giriiş
This manual provides detailed instructions for the assembly, operation, and maintenance of your Tempur-Pedic TP4000 Ergonomic Fabric Mid-Back Task Chair. Designed for durability and comfort, this chair features TEMPUR material memory foam for pressure relief and weight distribution, along with multiple adjustment options to customize your seating experience.
Temel özellikler şunlardır:
- Mid-back task chair design.
- Polyester fabric upholstery for durability and extended comfort.
- Height and width adjustable arms for enhanced ergonomics.
- Center tilt with tilt lock, forward tilt, and tilt tension adjustments.
- Independent back and seat angle adjustments.
- Seat and back height adjustment.
- Nylon 5-star base with dual-wheel casters.
Güvenlik Bilgileri
Lütfen montaj ve kullanımdan önce tüm güvenlik uyarılarını okuyun.
- Full assembly is required.
- Use caution when adjusting height, width, and tilt features to prevent injury.
- 250 lbs'lik maksimum ağırlık kapasitesini aşmayın.
- Ürünle birlikte verilen talimatları mutlaka izleyin.
Paket İçeriği
Before beginning assembly, ensure all parts are present and undamaged. The package should include:
- Chair seat and back components.
- Kolçaklar.
- Nylon 5-star base.
- Dual-wheel casters.
- Gas lift cylinder.
- Assembly hardware (screws, washers, etc.).
- Allen wrench (provided for assembly).
- Montaj talimatları.
Kurulum ve Montaj
Assembly is required for this chair. Please refer to the included assembly instructions for detailed, step-by-step guidance. An Allen wrench is provided for your convenience.
Şekil 1: Ön view of the assembled Tempur-Pedic TP4000 Task Chair.
Figure 2: Chair dimensions for proper placement and fit.
Kullanım Talimatları (Ayarlamalar)
Your Tempur-Pedic TP4000 chair offers multiple adjustments to ensure ergonomic comfort. Familiarize yourself with these controls to optimize your seating position.
1. Koltuk Yükseklik Ayarı
Locate the lever on the right side, beneath the seat. Pull the lever up to raise or lower the seat. Release the lever at your desired height. Ensure your feet are flat on the floor or a footrest, and your knees are at a 90-degree angle.
2. Back Height Adjustment
The backrest can be adjusted vertically. While seated, lift the backrest to ratchet it up to your preferred lumbar support position. To lower, lift the backrest to its highest point, then allow it to drop to its lowest setting, and then re-adjust upwards.
3. Armrest Height and Width Adjustment
The armrests can be adjusted for both height and width. Look for buttons or levers on the armrest supports to unlock and adjust. Position them so your arms are comfortably supported and your shoulders are relaxed.
Şekil 3: Yan view showing adjustment levers.
4. Seat and Back Angle Adjustments (Independent)
This chair features independent levers for adjusting the seat and back angles. Use these to find the most comfortable and supportive recline for your posture. Lock the levers once your desired angle is achieved.
5. Center Tilt with Lock, Forward Tilt, and Tilt Tension
These controls allow you to adjust the chair's recline and resistance. The tilt tension knob (usually a round knob under the seat) controls the ease of recline. The tilt lock lever allows you to lock the chair in an upright or reclined position. The forward tilt feature provides an option to tilt the seat slightly forward, which can be beneficial for certain tasks or postures.
Şekil 4: Geri view sandalyenin.
Bakım
To ensure the longevity and appearance of your Tempur-Pedic TP4000 chair, follow these simple maintenance guidelines:
- Temizlik: Spot clean the polyester fabric upholstery as needed. Use a mild detergent and a damp Bez. Sert kimyasallardan veya aşındırıcı temizleyicilerden kaçının.
- Tekerlekler: Periodically check the dual-wheel casters for debris (hair, lint) and clean them to ensure smooth movement.
- Donanım: Occasionally check all screws and bolts to ensure they are tight. Re-tighten if necessary.
- Genel Bakım: Avoid exposing the chair to direct sunlight for prolonged periods to prevent fading.
Sorun giderme
If you encounter any issues with your chair, please review Aşağıda sık karşılaşılan sorunlar ve çözümleri yer almaktadır:
- Sandalye yüksekliği ayarlanmıyor: Gaz kaldırma kolunun tam olarak oturduğundan emin olun. Sorun devam ederse, gaz kaldırma silindirinin değiştirilmesi gerekebilir.
- Sandalye sallanıyor: Check that all assembly hardware is securely tightened. Ensure the casters are properly inserted into the base.
- Tekerlekler düzgün dönmüyor: Clean any debris from the caster wheels. If they are damaged, they may need to be replaced.
- Backrest or seat not locking: Verify that the respective adjustment levers are fully engaged in the locked position.
For persistent issues or parts replacement, please contact customer support.
Özellikler
| Özellik | Detay |
|---|---|
| Marka | Tempur-Pedic |
| Model Adı | TP4000 |
| Renk | Gri |
| Ürün Boyutları (D x G x Y) | 26.8" x 28" x 39.75" - 43.25" |
| Malzeme | Polyester Fabric, Memory Foam |
| Sırt Stili | Katı Sırt |
| Özel Özellikler | Arm Rest, Ergonomic, Rolling, Adjustable |
| Ürün Bakım Talimatları | Tertemiz |
| Maksimum Ağırlık Önerisi | 250 Pound |
| Certifications Standards | Meets ANSI/BIFMA |
| Toplantı | Full assembly required |
Garanti ve Destek
Your Tempur-Pedic TP4000 Ergonomic Fabric Mid-Back Task Chair is covered by a 10 yıllık üretici sınırlı garantisiBu garanti, normal kullanım koşullarında malzeme ve işçilik hatalarını kapsar.
For warranty claims, technical support, or to order replacement parts, please contact Tempur-Pedic customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and model number (TP4000) ready when contacting support.
