1. Giriş
This manual provides essential information for the safe and efficient operation, installation, and maintenance of the Wenglor OKII403C0103 Photoelectric Sensor. Please read this manual thoroughly before using the device.
2. Güvenlik Talimatları
Adherence to these safety instructions is crucial for preventing personal injury and damage to the sensor or other equipment.
- Kurulum, kablolama veya bakım öncesinde elektrik bağlantısının kesildiğinden emin olun.
- Montaj ve kablolama işlemleri sadece kalifiye personel tarafından yapılmalıdır.
- Belirtilen hacmi aşmayıntage ve mevcut derecelendirmeler.
- Protect the sensor from mechanical shock and excessive vibration.
- Operate within the specified environmental conditions (temperature, humidity, IP rating).
3. Ürün Açıklaması ve Özellikleri
The Wenglor OKII403C0103 is a robust photoelectric retro-reflective sensor designed for reliable object detection in industrial environments. It features an angled head for flexible mounting and a 4-meter detection range.
Figure 3.1: The Wenglor OKII403C0103 Photoelectric Sensor. This image shows the metallic cylindrical body of the sensor, an angled head with a sensing window, and an M12 connector at the base for electrical connection. Product specifications are visible on the side of the sensor body.
Temel Özellikler:
- Tip: Photoelectric Retro-Reflective Sensor
- Kafa Tipi: açılı kafa
- Algılama Aralığı: Up to 4 meters (with suitable reflector)
- Çıktı: PNP (Push-Pull) with Light-On (LO) and Dark-On (DO) functionality
- Bağlantı: M12 Bağlayıcı
- Koruma Derecesi: IP68/IP69K (High protection against dust and water ingress, including high-pressure/steam jet cleaning)
4. Kurulum ve Kurulum
Proper installation is critical for optimal performance and longevity of the sensor.
4.1 Montaj
- Mount the sensor securely using appropriate brackets and fasteners.
- Ensure the sensing window is clear of obstructions.
- Position the sensor and reflector (not included) such that the light beam is not interrupted by ambient light sources or reflective surfaces other than the target reflector.
- The angled head allows for flexible mounting in confined spaces or for specific beam alignment requirements.
4.2 Kablolama
The sensor uses an M12 connector. Refer to the pinout diagram below for correct wiring.
| Pin | Renk (Standart) | Tanım |
|---|---|---|
| 1 | Kahverengi | +V (Operating Voltage) |
| 3 | Mavi | 0V (Ground) |
| 4 | Siyah | Output (PNP LO/DO) |
| 2 | Beyaz | Not Connected / Function Input (Check specific model documentation if applicable) |
Connect the sensor to a stable DC power supply within the specified voltage range. Ensure correct polarity.
5. Kullanım Talimatları
The OKII403C0103 sensor operates by detecting the presence or absence of an object interrupting the light beam between the sensor and a retro-reflector.
5.1 İşlevsellik
- Retro-Reflective Principle: The sensor emits a light beam that is reflected back by a special reflector. An object passing between the sensor and the reflector interrupts this beam, triggering the output.
- PNP Output: The output switches to a positive voltage (+V) when activated.
- Light-On (LO): The output is active when light is received (no object detected).
- Dark-On (DO): The output is active when no light is received (object detected).
5.2 Adjustment (if applicable)
Some models may feature a sensitivity adjustment potentiometer. If present, rotate the potentiometer to fine-tune the detection sensitivity for your specific application and reflector distance. Observe the status indicator LED (if present) to confirm proper alignment and detection.
6. Bakım
The Wenglor OKII403C0103 sensor is designed for minimal maintenance. Regular checks can ensure continued reliable operation.
- Temizlik: Periodically clean the sensing window and reflector with a soft, damp Bez. Aşındırıcı temizleyicilerden veya çözücülerden kaçının.
- Denetleme: Regularly inspect the sensor, cable, and connector for any signs of damage, wear, or loose connections.
- Çevre Koruma: Ensure the sensor remains within its specified operating temperature and humidity ranges. The IP68/IP69K rating provides excellent protection against water and dust, but avoid prolonged submersion or direct high-pressure spray if not necessary.
7. Sorun Giderme
This section provides solutions to common issues. If the problem persists, contact Wenglor technical support.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Sensör nesneleri algılamıyor. |
|
|
| Sensor output always ON/OFF |
|
|
8. Özellikler
Detailed technical specifications for the Wenglor OKII403C0103 Photoelectric Sensor.
- Modeli: OKII403C0103
- Sensör Tipi: Photoelectric Retro-Reflective
- Kafa Tipi: Açılı
- Algılama Aralığı: 4 metre (13.1 fit)
- Çıktı Türü: PNP (Push-Pull)
- Çıktı Fonksiyonu: Light-On (LO) / Dark-On (DO)
- Bağlantı: M12 Bağlayıcı
- Koruma Derecesi: IP68 / IP69K
- Boyutlar: Refer to manufacturer's datasheet for detailed dimensions.
- Üretici: Wenglor
9. Garanti ve Destek
Wenglor products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the official Wenglor webWeb sitesini ziyaret edin veya yetkili distribütörünüzle iletişime geçin.
For technical support, product inquiries, or service, please contact Wenglor customer service or your local Wenglor representative. Contact information can typically be found on the official Wenglor webalan: www.wenglor.com
