TC Electronic Ditto+ Looper Pedal Kullanım Kılavuzu

1. Giriş

The TC Electronic Ditto+ Looper Pedal is a compact and powerful looping device designed for musicians. It offers 60 minutes of looping time with unlimited overdubs, dynamic loop length, and 99 loop storage slots. Featuring a high-resolution color display and intuitive 1-knob control, the Ditto+ provides a streamlined looping experience. Its 24-bit uncompressed audio ensures high fidelity, while analog-dry-through preserves your original signal. This manual provides detailed instructions for setting up, operating, and maintaining your Ditto+ Looper Pedal.

2. Temel Özellikler

Multi-session Looper Pedal with 24-bit Sound Quality
99-loop Storage Capacity
High-resolution Color Display
Unlimited Overdubs
Intuitive 1-knob Control
Dynamic Loop Length for layering long overdubs onto shorter loops
Easy Import and Export of loops via USB
Retains loops in internal memory after power-down
Analog-dry-through design for signal integrity

3. Kurulum Kılavuzu

3.1 Paketin Açılması ve Muayene

Carefully remove the Ditto+ Looper Pedal from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. Retain the packaging for future transport or storage.

3.2 Güç Bağlantısı

The Ditto+ requires a 9V DC power supply (not included) with a center-negative polarity. Connect the power adapter to the 9V DC input jack on the pedal. Ensure the power supply meets the specifications (9 Volts, 0.1 Amps) to prevent damage.

Açılı view of TC Electronic Ditto+ Looper Pedal showing input/output jacks and power input

Resim 1: Açılı view of the Ditto+ pedal, highlighting the input and output jacks on the sides, and the power input jack. This view helps identify connection points.

3.3 Ses Bağlantıları

Enstrümanınızı (örneğin gitarınızı) şuraya bağlayın: GİRİŞ Pedalların sağ tarafındaki jakı, standart 1/4 inçlik bir enstrüman kablosu kullanarak bağlayın.
Bağlan ÇIKTI Pedalın sol tarafındaki jakı sizin amplifier or other effects pedals using another standard 1/4-inch instrument cable.

3.4 USB Bağlantısı

The Ditto+ features a USB port for importing and exporting loops. Connect a standard USB cable from the pedal to your computer for managing your loop library. The USB port is located on the top side of the pedal.

Açılı view of TC Electronic Ditto+ Looper Pedal showing the USB port

Resim 2: Açılı view of the Ditto+ pedal, clearly showing the USB port located on the top edge of the device, used for data transfer.

4. Kullanım Talimatları

4.1 Temel Döngü Fonksiyonları

Ön view of TC Electronic Ditto+ Looper Pedal with display and controls

Resim 3: Ön view of the Ditto+ pedal, displaying the main screen, the large central knob, the two arrow buttons, and the footswitch. This image illustrates the primary user interface.

Kayıt: Press the footswitch once to start recording. The display will indicate recording status.
Oynat/Durdur: After recording, press the footswitch once to stop recording and immediately start playback of your loop. During playback, press the footswitch once to stop the loop.
fazla kayıt: While a loop is playing, press the footswitch once to enter overdub mode. Any new audio played will be added to the existing loop. Press again to stop overdubbing and return to playback.
Geri al/Yinele: Press and hold the footswitch during playback to undo the last overdub. Press and hold again to redo it.
Döngüyü Temizle: Double-tap the footswitch quickly to stop playback and clear the current loop. Note: Be mindful of the double-tap timing to avoid accidental clearing during live performance.

4.2 Navigating Loops and Settings

The Ditto+ features a high-resolution color display and a large central knob for navigation and control. The two arrow buttons (< Ve >) allow you to scroll through different loop slots (up to 99) or menu options.

Selecting Loops: Use the arrow buttons to navigate between your 99 stored loop slots. The display will show the current loop number.
Adjusting Loop Volume: The large central knob controls the playback volume of the current loop. Turn it clockwise to increase volume and counter-clockwise to decrease.
Menülere Erişim: Pressing the central knob typically accesses menu options. Use the arrow buttons to navigate menu items and the knob to select or adjust values.

4.3 Extended Looping Mode

The Ditto+ offers an "Extended Looping Mode" which allows you to record a short initial loop and then overdub a longer phrase that automatically extends the overall loop length. This is particularly useful for creating complex arrangements.

Activate Extended Loop Mode: To enable this mode, press and hold both arrow buttons simultaneously. A menu will appear on the display. Navigate to the "Extended Loop Mode" option and select "ON".
Recording in Extended Mode:
- Record your initial, shorter loop as usual (press footswitch once to start, once to end).
- Immediately after the initial loop starts playing, press the footswitch once to enter overdub mode.
- Play your longer overdub. The pedal will use the original loop as a timing reference.
- To end the extended overdub, tap the footswitch erken, before the desired end point. The pedal will then close the loop at the end of the next full bar, based on the original loop's timing. This ensures a musically coherent loop extension.
Subsequent Overdubs: After the extended loop is established, subsequent overdubs will function as normal, adding layers to the new, longer loop.

Note: The extended loop feature typically allows for one primary extension. You cannot infinitely re-adjust the loop length multiple times using this method.

4.4 Import/Export Loops

Connect the Ditto+ to your computer via USB. The pedal will appear as a mass storage device, allowing you to drag and drop audio files (WAV format recommended) to and from its internal memory. This enables you to back up your loops or load pre-recorded tracks.

5. Bakım

Temizlik: Pedalların dış yüzeyini temizlemek için yumuşak, kuru bir bez kullanın. Aşındırıcı temizleyicilerden veya çözücülerden kaçının.
Depolamak: When not in use for extended periods, store the pedal in a dry, cool environment, away from direct sunlight and extreme temperatures.
Güç: Always disconnect the power supply when the pedal is not in use or during cleaning.

6. Sorun Giderme

Sorun	Olası Neden	Çözüm
No power / Pedal does not turn on	Incorrect power supply; loose connection; faulty power adapter.	Ensure a 9V DC, center-negative power supply is used. Check all connections. Try a different power adapter if available.
Pedaldan ses gelmiyor	Incorrect audio connections; instrument volume low; amplifier off; faulty cables.	Cihazı doğrulayın ve amplifier connections. Check instrument and amplifier volume. Test with different cables.
Loop clears unexpectedly	Accidental double-tap of footswitch.	The "clear loop" function is a quick double-tap. Practice precise footswitch presses to avoid accidental clearing.
Difficulty with Extended Looping Mode	Incorrect activation or timing.	Basmayı unutmayın ve hold both arrow buttons simultaneously to activate the mode. For ending an extended overdub, tap the footswitch erken to allow the pedal to close the loop at the next bar's end.
Loops not saving	Power interruption during saving; memory issue.	The Ditto+ automatically retains loops. If issues persist, try re-saving or performing a factory reset (refer to official TC Electronic documentation for reset procedures).

7. Teknik Özellikler

Modeli: Ditto+
Marka: TC Elektronik
Ürün Ağırlığı: 6.3 ons
Ürün Ölçüleri: 4 x 2.6 x 2.4 inç
Donanım Arayüzü: USB
Sinyal Formatı: Analog
Güç Kaynağı: Kablolu Elektrik
Cilttage: 9 Volt Doğru Akım
Ampöfke: 0.1 A (100mA)
Kontrol Türü: Knob, Footswitch, Buttons
Döngüsel Depolama: 99 yuva
Döngü zamanı: 60 dakikaya kadar
Ses kalitesi: 24-bit uncompressed

8. Garanti ve Destek

For warranty information, technical support, or further assistance with your TC Electronic Ditto+ Looper Pedal, please refer to the official TC Electronic websitesini ziyaret edebilir veya doğrudan müşteri destek ekibiyle iletişime geçebilirsiniz. Ayrıca şu adresi de ziyaret edebilirsiniz: TC Electronic Store on Amazon Ek ürün bilgisi ve kaynakları için.

	TC Elektronik Ditto Looper Kullanım Kılavuzu TC Electronic Ditto Looper için kurulum, kullanım, özellikler, teknik özellikler ve sorun giderme konularını kapsayan kapsamlı kullanıcı kılavuzu. Döngülerinizi nasıl kaydedeceğinizi, üzerine kayıt yapacağınızı, geri alacağınızı, yeniden yapacağınızı ve yöneteceğinizi öğrenin.
	TC Electronic Ditto Looper User Manual: Features, Operation, and Setup Comprehensive user manual for the TC Electronic Ditto Looper guitar pedal. Learn about its features, operation, setup exampDosyalar, teknik özellikler ve sorun giderme.
	TC Electronic Ditto X4 Looper User Manual - Guitar Effects Pedal Guide Comprehensive user manual for the TC Electronic Ditto X4 Looper, a dual-track guitar looper pedal. Learn about its features, controls, effects, setup, hookup diagrams, and advanced functions for creating and managing loops.
	TC Elektronik Ditto Looper Kullanım Kılavuzu Comprehensive user manual for the TC Electronic Ditto Looper, detailing its features, operation, setup, and technical specifications for guitar and bass players. Learn how to record, overdub, undo, redo, and manage your loops.
	TC Elektronik Ditto Looper Kullanım Kılavuzu Comprehensive user manual for the TC Electronic Ditto Looper, detailing its features, setup, operation, specifications, and troubleshooting. Learn how to record, overdub, undo, and manage loops with this compact guitar effects pedal.
	TC Electronic DITTO JAM X2 LOOPER Hızlı Başlangıç Kılavuzu Quick start guide for the TC Electronic DITTO JAM X2 LOOPER, a versatile looper pedal for musicians. Learn about loop clearing, BeatSense LED functions, microphone placement, and regulatory compliance.