ScreenBeam MyWirelessTV2 Wireless HD Transmitter & Receiver Extender User Manual

giriiş

The ScreenBeam MyWirelessTV2 system provides a wireless solution for transmitting high-definition video and audio from your HDMI-enabled media devices to an HDTV or projector. This system eliminates the need for long HDMI cables, offering flexibility in TV placement and reducing cable clutter. It supports Full HD 1080P resolution and 5.1 surround sound, with a range of up to 150 feet through walls, floors, and ceilings.

Neler Dahil?

Kuruluma başlamadan önce, lütfen pakette tüm bileşenlerin mevcut olduğundan emin olun:

• 1 Wireless HD Transmitter
• 1 Wireless HD Receiver
• 2 Güç Adaptörü
• 2 HDMI Kablosu
• 1 IR Blaster Kablosu
• 1 IR Receiver Extension Cable
• 2 Velcro Adhesive Mounts
• Hızlı Başlangıç ​​Kılavuzu

Figure 1: Package Contents of MyWirelessTV2 Kit

Kurulum Talimatları

Follow these steps to set up your MyWirelessTV2 system:

1. Vericiyi bağlayın: Connect one end of an HDMI cable to the HDMI output of your media source (e.g., cable box, Blu-ray player, gaming console). Connect the other end of the HDMI cable to the HDMI Girişi port on the MyWirelessTV2 Transmitter.
2. Connect Transmitter Power: Plug one power adapter into the 5V DC / 2A port on the Transmitter and then into a power outlet. The Power LED on the transmitter will illuminate.
3. Alıcıyı bağlayın: Connect one end of the second HDMI cable to the HDMI Out to TV port on the MyWirelessTV2 Receiver. Connect the other end of the HDMI cable to an available HDMI input on your HDTV or projector.
4. Connect Receiver Power: Plug the second power adapter into the 5V DC / 2A port on the Receiver and then into a power outlet. The Power LED on the receiver will illuminate.
5. IR Blaster Setup (Optional): If you wish to control your source device (e.g., cable box) from the TV location, connect the IR Blaster cable to the IR İletimi port on the Transmitter. Position the IR Blaster emitter directly over the IR sensor of your source device. Connect the IR Receiver Extension Cable to the IR Uzm. port on the Receiver and place the IR receiver in a location where it can receive signals from your remote control.
6. Cihazları Açma: Ensure both the Transmitter and Receiver are powered on. Turn on your TV and select the correct HDMI input for the Receiver. The system will automatically establish a wireless connection.

Figure 2: Transmitter and Receiver Port Diagram

Kullanım Talimatları

Once the MyWirelessTV2 system is set up, it operates automatically. The Transmitter and Receiver will establish a connection and begin streaming content from your source device to your display.

Temel Özellikler:

• Yüksek Tanımlı Akış: Enjoy clear 1080p60 HD video and 3D content.
• Dijital Ses: Supports 5.1 digital audio for an immersive sound experience.
• Genişletilmiş Menzil: Transmits signals up to 150 feet through walls, floors, and ceilings.
• IR Remote Control Support: Use your existing remote control to manage your source device from the TV location via the IR Blaster and Receiver cables.
• Multi-Room Capability: Sends live HD content wirelessly to up to 3 HDTVs simultaneously (additional receivers sold separately).
• No Wi-Fi Required: The system operates on its own wireless frequency, independent of your home Wi-Fi network.

Uyumlu Cihazlar:

The MyWirelessTV2 system is compatible with a wide range of HDMI-enabled devices, including:

• Cable and Satellite Set-Top Boxes
• Blu-ray and DVD Players
• Gaming Consoles (e.g., Xbox, PlayStation)
• Streaming Media Devices
• Any device with an HDMI output

Figure 3: Compatible HDMI Devices

Figure 4: Indoor Wireless Setup Example

Figure 5: Outdoor Wireless Setup Example

Bakım

The MyWirelessTV2 system requires minimal maintenance. To ensure optimal performance and longevity:

• Keep the Transmitter and Receiver units clean by wiping them with a soft, dry cloth.
• Ensure proper ventilation around both units to prevent overheating. Avoid placing them in enclosed spaces without airflow.
• Protect the units from extreme temperatures, moisture, and direct sunlight.
• Tüm kablo bağlantılarının güvenli olduğundan emin olmak için düzenli olarak kontrol edin.

Sorun giderme

If you encounter issues with your MyWirelessTV2 system, refer to the following troubleshooting tips:

1. No Picture/Sound or Intermittent Signal:
   • Ensure both the Transmitter and Receiver are powered on and their power LEDs are illuminated.
   • Verify that all HDMI cables are securely connected to both the source device, Transmitter, Receiver, and TV.
   • Confirm your TV is set to the correct HDMI input for the Receiver.
   • Check the distance between the Transmitter and Receiver. While rated for up to 150 feet, environmental factors (thick walls, metal objects, other wireless devices) can reduce range. Try moving the units closer together.
   • Experiment with the orientation and placement of both the Transmitter and Receiver. Sometimes a slight adjustment (e.g., placing a unit on its side) can improve signal strength.
   • Minimize obstructions between the Transmitter and Receiver. Large metal objects, concrete walls, or multiple layers of building materials can interfere with the wireless signal.
   • If the screen shows a 'Connecting to Transmitter' message for an extended period, try power cycling both the Transmitter and Receiver.
2. Kızılötesi Uzaktan Kumanda Çalışmıyor:
   • Ensure the IR Blaster cable is securely connected to the Transmitter and its emitter is positioned directly over the IR sensor of your source device.
   • Verify the IR Receiver Extension Cable is connected to the Receiver and placed where it can clearly receive signals from your remote.
   • Check for any obstructions between your remote control and the IR Receiver.
3. Picture Quality Issues (Fuzzy/Compressed):
   • This can sometimes occur briefly upon initial connection or power-up. The system should quickly adjust to optimal quality. If it persists, refer to the signal troubleshooting steps above.

Özellikler

Garanti Bilgileri

For detailed warranty information regarding your ScreenBeam MyWirelessTV2, please refer to the official ScreenBeam webGaranti şartları ve koşulları, bölgeye ve satıcıya göre değişiklik gösterebilir. Garanti bilgileri için lütfen web sitesini veya ürününüzle birlikte gelen garanti kartını inceleyin.

Müşteri Desteği

If you require further assistance or have questions not covered in this manual, please visit the official ScreenBeam support website for FAQs, software updates, and contact information for technical support.