • Basın PROG button. The display will show "1 ON".
   • Kullanmak SAAT Ve DAKİKA buttons to set the desired ON time for program 1.
   • Basmak PROG Tekrar. Ekranda "1 OFF" yazısı görünecektir.
   • Kullanmak SAAT Ve DAKİKA buttons to set the desired OFF time for program 1.
   • Repeat for additional programs (e.g., "2 ON", "2 OFF", etc.) as needed.
   • Basmak SAAT to save all programs and return to normal operation.

Refer to the timer's LCD display for visual cues during programming.

6. Zamanlayıcının Çalıştırılması

Once programmed, the ST01 timer will automatically switch connected devices ON and OFF according to your set schedules. You can also manually override the timer:

• Manuel AÇIK/KAPALI: Basın KILAVUZ button to cycle through ON, OFF, and AUTO modes.
  • AÇIK: The connected device will remain ON, overriding all programs.
  • KAPALI: The connected device will remain OFF, overriding all programs.
  • OTO: The timer will operate according to the programmed schedules. This is the default operating mode.
• Random Mode (if available): Some models may include a random mode for security. Consult the specific model's features if this is desired.

7. Bakım

The Intermatic ST01 timer requires minimal maintenance:

• Temizlik: Wipe the timer's surface with a soft, damp bezle silin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
• Pil: The internal CR2 lithium battery maintains time and program settings during power outages. This battery is typically long-lasting and not user-replaceable. If the display becomes dim or settings are lost frequently, professional servicing may be required.
• Denetleme: Periodically inspect the timer and wall plate for any signs of damage or loose connections.

8. Sorun Giderme

9. Özellikler

• Modeli: ST01
• Tip: 24-Hour In-Wall Digital Timer
• Cilttage: 120 - 277V
• Ampöfke: 15A
• Güç: 1800 B
• Polonyalılar: 1
• İşlem: ON/OFF, Digital, LCD Display
• Zaman Ayarı: 12 saatlik format
• Pil: CR2 Lithium (for memory backup)
• Çalışma Sıcaklığı: 32°F ila 104°F (0°C ila 40°C)
• Montaj: Gömme montaj
• Boyutlar (Genel): 2.75" H x 1.75" W x 1.46" D (70mm H x 44mm W x 37mm D)
• Renk: Beyaz
• Malzeme: Metal
• Sertifikalar: CSA sertifikalı
• Uyumluluk: Incandescent, Fluorescent lighting
• Ürün Ağırlığı: 8 ons (yaklaşık 227 gram)

10. Garanti ve Destek

For warranty information and technical support, please contact Intermatic customer service. Keep your purchase receipt as proof of purchase.

Intermatic Müşteri Hizmetleri:

• Webalan: www.intermatic.com
• Refer to the official Intermatic webEn güncel iletişim bilgileri ve garanti detayları için lütfen siteyi ziyaret edin.