1. Giriş
Thank you for choosing the Aqualux Pool Blaster Max Li. This cordless electric vacuum cleaner is designed for efficient and convenient cleaning of pools and spas. Its powerful suction and battery operation allow for thorough cleaning without the need for hoses or external power sources. Please read this manual carefully before operating the device to ensure proper use and maintenance.
2. Güvenlik Bilgileri
- Always disconnect the charger from the unit before use or maintenance.
- Do not operate the vacuum out of water. The motor is designed for underwater use and requires water for cooling.
- Ellerinizi, saçlarınızı ve bol giysilerinizi hareketli parçalardan uzak tutun.
- Do not allow children to operate this device. Adult supervision is required.
- Use only the charger supplied with the unit.
- Kullanılmadığı zaman üniteyi serin ve kuru bir yerde saklayın.
- Do not attempt to open or repair the battery pack or motor housing. Refer all servicing to qualified personnel.
3. Paket İçeriği
Paketin içinde tüm öğelerin mevcut olduğundan emin olun:
- Pool Blaster Max Li Vacuum Unit
- Rechargeable Lithium-Ion Battery (integrated)
- Pil Şarj Cihazı
- Reusable Filter Bag
- Adjustable Wide Head
- Pole Adapter (for standard telescopic poles)
4. Ürün Bittiview
Familiarize yourself with the main components of your Pool Blaster Max Li.
Figure 4.1: The Aqualux Pool Blaster Max Li cordless vacuum cleaner, showing its ergonomic design and attachment points.
The unit consists of the main body housing the motor and battery, a removable filter bag compartment, and an adjustable wide head for efficient debris collection. The charging port is located on the main body.
5. Kurulum ve Şarj
5.1. Pilin Şarj Edilmesi
Before first use, fully charge the battery. The charging port is designed for secure connection.
Figure 5.1: Detail of the charging port on the vacuum unit.
Figure 5.2: Connecting the charger to the Pool Blaster Max Li. Ensure a firm connection.
- Elektrikli süpürgenin şarj portunu bulun.
- Connect the charger cable to the port.
- Şarj cihazını standart bir elektrik prizine takın.
- Allow 8-10 hours for a full charge. The indicator light on the charger will change when charging is complete (refer to charger instructions for specific light behavior).
5.2. Montaj
- Insert the reusable filter bag into its designated compartment. Ensure it is securely seated.
- Attach the adjustable wide head to the front of the vacuum unit. It should click into place.
- If using with a telescopic pole, attach the pole adapter to the vacuum unit, then slide your standard telescopic pole into the adapter.
6. Operasyon
The Pool Blaster Max Li is designed for easy underwater operation.
Figure 6.1: The vacuum unit submerged and actively cleaning the pool floor.
Figure 6.2: The vacuum effectively collecting various debris from the pool bottom.
Figure 6.3: The vacuum in operation, demonstrating the water flow and suction capability.
- Pilin tamamen şarj olduğundan emin olun.
- Submerge the vacuum unit completely in the water. Ensure no air is trapped inside.
- Turn on the unit using the power switch (location may vary, typically near the handle).
- Slowly guide the vacuum across the pool or spa surfaces you wish to clean. Overlap passes to ensure complete coverage.
- The vacuum will collect debris into the filter bag. Monitor the suction power; if it decreases, the filter bag may need emptying.
- After cleaning, turn off the unit before removing it from the water.
- Remove the unit from the water and immediately proceed to maintenance.
7. Bakım
Regular maintenance ensures optimal performance and extends the life of your Pool Blaster Max Li.
7.1. Cleaning the Filter Bag
The filter bag should be cleaned after each use or when suction power diminishes.
- Remove the filter bag from the vacuum unit.
- Empty collected debris into a waste receptacle.
- Rinse the filter bag thoroughly with a garden hose or under a faucet until clean.
- Allow the filter bag to air dry completely before storing or reinserting.
7.2. Unit Cleaning and Storage
- Rinse the exterior of the vacuum unit with fresh water after each use.
- Wipe down the unit with a soft cloth.
- Ensure the unit is completely dry before charging or storing.
- Store the vacuum in a cool, dry place, away from direct sunlight and extreme temperatures.
- Recharge the battery regularly, even during periods of non-use, to maintain battery health.
8. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Vakum açılmıyor. | Pil şarj olmuyor. | Pili 8-10 saat şarj edin. |
| Güç anahtarı kapalı. | Güç anahtarının 'AÇIK' konumunda olduğundan emin olun. | |
| Düşük emiş gücü. | Filter bag is full or clogged. | Empty and clean the filter bag thoroughly. |
| Debris lodged in suction intake. | Turn off the unit and remove any obstructions from the intake. | |
| Pil şarjı düşük. | Pili şarj edin. | |
| Ünite çalışırken duruyor. | Pil bitmiş. | Pili şarj edin. |
| Aşırı ısınma koruması aktif. | Turn off the unit, remove from water, and allow it to cool down for 30 minutes before restarting. Ensure it is fully submerged during operation. |
9. Teknik Özellikler
- Modeli: NE4382
- Marka: Aqualux
- Güç Kaynağı: Pil ile çalışır
- Pil Tipi: Lityum-İyon
- Pil Hacmitage: 18 Volt
- Çalışma Süresi: Up to 1 hour (on full charge)
- Şarj Süresi: 8-10 saat
- Temizleme Yüzey Alanı: Approximately 164.5 m³/h
- Ürün Ağırlığı: 3.2 Kilogram
- Boyutlar (U x G x Y): 45.97 cm x 27.18 cm x 20.57 cm
- Suction Head Width: 27.3 cm
- Minimum Su Derinliği: 40 cm
- Malzeme: Plastik
- Renk: Mavi
- UPC: 894331001016
10. Garanti ve Müşteri Desteği
For warranty information or customer support, please refer to the documentation provided with your purchase or contact Aqualux customer service through their official webÜrünü web sitesinden veya yetkili satıcılardan temin edebilirsiniz. Garanti talepleri için satın alma belgenizi saklayın.
