giriiş
The Polk Audio T50 Floor Standing Tower Speaker is engineered to deliver powerful, high-performance sound for both home theater and stereo applications. Featuring Polk's Dynamic Balance technology, a 1-inch silk dome tweeter, a 6.25-inch composite driver, and two front-firing sub-bass radiators, the T50 provides crisp highs, detailed mids, and deep, impactful bass. It is designed to integrate seamlessly into most home theater receivers and stereos, supporting Dolby and DTS for an immersive audio experience.
Kutuda Neler Var?
- 1 x Polk Audio T50 Tower Speaker
- 1 x Speaker Grille
- Garanti Kayıt Kartı
Kurmak
Setting up your Polk Audio T50 Tower Speaker is designed to be straightforward. Follow these steps for optimal performance:
- Atama: Position the tower speakers in your listening area, ensuring they are equidistant from your primary listening position for a balanced soundstage. For home theater setups, place them to the left and right of your television or projection screen.
- Bağlantılar: Connect the speaker wire from your AV receiver or stereo amplifier to the 5-way binding posts on the back of the T50 speaker. Ensure correct polarity (positive to positive, negative to negative) for optimal sound reproduction.
- Izgara Eklentisi: The speaker grille can be attached magnetically to the front of the speaker for protection and aesthetic preference.
- Sistem Entegrasyonu: The T50 speakers are timbre-matched with other Polk T-Series speakers, allowing for seamless integration into a larger surround sound system (e.g., with T15 surrounds and a T30 center channel).
Şekil 1: Arka view of the Polk Audio T50 speaker showing the 5-way binding posts for easy and secure wire hookup.
Şekil 2: Ör.ample placement of two Polk Audio T50 tower speakers in a home theater setup, demonstrating seamless sound integration.
Video 1: Bir overview of the Polk T-Series speakers, highlighting their design and features for home audio setups.
İşletim
Once properly connected, your Polk Audio T50 speakers will operate in conjunction with your audio receiver or amplifier. Ensure your receiver is powered on and set to the correct input source. Adjust volume levels on your receiver. The T50 speakers are designed to reproduce a wide range of frequencies, providing clear audio for movies, music, and games.
Figure 3: The Polk Audio T50 speaker integrated into a home audio environment, ready for use.
Bakım
To ensure the longevity and optimal performance of your Polk Audio T50 speakers, follow these simple maintenance guidelines:
- Temizlik: Gently wipe the speaker cabinets with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
- Izgara Bakımı: The speaker grilles can be carefully removed and dusted. If necessary, they can be gently vacuumed with a soft brush attachment.
- Çevre: Place speakers in a stable location away from direct sunlight, excessive heat, moisture, or extreme temperature changes. Ensure adequate ventilation around the speakers.
- Bağlantılar: Periodically check speaker wire connections to ensure they are secure and free from corrosion.
Sorun giderme
If you encounter issues with your Polk Audio T50 speakers, consider the following common troubleshooting steps:
- Ses Yok:
- Verify that your AV receiver or ampAmplifikatör açık ve doğru giriş kaynağı seçilmiş durumda.
- Check all speaker wire connections at both the speaker and the receiver for proper polarity and secure contact.
- Ensure the volume on your receiver is not muted or set too low.
- Bozuk Ses:
- Reduce the volume level on your receiver.
- Check speaker wire connections for any loose strands that might be touching each other or the wrong terminal.
- Ensure your receiver's impedance settings match the speaker's impedance (6 Ohms).
- Düzensiz Ses:
- Her iki hoparlörün de doğru kutuplarla bağlı olduğundan emin olun.
- Check speaker placement to ensure they are symmetrically positioned relative to your listening area.
- Adjust the balance settings on your AV receiver.
Özellikler
| Özellik | Şartname |
|---|---|
| Montaj Tipi | Ayakta |
| Malzeme | Odun |
| Model Adı | T50 |
| Hoparlör Tipi | Kule |
| Özel Özellik | Hi-Res Audio, Multi-Room Audio |
| Önerilen Kullanımlar | Surround Ses Sistemleri için |
| Uyumlu Cihazlar | Most Home Theater AV Receivers |
| Subwoofer Çapı | 6.5 inç |
| Birim Sayısı | 1.0 Sayım |
| Çevresel Ses Kanalı Yapılandırması | 2.1, 5.1 |
| Renk | Siyah |
| Ürün Boyutları | 7.75"D x 8.75"G x 36.25"Y |
| Ürün Ağırlığı | 20.35 Pound |
| Empedans | 6 Ohm |
| Maksimum Menzil | 7 Metre |
| Kontrol Yöntemi | Dokunmak |
| Hoparlör Boyutu | 6.5 inç |
| Güç Kaynağı | Kablolu Elektrik |
| Woofer Çapı | 6 inç |
| Tweeter Çapı | 1 inç |
| Ses Sürücüsü Türü | Dinamik Sürücü |
| Ses Sürücüsü Boyutu | 6.25 inç |
| Hoparlör Maksimum Çıkış Gücü | 150 Watt |
| Frekans Tepkisi | 24000 Hz |
| Bağlantı Teknolojisi | Kablolu |
| Ses Çıkışı Modu | Çevrelemek |
Figure 4: Detailed dimensions of the Polk Audio T50 Floor Standing Tower Speaker.
Garanti
The Polk Audio T50 Floor Standing Tower Speaker comes with a Full Warranty. Please refer to the included Warranty Registration Card for specific terms, conditions, and registration details. Retain your proof of purchase for any warranty claims.
Destek
For further assistance, technical support, or service inquiries regarding your Polk Audio T50 speakers, please visit the official Polk Audio website or contact their customer service department. You can find contact information on the Warranty Registration Card or the brand's official webalan.
