APC BX600C-IN

APC Back-UPS BX600C-IN 600VA / 360W UPS Sistemi Kullanım Kılavuzu

Model: BX600C-IN

1. Giriş

This manual provides essential instructions for the installation, operation, and maintenance of your APC Back-UPS BX600C-IN. This Uninterruptible Power Supply (UPS) system is designed to provide power backup and surge protection for home office equipment, desktop PCs, and other home electronics, ensuring continuous operation during power outages and protecting against voltage dalgalanmalar.

2. Önemli Güvenlik Bilgileri

Please read and understand these instructions carefully before installing or operating the UPS. Failure to follow these instructions can result in serious injury or equipment damage.

⚠ UYARI: ELEKTRİK ÇARPMASI RİSKİ

  • Do not remove the cover. Hazardous live parts inside this UPS are present even when the unit is disconnected from the mains.
  • Servis işlemlerini yalnızca yetkili personele yaptırın.
  • Elektrik prizinin uygun şekilde topraklandığından emin olun.
  • Do not connect non-computer related items like hair dryers, vacuum cleaners, or other high-power appliances to the battery backup outlets.

Herhangi bir bakım veya servis işlemi yapmadan önce UPS'i daima güç kaynağından ayırın.

3. Paket İçeriği

The APC Back-UPS BX600C-IN package should contain the following items:

Inspect the package upon receipt. Notify the carrier and dealer if there is any damage.

4. Ürün Bittiview

4.1. Temel Özellikler

4.2. Ön panel

Ön view of APC Back-UPS BX600C-IN showing power button and indicators

Şekil 1: Ön view of the APC Back-UPS BX600C-IN. This image displays the power button, battery indicator, and surge protection indicator on the front panel.

4.3. Arka Panel

Arka view of APC Back-UPS BX600C-IN showing power outlets and input

Şekil 2: Arka view of the APC Back-UPS BX600C-IN. This image shows the three battery backup and surge protected outlets, the input power cord, and ventilation grilles.

5. Kurulum Talimatları

  1. Atama: Place the UPS in a cool, dry location, away from direct sunlight, excessive heat, or moisture. Ensure adequate ventilation around the unit.
  2. İlk Pil Şarjı: Connect the UPS to a grounded wall outlet using the attached power cord. Allow the unit to charge for at least 8 hours before connecting any equipment. This ensures optimal battery runtime.
  3. Ekipmanı Bağlayın:
    • Connect your computer, monitor, and other critical devices (e.g., Wi-Fi router, modem) to the Pil Yedekleme ve Aşırı Gerilim Korumalı Çıkışlar on the rear of the UPS.
    • Do not overload the UPS. The total wattage of connected equipment should not exceed 360 Watts.
  4. Güç Açık: Press the power button on the front panel to turn on the UPS. The power indicator will illuminate.

Cihazlarınızı çalıştırmadan önce tüm bağlantıların güvenli olduğundan emin olun.

6. Kullanım Talimatları

6.1. UPS'i Açma/Kapatma

6.2. Understanding Indicators and Alarms

UPS Status Indicators
Indicator/AlarmTanım
Power Indicator (Green LED) OnUPS is providing power to connected equipment.
Power Indicator (Green LED) FlashingUPS akü gücüyle çalışıyor.
Audible Alarm (Beeping)Indicates the UPS is operating on battery power. Beeps more frequently as battery charge depletes.
Continuous Alarm / Red IndicatorIndicates low battery, overload, or a fault condition.
Surge Protection Indicator OnSurge protection is active and functioning.

6.3. Otomatik Sestage Yönetmelik (AVR)

UPS, küçük voltaj dalgalanmalarını otomatik olarak düzeltir.tage fluctuations (sags and surges) without switching to battery power, extending battery life. If the voltage fluctuation is too severe or prolonged, the UPS will switch to battery power.

6.4. Cold Start Function

The cold start feature allows you to power on the UPS and connected equipment using only battery power, even if there is no utility power available. To perform a cold start, ensure the UPS is off, then press and hold the power button until the unit powers on.

7. Bakım

7.1. Pil Bakımı ve Değiştirilmesi

The UPS contains a sealed, maintenance-free lead-acid battery. The battery is designed for a service life of 3-5 years under normal operating conditions. Factors like frequent power outages, high temperatures, and deep discharges can reduce battery life.

7.2. Temizlik

UPS'in dış yüzeyini periyodik olarak yumuşak, kuru bir bezle temizleyin. Sıvı veya aerosol temizleyiciler kullanmayın. Havalandırma açıklıklarının toz ve kirden arındırılmış olduğundan emin olun.

8. Sorun Giderme

This section provides solutions to common issues you might encounter with your UPS. If the problem persists, contact APC customer support.

Sorun giderme kılavuzu
SorunOlası NedenÇözüm
UPS açılmıyor.
  • Not connected to utility power.
  • Pil şarjlı değil.
  • Arızalı pil.
  • Ensure the UPS is securely plugged into a grounded wall outlet.
  • Allow the UPS to charge for at least 8 hours.
  • Contact APC support for battery replacement if necessary.
UPS cihazı sık sık veya sürekli olarak bip sesi çıkarıyor.
  • Pil gücüyle çalışıyor.
  • Pil zayıf.
  • Aşırı yük durumu.
  • Check utility power. Save work and shut down equipment if power outage persists.
  • Allow battery to recharge.
  • Disconnect non-essential equipment from battery backup outlets. Reduce total load to below 360W.
Kısa yedekleme süresi.
  • Pil tam şarjlı değil.
  • Pil ömrünün sonuna yaklaşıyor.
  • Aşırı yük.
  • Ensure UPS is fully charged before use.
  • Consider battery replacement by qualified personnel.
  • Bağlantılı yükü azaltın.
UPS makes chattering noises.
  • Fluctuating input power (AVR engaging).
  • Loose internal components (rare).
  • This is normal operation for AVR.
  • If persistent and loud, contact APC support.

9. Teknik Özellikler

APC Back-UPS BX600C-IN Specifications
ÖzellikDetay
ÖrnekBX600C-IN
Kapasite600VA / 360W
Giriş Voltage Aralık145-290V AC
Çıkış Hacmitage230V AC
Çıkış Frekansı47 - 63 Hz (Sync to mains)
Transfer Süresi10 ms tipik, 12 ms maksimum
Pil Türü1 x 12V, 7.2Ah Sealed Lead-Acid
Tipik Şarj Süresi4-6 saat
Backup Time (Typical)20 - 75 minutes (load dependent)
Çıkışlar3 x 6A, 2/3 Pin Indian Sockets (Battery Backup & Surge Protected)
Boyutlar (Y x G x D)23.7x10.7x21.8 cm
Ağırlık4.69 kilo
Çalışma Sıcaklığı0°C ila 40°C (32°F ila 104°F)

10. Garanti ve Destek

APC provides a comprehensive warranty for this product.

Lütfen garanti amaçlı satın alma belgenizi saklayın.

İlgili Belgeler - BX600C-IN

Önview APC Back-UPS Kullanım Kılavuzu: 250-1250 Modelleri
APC Back-UPS kesintisiz güç kaynağı modelleri 250, 400, 450, 600, 900 ve 1250 için kapsamlı kullanım kılavuzu. Güvenlik, kurulum, çalıştırma, sorun giderme ve teknik özellikler konularını kapsar.
Önview APC Back-UPS ES 400/550/700 Kullanım Kılavuzu ve Teknik Özellikleri
APC Back-UPS ES 400, 550 ve 700 serisi kesintisiz güç kaynakları (UPS) için kurulum, bağlantı, çalıştırma, sorun giderme, teknik özellikler ve garanti konularını kapsayan kullanıcı kılavuzu.
Önview APC Back-UPS BN600G Kullanım Kılavuzu
APC Back-UPS BN600G Kesintisiz Güç Kaynağı (UPS) için güvenlik bilgileri, teknik özellikler, kurulum, çalıştırma, sorun giderme ve garanti detaylarını içeren kullanım kılavuzu.
Önview APC Back-UPS Pro 1200/1500 230V Kurulum ve Kullanım Kılavuzu
APC Back-UPS Pro 1200/1500 230V'nin kurulumu ve çalıştırılması için kapsamlı kılavuz. Güvenlik, kurulum, yazılım yükleme, çalıştırma, sorun giderme, teknik özellikler ve garanti konularını kapsar.
Önview APC Back-UPS Pro 900 Kurulum ve Kullanım Kılavuzu
Bu kılavuz, APC Back-UPS Pro 900'ün kurulumu ve çalıştırılmasıyla ilgili talimatlar sunmaktadır; bunlar arasında kurulum, yazılım yükleme, ekipman bağlantısı, güç tasarrufu ve ekran modları gibi işletim özellikleri, sorun giderme ve teknik özellikler yer almaktadır.
Önview APC Back-UPS BR1000G-IN / BR1500G-IN: Kurulum ve Kullanım Kılavuzu
APC Back-UPS BR1000G-IN ve BR1500G-IN Kesintisiz Güç Kaynağı (UPS) kurulumu ve çalıştırılmasına ilişkin kapsamlı kılavuz; teknik özellikler, bağlantılar, özellikler, sorun giderme ve servis konularını kapsamaktadır.