TOPGREENER TSOS5-W In-Wall PIR Motion Sensor Light Switch User Manual

1. Giriş

The TOPGREENER TSOS5-W is an in-wall Passive Infrared (PIR) motion sensor light switch designed to automatically control lighting, fans, and motors based on occupancy detection. This single-pole switch requires a neutral wire for proper operation and offers AUTO, ON, and OFF modes for flexible control. It is suitable for various indoor applications, providing convenience and energy savings.

2. Önemli Güvenlik Bilgileri

UYARI: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse and test that the power is off before wiring. Installation should be performed by a qualified electrician or a person with electrical knowledge.

• This device requires a neutral wire for installation. Verify the presence of a neutral wire in your electrical box before proceeding.
• For single-pole use only. Do not use in 3-way or multi-way switch configurations.
• Do not exceed the maximum load ratings: CFL/LED: 150W; Incandescent/Halogen: 500W; Motor: 1/8 HP; Fluorescent 500VA.
• Tüm kablo bağlantılarının güvenli ve düzgün bir şekilde yalıtıldığından emin olun.
• Sadece iç mekanda kullanılabilir.

3. Paket İçeriği

• TOPGREENER TSOS5-W Motion Sensor Switch
• Tel Somunlar
• Kullanım Kılavuzu

Note: Wall plate sold separately.

4. Ürün Özellikleri

5. Kurulum Talimatları

Başlamadan Önce: Ensure power is OFF at the circuit breaker. This device requires a neutral wire. If you are unsure about your wiring, consult a qualified electrician.

5.1 Kablolama Şeması

The TSOS5-W switch has four wires for connection: Line (Hot), Load, Neutral, and Ground.

• Siyah Tel: Connects to the Line (Hot) wire from the electrical box.
• Kırmızı Tel: Connects to the Load wire (to the light fixture/fan).
• Beyaz Tel: Connects to the Neutral wire from the electrical box.
• Yeşil Tel: Connects to the Ground wire from the electrical box.

Şekil 1: Ön view of the TOPGREENER TSOS5-W motion sensor switch, showing the sensor lens and the OFF-AUTO-ON slider.

Figure 2: Internal components of the TSOS5-W, illustrating the PIR sensor, customizable controls, and safety features.

5.2 Adım Adım Kurulum

1. Gücü Kapatın: Locate the circuit breaker that controls the power to the switch box and turn it OFF. Verify power is off using a voltage test cihazı.
2. Eski Anahtarı Kaldır: Mevcut duvar plakasını ve şalteri elektrik kutusundan dikkatlice çıkarın. Eski şalterden kabloları ayırın.
3. Kabloları Tanımlayın: Identify the Line (Hot), Load, Neutral, and Ground wires in your electrical box. The neutral wire is typically white. If you are unsure, consult a qualified electrician.
4. Kabloları Bağlayın: Using the provided wire nuts, connect the wires from the TSOS5-W switch to the corresponding wires in the electrical box:
   • Black switch wire to Line (Hot) wire.
   • Red switch wire to Load wire.
   • White switch wire to Neutral wire.
   • Green switch wire to Ground wire.
5. Montaj Anahtarı: Carefully fold the wires into the electrical box and secure the TSOS5-W switch to the box using the mounting screws.
6. Duvar Plakasını Takın: (Ayrı olarak satılan) duvar plakasını şalterin üzerine takın.
7. Gücü Geri Yükle: Devre kesiciden gücü tekrar AÇIN.

6. Operasyon

The TSOS5-W features a slider switch for mode selection and adjustable dials for sensitivity and time delay, located behind the faceplate.

6.1 Mod Seçimi

Figure 3: The OFF-AUTO-ON slider switch for mode selection.

• AUTO Mode (Occupancy Sensor): In this mode, the switch automatically turns lights ON when motion is detected and OFF after a set time delay when no motion is detected. This is the primary energy-saving mode.
• AÇIK Modu: This mode overrides the sensor, keeping the lights ON continuously, similar to a standard light switch.
• Kapalı mod: This mode overrides the sensor, keeping the lights OFF continuously, similar to a standard light switch.

6.2 Adjusting Settings (Behind Faceplate)

To access the adjustment dials, carefully remove the faceplate of the switch. You will find dials for Time Delay and Sensitivity.

• Zaman Gecikmesi: This setting determines how long the lights remain ON after the last detected motion. Adjustable options include 15 seconds (test mode), 10 minutes, 20 minutes, and 30 minutes. Rotate the dial to select the desired delay.
• Hassasiyet: This setting controls the sensor's responsiveness to motion. It can be adjusted from 30% to 100%. A higher sensitivity setting will detect smaller movements or movements at a greater distance. Rotate the dial to adjust.

Figure 4: The TSOS5-W in an occupancy sensing application, providing hands-free lighting control.

7. Sorun Giderme

8. Bakım

• Clean the sensor lens periodically with a soft, dry cloth to ensure optimal performance. Avoid using abrasive cleaners.
• Do not paint over the sensor lens.
• No user-serviceable parts inside. Do not attempt to disassemble the unit.

9. Garanti ve Destek

TOPGREENER products are designed for reliability and performance. For warranty information or technical support, please contact TOPGREENER customer service. Refer to the product packaging or the official TOPGREENER webiletişim bilgileri için site.

Üretici: Top Greener Inc