1. Giriş
This instruction manual provides essential information for the proper use and maintenance of your Traceable Stainless Steel Probe with Handle, Model 37804-06. This probe is specifically designed as a replacement or accessory for compatible Scientific Platinum RTD Thermometers, such as the Traceable scientific RTD thermometer 37804-06. Please read this manual thoroughly before operation to ensure accurate measurements and prolonged product life.
2. Ürün Bittiview
The Traceable Stainless Steel Probe with Handle is engineered for precision temperature measurement in scientific and industrial applications. Its robust stainless steel construction ensures durability, while the integrated handle provides ergonomic and safe handling during use. The probe is designed to optimize the performance of your RTD thermometer by providing a wide temperature measuring range and a reliable USB connection interface.
Image 1: Traceable Stainless Steel Probe with Handle
Temel Özellikler:
- Malzeme: Dayanıklı paslanmaz çelik yapı.
- Ergonomi: Features a handle for easy and secure handling.
- Bağlantı: Designed with a USB connection for compatibility with RTD thermometers.
- Sıcaklık Aralığı: Capable of measuring temperatures from –200 to 500°C (–328 to 932°F).
- Uyumluluk: Ideal replacement or accessory for Traceable scientific RTD thermometer 37804-06.
- Kalibrasyon: Includes a NIST-traceable certificate from an A2LA accredited (1750.01) calibration laboratory, ensuring accuracy and reliability.
3. Kurulum
- Paketin açılması: Probu ambalajından dikkatlice çıkarın. Herhangi bir görünür hasar olup olmadığını kontrol edin.
- Bağlantı: Connect the probe's USB connector to the designated USB port on your compatible Traceable scientific RTD thermometer (e.g., Model 37804-06). Ensure the connection is firm and secure.
- İlk Kontrol: Once connected, power on your RTD thermometer and verify that the probe is recognized and displaying a temperature reading.
4. Kullanım Talimatları
This probe is designed for straightforward temperature measurement. Always refer to your specific RTD thermometer's manual for detailed operational procedures, as the probe functions as an input device for the thermometer.
- Atama: Insert the stainless steel tip of the probe into the substance or environment where temperature measurement is required. Ensure adequate contact for accurate readings.
- İşleme: Utilize the integrated handle to safely maneuver and position the probe, especially when dealing with extreme temperatures or hard-to-reach areas.
- Okuma: Observe the temperature display on your connected RTD thermometer. Allow sufficient time for the reading to stabilize before recording.
- Sıcaklık Aralığı: Do not expose the probe to temperatures outside its specified range of –200 to 500°C (–328 to 932°F) to prevent damage.
Resim 2: Örn.ample of a Traceable thermometer in use, similar to how this probe would be connected.
5. Bakım
Proper maintenance ensures the longevity and accuracy of your probe.
- Temizlik: After each use, wipe the probe clean with a soft, damp cloth. For substances that may adhere, use a mild detergent solution. Ensure the probe is thoroughly dried before storage. Avoid submerging the handle or USB connector in liquids.
- Depolamak: Store the probe in a clean, dry environment, away from extreme temperatures and corrosive chemicals. Protect the USB connector from dust and moisture.
- Denetleme: Periodically inspect the probe for any signs of physical damage, such as bends in the shaft or damage to the handle or connector.
6. Sorun Giderme
If you encounter issues with your probe, consider the following common troubleshooting steps:
- Okuma Yok/Düzensiz Okumalar:
- Ensure the USB connection to the RTD thermometer is secure.
- Verify that the RTD thermometer is powered on and functioning correctly.
- Check if the probe tip is making proper contact with the substance being measured.
- Confirm the probe is within its specified operating temperature range.
- Fiziksel Hasar: If the probe shows signs of physical damage, such as a bent shaft or damaged connector, it may require replacement.
For persistent issues, please contact Traceable customer support or refer to the support information provided with your RTD thermometer.
7. Özellikler
| Özellik | Şartname |
|---|---|
| Model Numarası | 37804-06 |
| Sıcaklık Ölçüm Aralığı | –200 ila 500 ° C (–328 ila 932 ° F) |
| Dış Malzeme | Paslanmaz çelik |
| Bağlantı Türü | USB |
| Uyumluluk | Traceable scientific RTD thermometer 37804-06 (and similar compatible models) |
| Ürün Ağırlığı | 8 ons |
| Ürün Bakım Talimatları | Temiz Silmek |
8. Garanti ve Destek
This Traceable Stainless Steel Probe with Handle comes with a 1 yıl garanti from the date of purchase. Additionally, it includes a NIST-traceable certificate from our A2LA accredited (1750.01) calibration laboratory, ensuring its accuracy and compliance with industry standards.
For technical support, warranty claims, or further assistance, please contact the manufacturer, COLE-PARMER, or your authorized Traceable product distributor. Please have your product model number (37804-06) and purchase information available when contacting support.
