giriiş
The Extech MF100 is a versatile AC/DC Magnetic Field Meter designed for accurate measurement of magnetic fields. It incorporates a Hall effect sensor with automatic temperature compensation, ensuring reliable readings across various environmental conditions. This device is suitable for a range of applications requiring precise magnetic field analysis.
Figure 1: The Extech MF100 AC/DC Magnetic Field Meter, showing the main unit connected to its uniaxial magnetic probe sensor.
Özellikler
- Utilizes Hall effect sensor with Automatic Temperature Compensation (ATC)
- N pole/S pole indicator for magnetic field direction
- Zero button for accurate DC measurement
- Data Hold function to freeze readings
- Min/Max recording for capturing extreme values
- Auto power off with disable feature to conserve battery life
Paket İçeriği
Paketi açtıktan sonra, tüm ürünlerin eksiksiz ve hasarsız olduğundan emin olun:
- Extech MF100 AC/DC Magnetic Field Meter
- Uniaxial Magnetic Probe Sensor
- Protective Cover for the probe
- 9V Pil (dahil)
- Sert Taşıma Çantası
Güvenlik Bilgileri
Please read and understand all safety precautions before operating the Extech MF100. Failure to follow these instructions may result in injury or damage to the device.
- Do not attempt to open the meter casing. Servis işlemleri yalnızca kalifiye personel tarafından yapılmalıdır.
- Keep the device away from strong electromagnetic fields that are not being measured, as this may affect accuracy.
- Kullanmadan önce pil bölmesinin iyice kapalı olduğundan emin olun.
- Pilleri yerel düzenlemelere göre atın.
- Avoid dropping the meter or subjecting it to severe impact.
Kurmak
- Pil Montajı: Open the battery compartment cover on the back of the meter. Insert the included 9V battery, observing the correct polarity. Close the cover securely.
- Prob Bağlantısı: Connect the uniaxial magnetic probe sensor cable to the input jack located at the top of the MF100 meter. Ensure the connection is firm.
- Koruyucu Kılıf: Place the protective cover over the probe tip when not in use to prevent damage.
Kullanım Talimatları
This section details the basic operation of the Extech MF100.
- Güç Açma/Kapatma: Basın GÜÇ button to turn the meter on or off. The display will illuminate.
- Selecting AC/DC Mode: Basın MODE DC/AC button to toggle between AC (alternating current) and DC (direct current) magnetic field measurement modes. The selected mode will be indicated on the display.
- Zeroing for DC Measurement: Before taking DC measurements, press the SIFIR button to calibrate the meter and eliminate any residual magnetic fields. This ensures accurate DC readings.
- Ölçümlerin Alınması: Position the tip of the uniaxial magnetic probe sensor in the magnetic field you wish to measure. The reading will be displayed on the LCD. The N pole/S pole indicator will show the direction of the magnetic field.
- Veri tutma: Basın TUTMAK Ekrandaki mevcut okumayı dondurmak için düğmeye basın. Tekrar basarak bırakın.
- Min/Max Recording: Basın KAYIT button once to enter Min/Max recording mode. The meter will continuously record the minimum and maximum values. Press KAYIT again to cycle through Min, Max, and current readings. Press and hold KAYIT to exit Min/Max mode.
- Otomatik Kapanma: The meter will automatically power off after a period of inactivity to conserve battery. To disable this feature, refer to the full manual for specific button sequences during power-on.
Figure 2: The Extech MF100 being used by a technician to measure a magnetic field in a laboratory environment.
Figure 3: The Extech MF100 in use outdoors, demonstrating its portability and application in various field conditions.
Bakım
- Temizlik: Wipe the meter and probe with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Pil Değişimi: When the low battery indicator appears on the display, replace the 9V battery promptly to ensure accurate operation.
- Depolamak: Store the meter in its hard carrying case in a cool, dry place when not in use. Remove the battery if storing for extended periods to prevent leakage.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Sayaç açılmıyor | Bitmiş veya yanlış takılmış pil | Replace battery, check polarity |
| Inaccurate DC readings | Not zeroed before measurement | Press the ZERO button before taking DC measurements |
| düzensiz okumalar | Interference from other magnetic sources; damaged probe | Move away from other sources; inspect probe for damage |
Özellikler
| Şartname | Değer |
|---|---|
| Model Numarası | MF100 |
| Ürün Boyutları (U x G x Y) | 7.8 x 2.7 x 1.2 inç |
| Ürün Ağırlığı | 0.27 Kilogram (9.52 ons) |
| Güç Kaynağı | Pil ile çalışır (2 Lityum İyon pil gereklidir, dahildir) |
| Sensör Tipi | Hall Effect with ATC |
| İlk Mevcut Tarih | 30 Haziran 2015 |
Garanti ve Destek
Warranty information for the Extech MF100 is typically provided with the product packaging or can be found on the official Extech website. For technical support, service, or to inquire about replacement parts, please visit the Extech Mağazası Amazon'da veya üreticinin resmi webalan.
