1. Ürün Bittiview
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P6064-31 1-Light Wall Lantern. This fixture features an oval form factor with a grid overlay and etched glass shades, finished in black. It is designed for both outdoor and suitable indoor applications.
Şekil 1: Ön view of the Progress Lighting P6064-31 Wall Lantern.
2. Güvenlik Bilgileri
UYARI: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation or servicing. All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.
- Maksimum su miktarını aşmayıntagAmpul için belirtilen e.
- Kırılmayı önlemek için cam parçaları dikkatli tutun.
- Yanıcı maddeleri aydınlatma armatüründen uzak tutun.
3. Paket İçeriği
Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:
- Wall Lantern Fixture (P6064-31)
- Oymalı Cam Abajur
- Montaj Donanımı Takımı
- Kurulum Sayfası
4. Özellikler
| Özellik | Detay |
|---|---|
| Model Numarası | P6064-31 |
| Marka | İlerleme Aydınlatma |
| Bitiş Türü | Finished (Black) |
| Ürün Boyutları | 16.13"U x 9.25"G x 6.13"Y |
| Ürün Ağırlığı | 4.63 Pound |
| Montaj Tipi | Çıkıntılı |
| Su Direnç Seviyesi | Su geçirmez |
| Işık Kaynağı Wattage | 100 Watt (Maks.) |
| Cilttage | 120 Volt |
| Maksimum Işık Çıkışı | 1600 Lümen |
| Işık Kaynağı Türü | Incandescent (Medium Base) |
| Malzeme | Alüminyum |
Figure 2: Product dimensions for the P6064-31 Wall Lantern.
5. Kurulum Talimatları
5.1 Ön Kurulum
- Devre kesiciden veya sigorta kutusundan gücü kapatın.
- Carefully unpack the fixture and inspect for any damage.
- Ensure all parts listed in Section 3 are present.
5.2 Sizing and Placement Guidance
Proper sizing and placement are crucial for optimal illumination and aesthetic appeal. Refer to the video below for visual guidance.
Video: Outdoor Lighting - Sizing and Selection. This video provides guidance on selecting the appropriate size and mounting height for outdoor lighting fixtures, including wall lanterns, for entryways and garages.
- Fikstür Boyutu: For entrances and garages, select fixtures that measure 1/4 to 1/3 of the door's height.
- Montaj Yüksekliği: Mount fixtures at eye level, approximately 5.5 to 6 feet from the ground to the fixture's center.
- Entrance Doors: Mount lights on either side of the door, 8 to 10 feet apart.
- Garage Doors: For a one-car garage, use a single wall lantern. For two or more car garages, mount lights on either side of the doors, or across the top of the doors for even illumination.
Şekil 3: Ör.ample of wall lantern placement for an entryway.
Şekil 4: Ör.ample of wall lantern placement for a garage.
5.3 Kablolama ve Montaj
- Verilen vidaları kullanarak montaj braketini bağlantı kutusuna takın.
- Connect the fixture's wires to the house wires: black to black (live), white to white (neutral), and bare copper (ground) to the house ground wire and the mounting bracket. Secure connections with wire nuts.
- Tüm kabloları dikkatlice bağlantı kutusuna sokun.
- Align the fixture with the mounting bracket and secure it with the provided screws or nuts.
5.4 Ampul Montajı
- Insert one medium base incandescent bulb (not included) into the socket.
- Maksimum su miktarını aşmayıntage 100 Watt.
- Install the etched glass shade by carefully placing it over the bulb and securing it according to the specific instructions on the included installation sheet.
6. Kullanım Talimatları
Once installed and powered, operate the wall lantern using the standard wall switch connected to the fixture's circuit. Ensure the bulb is correctly installed and the power is on at the circuit breaker.
7. Bakım
To maintain the appearance and functionality of your fixture:
- Temizlik: Temizlemeden önce elektriği kapatın. Armatürü yumuşak bir bezle silin.amp Bez kullanın. Aşındırıcı temizleyiciler veya çözücüler kullanmayın, çünkü bunlar yüzeye veya cama zarar verebilir.
- Ampul Değişimi: Turn off power before replacing the bulb. Allow the bulb to cool completely. Replace with a new medium base incandescent bulb, not exceeding 100 Watts.
8. Sorun Giderme
If your fixture is not operating correctly, refer to the following common issues:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Işık yanmıyor | Fikstürde güç yok | Check circuit breaker, wall switch, and wiring connections. |
| Ampul yanmış | Ampulü değiştirin. | Ampulün sıkıca vidalandığından emin olun. |
| Titreyen ışık | Gevşek ampul veya kablo bağlantısı | Tighten bulb. Check wiring connections (with power off). |
| Fixture is dim | Yanlış ampul wattage | Ampulün ne kadar iyi çalıştığından emin oluntage is appropriate and not too low. |
9. Garanti ve Destek
Bu Progress Lighting aydınlatma armatürü bir örtü ile kaplıdır. 1 yıllık Sınırlı Garanti. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.
For warranty claims or technical assistance, please refer to the contact information provided on your purchase receipt or visit the official Progress Lighting webalan.
