Lepro N4100057-WW-2

Lepro 12V LED Strip Light User Manual

Model: N4100057-WW-2

1. Ürün Bittiview

The Lepro 12V LED Strip Light provides flexible, warm white illumination for various indoor applications. This non-waterproof strip features SMD 2835 LEDs, offering high brightness and low power consumption. It is designed for easy installation with a self-adhesive backing and can be cut and reconnected to fit specific lengths.

Paket İçeriği

  • 2 x Lepro 12V LED Strip Lights (32.8 ft each)
  • Kullanıcı Kılavuzu

Note: A 12V power adapter is not included and must be purchased separately.

Lepro LED Strip Light package contents including two reels of LED strips and a user manual.

Image 1.1: Contents of the Lepro LED Strip Light package, showing two reels of LED strips and the instruction manual.

2. Güvenlik Yönergeleri

Kurulum ve kullanımdan önce lütfen tüm güvenlik talimatlarını okuyun ve anlayın. Bu talimatlara uyulmaması elektrik çarpmasına, yangına veya diğer tehlikelere neden olabilir.

  • Güç Kaynağı: Only use a 12V DC power adapter. Do not use power adapters higher than 12V, as this will damage the LED strip and pose a safety risk. Ensure the total wattage of the LED strip lights does not exceed the maximum wattage of your power adapter.
  • Sadece İç Mekanda Kullanım: This product is non-waterproof and designed for indoor use only. Avoid exposure to water, moisture, or high humidity.
  • Kurulum Yüzeyi: Ensure the installation surface is clean, dry, and smooth to ensure proper adhesion.
  • Kesme: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the circuit and render that section unusable.
  • Sıcaklık: While LED strips generate minimal heat, ensure proper ventilation around the installed strip. Do not cover the strip with materials that could trap heat.
  • Çocuklar: Çalışma hacmitage is 12V DC, making it safe to touch. However, keep small components and packaging materials away from children.

3. Kurulum ve Kurulum

3.1 Kurulumdan Önce

  1. Düzeninizi Planlayın: Determine the desired path for your LED strip. Measure the length required.
  2. Yüzeyi Temizleyin: Thoroughly clean the installation surface with a dry cloth to remove dust, dirt, or oil. A clean surface ensures optimal adhesion of the self-adhesive backing.
  3. Test the Strip: Before permanent installation, connect the LED strip to a 12V power adapter to ensure it functions correctly.

3.2 Connecting the Strip Light

The LED strip requires a 12V DC power adapter (not included) for operation. Ensure the power adapter's connector matches the strip's connector.

  1. Locate the DC input connector on the LED strip.
  2. Connect the output plug of your 12V DC power adapter to the strip's input connector. Ensure a secure connection.
  3. Güç adaptörünü standart bir duvar prizine takın.
Diagram showing how to connect the 12V LED strip light to a power adapter.

Image 3.1: Connection diagram illustrating how to connect the LED strip to a 12V power supply. The power adapter is sold separately.

3.3 Mounting the Strip Light

The LED strip features a self-adhesive backing for easy mounting. If you need to adjust the length, the strip can be cut at specific points.

  1. Prepare for Adhesion: Peel off a small section of the protective film from the self-adhesive backing at one end of the strip.
  2. Şeridi uygulayın: Carefully press the exposed adhesive section onto your cleaned surface. Gradually peel off more of the protective film while pressing the strip firmly along your desired path.
  3. Kesme (gerekirse): If the strip is too long, locate the designated cut marks, typically indicated by a copper pad and a scissor icon. Use sharp scissors to cut precisely along this line. The strip can be cut every 3 LEDs (approximately 2 inches).
  4. Reconnection (optional): If you cut the strip and wish to reconnect sections or connect to other accessories, 2-pin 8mm connectors (not included) are required.
Three images demonstrating the installation process: cleaning the surface, peeling the adhesive, and cutting the LED strip at marked intervals.

Image 3.2: Step-by-step installation guide showing surface preparation, adhesive application, and how to cut the LED strip at designated marks.

4. Kullanım Talimatları

Operating the Lepro 12V LED Strip Light is straightforward once installed:

  • Güç Açma/Kapatma: Connect the 12V DC power adapter to a power outlet to turn the lights on. Disconnect or use a switch on your power adapter (if available) to turn them off.
  • Parlaklık: This specific model of LED strip light is kısılabilir değil. It operates at a fixed brightness when powered on.

5. Bakım ve Onarım

Proper care ensures the longevity and performance of your LED strip lights:

  • Temizlik: If cleaning is necessary, ensure the power is disconnected. Gently wipe the strip with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Depolamak: If removing the strip for storage, carefully peel it off the surface. Roll it loosely back onto its original reel or a similar spool to prevent kinking or damage. Store in a cool, dry place.
  • Keskin Bükülmelerden Kaçının: Do not bend the LED strip at sharp angles, as this can damage the internal circuitry.

6. Sorun Giderme

If you encounter issues with your Lepro LED Strip Light, refer to the following table for common problems and solutions:

SorunOlası NedenÇözüm
LED şerit yanmıyor.
  • Adaptöre elektrik gelmiyor.
  • Bağlantı koptu.
  • Arızalı güç adaptörü.
  • Yanlış cilttage güç adaptörü.
  • Damaged LED strip.
  • Elektrik prizinin çalışıp çalışmadığını kontrol edin.
  • Tüm bağlantıların güvenli olduğundan emin olun.
  • Test the power adapter with another device if possible.
  • Verify the power adapter is 12V DC.
  • Inspect the strip for visible damage, especially at cut points or bends.
Part of the LED strip is not lighting up.
  • Damage to a section of the strip.
  • Improper cut.
  • Inspect the non-working section for physical damage or a faulty connection if it was cut and reconnected.
  • Ensure cuts were made precisely on the designated cut marks.
Adhesive is not sticking.
  • Surface is not clean or smooth.
  • Adhesive has lost its tackiness.
  • Ensure the surface is thoroughly cleaned and dry before application.
  • For persistent issues, consider using additional mounting clips or a stronger adhesive (e.g., hot glue, ensuring it does not damage the strip).

7. Ürün Özellikleri

ÖzellikŞartname
MarkaCüzzam
Model NumarasıN4100057-WW-2
Açık RenkSıcak Beyaz
Renk Sıcaklığı3000 Kelvin
Işık Kaynağı TürüLED (SMD 2835)
LED sayısı300 per 32.8 ft strip (600 total for 2-pack)
Uzunluk32.8 ft (per strip)
Cilttage12 Volt Doğru Akım
Netage18 watts (per strip)
Parlaklık92 lm/ft (1200 Lumens total per strip)
Özel ÖzellikKısılabilir değil
İç/Dış Mekan KullanımıSadece İç Mekanda Kullanılabilir
MalzemeBakır, Plastik
Montaj TipiKendiliğinden yapışkanlı
KesilebilirEvery 3 LEDs (approx. 2 inches)
Ürün Ağırlığı3.53 ons (100 Gram)

8. Garanti ve Müşteri Desteği

Lepro products are manufactured with quality and reliability in mind. For specific warranty information, please refer to the documentation included with your purchase or visit the official Lepro website. If you have any questions, require technical assistance, or need to report an issue, please contact Lepro customer support through their official channels.

You can often find support contact information on the product packaging or by visiting the Lepro brand store on Amazon: Lepro Amazon Store.

İlgili Belgeler - N4100057-WW-2

Önview Lepro LED Tavan Lambası Kullanım Kılavuzu: Kurulum ve Özellikler
Lepro LED Tavan Lambaları için detaylı kullanım kılavuzu; PR1500024 ve PR1500035 serisi modellerin özelliklerini, kurulum talimatlarını, güvenlik bilgilerini ve boyutlarını içermektedir.
Önview Lepro LED Tavan Lambası Kullanım Kılavuzu ve Kurulum Talimatları
Lepro LED Tavan Lambaları için kapsamlı kullanım kılavuzu; PR150003, PR150004 ve PR150005 modelleri için kurulum talimatları, güvenlik önlemleri, model özellikleri ve paket içeriğini içermektedir.
Önview Lepro LED Light Strip User Manual and Specifications
User manual for Lepro LED Light Strips (Model PR4100067 series). Includes installation, safety, specifications, and disposal information.
Önview Lepro P1 Smart Plug User Guide and Specifications
Comprehensive guide for the Lepro P1 Smart Plug, covering setup, features, safety warnings, and compliance information for Wi-Fi and voice control integration.
Önview Lepro LED Faramp Kullanım Kılavuzu ve Güvenlik Kılavuzu
Lepro LED Headl için kapsamlı kullanıcı kılavuzuamp (Model 3200008 serisi) özellikleri, kullanım talimatları, güvenlik önlemleri ve iletişim bilgileri dahil.
Önview Lepro S1 Akıllı LED Şerit Işıkları Kullanım Kılavuzu
Lepro S1 Akıllı LED Şerit Işıkları (Model: 2A3MAS1) için kurulum, çalıştırma ve özellikleri ayrıntılı olarak açıklayan kapsamlı kullanıcı kılavuzu.