1. Giriş
This manual provides essential instructions for the safe and proper installation, operation, and maintenance of your KanexPro Full-Motion Tilt/Swivel TV Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. Incorrect installation may result in product damage or personal injury.
Güvenlik Bilgileri
- Montaj yüzeyinin, montaj aparatı ve televizyonun toplam ağırlığını güvenli bir şekilde taşıyabileceğinden emin olun.
- 66 lbs (30 kg) maksimum ağırlık kapasitesini aşmayın.
- Always use appropriate safety equipment during installation.
- Consult a qualified professional if you are unsure about the installation process or wall type.
- Montaj sırasında çocukları ve evcil hayvanları uzak tutun.
2. Paket İçeriği
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to install the mount. Contact customer support for assistance.
- Full-Motion TV Wall Mount Assembly
- Duvara Montaj Donanımı (vidalar, dübeller)
- TV Mounting Hardware (various screw sizes, spacers)
- Kullanım Kılavuzu
Resim 2.1: Üzeriview of the KanexPro Full-Motion Tilt/Swivel TV Wall Mount. This image displays the main assembly of the wall mount, including the wall plate, articulating arms, and the VESA compatible TV plate.
3. Kurulum ve Kurulum
Follow these steps carefully to ensure a secure and stable installation of your TV wall mount.
3.1 Kurulum Öncesi Kontroller
- Duvar Tipi: Determine if your wall is solid concrete, brick, or wood stud. Different wall types require specific mounting hardware.
- Stud Finder: If mounting to wood studs, use a stud finder to locate the center of the studs.
- Gerekli Araçlar: Drill, level, tape measure, pencil, Phillips head screwdriver, socket wrench.
- Televizyon Uyumluluğu: Ensure your TV's VESA pattern and weight are within the mount's specifications. This mount is compatible with Hisense Roku TV 40H4 and similar models up to 66 lbs.
3.2 Duvar Plakasının Montajı
- Position the wall plate on the desired location on the wall. Use a level to ensure it is perfectly horizontal.
- Mark the drilling holes with a pencil.
- Drill pilot holes according to the marked positions and your wall type. For wood studs, drill 5/32 inch (4mm) holes. For concrete/brick, drill 3/8 inch (10mm) holes and insert wall anchors.
- Birlikte verilen vida ve rondelaları kullanarak duvar plakasını duvara monte edin. Sıkıca sıkın.
3.3 Attaching the TV Plate to the Television
- Televizyonunuzu dikkatlice, yüzü aşağı bakacak şekilde yumuşak ve temiz bir yüzeye yerleştirin.
- Televizyonunuzun arkasındaki VESA montaj deliklerini bulun.
- Select the appropriate screws and spacers from the provided hardware kit that fit your TV's mounting holes.
- Attach the TV plate (the part of the mount that connects to the TV) to the back of your television. Ensure it is centered and securely fastened. Do not overtighten.
3.4 Hanging the Television
- With assistance, carefully lift the television with the attached TV plate.
- Align the TV plate with the articulating arms of the wall-mounted assembly.
- Hook the TV plate onto the arms and ensure it is securely seated.
- Engage any safety locking mechanisms if present on your mount to prevent accidental dislodgement.
Image 3.1: Technical diagram illustrating the dimensions and articulation range of the KanexPro Full-Motion TV Wall Mount. This diagram shows the mount's extension, swivel, and tilt capabilities, along with key measurements in millimeters.
4. Montajın Çalıştırılması
Your KanexPro Full-Motion TV Wall Mount allows for flexible positioning of your television.
- Döndürme Ayarı: The mount allows for 90 degrees of swivel to the left and right. Gently push or pull the TV to achieve the desired viewaçı.
- Eğim Ayarı: The mount offers a tilt range of +20 to -20 degrees. Loosen the tilt adjustment knobs (if present), adjust the TV to the desired vertical angle, and then re-tighten the knobs to secure the position.
- Eklenti: The articulating arms allow the TV to be extended away from the wall for optimal viewing or retracted for a flush profile.
Always move the TV smoothly and avoid sudden, forceful movements. Ensure all cables have enough slack to accommodate the full range of motion without tension.
5. Bakım
Regular maintenance helps ensure the longevity and safe operation of your TV wall mount.
- Temizlik: Montaj yüzeyini yumuşak, kuru bir bezle silin. Yüzeye zarar verebilecek aşındırıcı temizleyicilerden veya çözücülerden kaçının.
- Periyodik Kontroller: Every 3-6 months, inspect all screws and bolts to ensure they are still tight. Re-tighten if necessary. Check for any signs of wear or damage to the mount components.
- Yağlama: The articulating joints are designed for smooth movement. If any stiffness occurs, a small amount of silicone-based lubricant can be applied to the pivot points.
6. Sorun Giderme
If you encounter issues with your TV wall mount, refer to the following common problems and solutions.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Televizyon kurulumdan sonra düz durmuyor. | Wall plate or TV plate not perfectly level. | Carefully remove the TV, adjust the wall plate or TV plate using a level, and re-mount. |
| Dağ gevşek veya sallantılı hissediliyor. | Mounting screws are not fully tightened or incorrect hardware used. | Ensure all wall and TV mounting screws are securely tightened. Verify correct hardware for your wall type. Do not exceed weight capacity. |
| Difficulty adjusting tilt or swivel. | Tilt knobs are too tight or joints require lubrication. | Loosen tilt knobs before adjusting. Apply a small amount of silicone-based lubricant to stiff joints. |
| TV cables are too tight. | Insufficient cable slack for full range of motion. | Ensure all cables have enough slack to prevent tension when the TV is moved to its maximum extension or angle. |
7. Özellikler
- Marka: Kanex Pro
- Modeli: Full-Motion Tilt/Swivel TV Wall Mount
- Montaj Tipi: Duvara Montaj
- Hareket Türü: Mafsallı, Döndürülebilir, Eğilebilir
- Malzeme: Alaşımlı Çelik
- Renk: Siyah
- Uyumlu Cihazlar: Television (e.g., Hisense Roku TV 40H4)
- Maksimum Ağırlık Kapasitesi: 66 lbs (30 kg)
- Döndürme Özelliği: 90 Degrees Left to Right
- Eğim Özelliği: +20 to -20 Degrees
- Ön monte: Yes, for quick installation
8. Garanti ve Destek
For warranty information or technical support, please contact KanexPro customer service directly. Refer to the product packaging or the official KanexPro webiletişim bilgileri için site.
Please have your product model information and purchase date available when contacting support.
