1. Giriş
This instruction manual provides essential information for the proper installation, operation, and maintenance of the Wheelock WHST-H15 Paging Horn. Please read this manual thoroughly before attempting to install or operate the device to ensure safe and efficient performance. Retain this manual for future reference.
2. Güvenlik Bilgileri
UYARI:
- Kurulum ve kablolama işlemleri yerel ve ulusal elektrik yönetmeliklerine uygun olarak kalifiye personel tarafından yapılmalıdır.
- Disconnect power before installing or servicing the device to prevent electric shock.
- Ensure the mounting surface can adequately support the weight of the paging horn.
- Do not expose the device to excessive moisture or extreme temperatures beyond its specified operating range.
- Yalnızca belirtilen hacmi kullanıntage inputs (25V, 70V, 100V) to avoid damage to the unit.
3. Paket İçeriği
Paketi açtığınızda tüm bileşenlerin mevcut ve hasarsız olduğunu doğrulayın:
- Wheelock WHST-H15 Paging Horn (1 unit)
- Adjustable Mounting Bracket (pre-attached or separate)
- Installation Hardware (screws, washers, nuts - quantity may vary)
- Bu Kullanım Kılavuzu
4. Kurulum ve Kurulum
The Wheelock WHST-H15 Paging Horn is designed for versatile installation with its adjustable, weatherproof mounting. It supports 25V, 70V, and 100V audio systems.

Figure 1: Wheelock WHST-H15 Paging Horn. This image displays the Wheelock WHST-H15 Paging Horn, featuring its conical speaker and an adjustable mounting bracket at the base. The horn is designed for clear audio projection in various environments.
4.1 Mounting the Paging Horn
- Konum Seçin: Choose a suitable mounting location that provides optimal sound coverage and is structurally sound. Consider the weatherproof design for outdoor applications.
- Güvenli Braket: If the mounting bracket is separate, attach it securely to the chosen surface using appropriate hardware. Ensure it is level and stable.
- Attach Horn: Mount the paging horn to the bracket. Use the adjustable mechanism to orient the horn for desired sound direction. Tighten all fasteners to prevent movement.
4.2 Kablo Bağlantıları
The WHST-H15 supports 25V, 70V, and 100V constant voltage audio systems. It also features a 15W power rating.
- Güç Seçimi: vol yerini bultage selector switch or terminals on the horn. Set it to match your audio system's output voltage (25V, 70V, or 100V). Incorrect voltagE seçimi cihaza zarar verebilir.
- Connect Audio Lines: Connect the audio input lines from your amplifier or paging system to the designated terminals on the horn. Observe correct polarity (+/-).
- Güvenli Bağlantılar: Ensure all wiring connections are tight and properly insulated to prevent short circuits and ensure reliable operation.
5. Kullanım Talimatları
Once installed and wired correctly, the Wheelock WHST-H15 Paging Horn operates in conjunction with your connected audio system.
- Güç Açık: Apply power to your audio amplifier or paging system.
- Sesi Test Et: Initiate a test page or audio signal through your system.
- Adjust Volume/Direction: If necessary, adjust the output volume from your amplifier. The horn's direction can be fine-tuned using its adjustable mounting bracket.
Note: The WHST-H15 is a passive device and does not have its own volume control. Volume adjustments are made at the audio source.
6. Bakım
The Wheelock WHST-H15 Paging Horn requires minimal maintenance to ensure long-term performance.
- Düzenli Muayene: Periodically inspect the horn and its mounting bracket for any signs of damage, corrosion, or loose connections.
- Temizlik: Clean the exterior of the horn with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no moisture enters the internal components.
- Çevre Koruma: While weatherproof, extreme environmental conditions may necessitate more frequent checks.
7. Sorun Giderme
If you encounter issues with your Wheelock WHST-H15 Paging Horn, refer to the following common problems and solutions:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Ses çıkışı yok |
|
|
| Distorted or low sound |
|
|
| Horn not securely mounted |
|
|
8. Özellikler
| Marka | Tekerlek kayası |
| Örnek | WHST-H15 |
| Güç Derecelendirmesi | 15 Watt |
| Cilttage Uyumluluk | 25V, 70V, 100V (selectable) |
| Montaj | Ayarlanabilir Montaj Braketi |
| Çevresel | Hava koşullarına dayanıklı |
| Renk | Bej |
| Ürün Boyutları (UxGxY) | 11 x 11 x 11 inç |
| Ürün Ağırlığı | 0.01 ons |
| İlk Mevcut Tarih | 21 Kasım 2013 |
9. Garanti ve Destek
For warranty information and technical support, please refer to the official Wheelock webSite üzerinden satın alabilir veya doğrudan müşteri hizmetleriyle iletişime geçebilirsiniz. Satın alma belgenizi saklayın.
Wheelock Customer Support: Visit Eaton's Wheelock Webalan





