giriiş
This manual provides instructions for the installation, operation, and maintenance of your SOMFY Situo RTS Pure radio wall transmitter. This device is designed for the manual control of one or more radio-controlled Somfy drives, such as blinds, awnings, or roller shutters. Please read this manual carefully before using the product to ensure safe and correct operation.
Güvenlik Talimatları
- Cihazınızı nemden ve aşırı sıcaklıklardan uzak tutunuz.
- Cihazı kendiniz açmaya veya onarmaya çalışmayın. Tüm servis işlemlerini yetkili personele yaptırın.
- Ensure the battery is inserted correctly according to polarity markings.
- Kullanılmış pilleri yerel düzenlemelere uygun şekilde sorumlu bir şekilde atın.
- Bu cihaz yalnızca iç mekanda kullanıma yöneliktir.
Ürün Bittiview
The SOMFY Situo RTS Pure is a sleek, handheld radio transmitter designed for intuitive control of your Somfy RTS products.
Bu görüntü ön tarafı gösteriyor view of the SOMFY Situo RTS Pure radio wall transmitter. It is a white, rectangular device with three gray circular buttons arranged vertically in the center: an 'up' arrow, a 'my' button, and a 'down' arrow. Below the buttons, there is a small black indicator light. The Somfy logo is subtly embossed at the bottom.
Temel Bileşenler:
- Yukarı Düğmesi (^): Moves the connected drive upwards (e.g., opens blinds).
- My Button (my): Stops the drive or recalls a pre-programmed favorite position.
- Aşağı Düğmesi (v): Moves the connected drive downwards (e.g., closes blinds).
- Gösterge Işığı: Provides visual feedback on commands and battery status.
- Programming Button (rear): Used for pairing the transmitter with Somfy RTS drives.
Kurmak
1. Pil Kurulumu
- Gently slide open the battery compartment cover on the back of the transmitter.
- Insert the supplied battery (type CR2430) ensuring correct polarity (+/-).
- Pil bölmesi kapağını sıkıca kapatın.
2. Pairing with a Somfy RTS Drive
To control a Somfy RTS drive, the transmitter must first be paired. This process typically involves using an existing paired transmitter or the drive's programming button.
- Using an existing transmitter: Take an already programmed RTS transmitter that controls the desired drive. Press and hold its programming button (usually on the back) until the drive moves briefly.
- Immediately after the drive moves, take your new Situo RTS Pure transmitter. Press and hold its programming button (located on the back, often recessed) until the drive moves briefly again. This confirms successful pairing.
- Without an existing transmitter: Refer to the specific instructions for your Somfy RTS drive to put it into programming mode. Once the drive is in programming mode, press the programming button on your Situo RTS Pure transmitter until the drive moves briefly.
Note: If you are pairing with multiple drives, repeat the process for each drive or group of drives.
Kullanım Talimatları
Temel Kontrol:
- To move the drive up (e.g., open blinds), press the ^ düğme.
- To move the drive aşağı (e.g., close blinds), press the v düğme.
- İle durmak the drive at any point, press the my düğme.
Setting a Favorite Position ('my' position):
- Move the drive to your desired favorite position using the ^ or v düğmeler.
- Once at the desired position, press and hold the my button until the drive moves briefly. This saves the position.
Recalling a Favorite Position:
- From any position, a short press of the my button will move the drive to its pre-programmed favorite position.
Bakım
Pil Değişimi:
When the indicator light on the transmitter no longer illuminates or the range decreases significantly, it is time to replace the battery.
- Slide open the battery compartment cover on the back of the transmitter.
- Eski CR2430 pili çıkarın.
- Insert a new CR2430 battery, observing the correct polarity (+/-).
- Pil bölmesinin kapağını kapatın.
Note: Dispose of old batteries according to local environmental regulations.
Temizlik:
Clean the transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Verici yanıt vermiyor. | Pil bitmiş. | Pili değiştirin. |
| Azaltılmış çalışma aralığı. | Low battery or radio interference. | Replace battery. Check for sources of interference (e.g., large metal objects, other radio devices). |
| Drive does not respond after pairing. | Pairing unsuccessful or drive is not powered. | Repeat the pairing process. Ensure the drive has power. |
Özellikler
- Modeli: Situo RTS Pure
- Üretici Model Numarası: 322147
- Marka: Somfy
- Radyo frekansı: 433.42 MHz
- Rolling Code System: Evet
- Menzil: Approximately 20 meters (indoors, depending on environment)
- Pil Tipi: CR2430 (dahil)
- Boyutlar: 1 x 1 x 1 cm (approximate, as per product data); 60 grams
- Kullanım Amacı: Kapalı
Garanti ve Destek
For warranty information and technical support, please refer to the official Somfy website or contact your local Somfy dealer. Keep your proof of purchase for warranty claims.
Çevrimiçi Kaynaklar: www.somfy.com
