Mitel 80C00005AAA-A

Aastra 6863i IP Phone

Kullanıcı Kılavuzu

Model: 80C00005AAA-A

1. Giriş

Thank you for choosing the Aastra 6863i IP Phone. This manual provides essential information for setting up, operating, and maintaining your new phone. The 6863i is designed for clear communication with its true HD handset and speakerphone, offering remarkable wideband audio quality. It features dual 100 BaseT Ethernet ports, advanced XML capabilities, and a PoE Class 1 rating, making it an efficient and environmentally conscious choice for your communication needs.

Please read this manual thoroughly before using the phone to ensure proper operation and to take full advantage özelliklerinden.

2. Paket İçeriği

Paketinizde tüm ürünlerin mevcut olduğundan emin olun. Eksik veya hasarlı bir ürün varsa, lütfen satıcınızla iletişime geçin.

3. Kurulum

Follow these steps to set up your Aastra 6863i IP Phone:

  1. Masa standını takın: Align the tabs on the desk stand with the slots on the back of the phone unit and snap it into place. This allows the phone to sit at an optimal viewaçı.

  2. Telefonu bağlayın: Sarmal ahize kablosunun bir ucunu ahizeye, diğer ucunu ise telefon ünitesindeki ahize girişine (genellikle ahize simgesiyle işaretlenmiştir) takın.

  3. Şebekeye ve Güce Bağlanın:

    • Ethernet Üzerinden Güç (PoE) Kullanımı: Connect one end of the Ethernet cable to the LAN port on the phone (often labeled with a network icon) and the other end to a PoE-enabled network switch or router. The phone will power on automatically.
    • Using an Optional AC Adapter: If PoE is not available, connect an optional Efficiency Level "V" compliant AC power adapter (not included) to the power port on the phone and then to a power outlet. Then, connect the Ethernet cable from your network to the LAN port on the phone.
  4. İlk Başlatma: The phone will begin its boot-up sequence. The display will show various messages as it connects to the network and registers with your IP PBX system. This process may take a few moments.

  5. Yapılandırma: The phone supports Manual or Dynamic Host Configuration Protocol (DHCP) IP address setup. Your network administrator will typically configure the phone's network settings and line registrations automatically. If manual configuration is required, refer to your system administrator's instructions.

Aastra 6863i IP Phone, showing the handset, display, and keypad.

Figure 3.1: The Aastra 6863i IP Phone. This image displays the Aastra 6863i IP Phone from a front-right angle, highlighting its black finish, the monochrome LCD screen showing a sample call, the numeric keypad, and dedicated function buttons.

4. Kullanım Talimatları

This section covers the basic operation of your Aastra 6863i IP Phone.

4.1 Arama Yapma ve Alma

4.2 Dedicated Keys

Anahtarİşlev
AktarımTransfers an active call to another number.
Arayanlar ListesiAccesses a list of recent incoming calls.
TutmakDevam eden aramayı beklemeye alır.
YenidenEn son aranan numarayı arar.
Güle güleEnds an active call or exits a menu.
SeçeneklerAccesses phone settings and options.
Ses TuşlarıAdjusts handset, headset, or speaker volume during a call, or ringer volume when idle.
Sesini kapatmak (with LED)Mutes the microphone during a call. The LED indicates mute status.
Konuşmacı (with LED)Activates or deactivates the speakerphone. The LED indicates speakerphone status.

4.3 Programlanabilir Tuş

The Aastra 6863i features 3 programmable keys (L1, L2, and one additional). These keys can be configured by your system administrator for various functions such as speed dials, line appearances, or feature access codes. Consult your system administrator for details on their specific functions.

4.4 Gezinme

Use the 4-way navigation cluster with the Seç / Tamam key in the center to navigate through menus and lists on the display. The Seçenekler key can also be used to access settings.

5. Özellikler Bittiview

6. Bakım

Proper care and maintenance will ensure the longevity of your Aastra 6863i IP Phone.

7. Sorun Giderme

If you encounter issues with your Aastra 6863i IP Phone, refer to the following common problems and solutions:

SorunOlası Neden / Çözüm
Telefon açılmıyor.
  • Ensure the Ethernet cable is securely connected to a PoE-enabled port.
  • If using an AC adapter, ensure it is properly connected to a working power outlet.
  • Verify the network switch/router is providing PoE power.
Çevir sesi yok.
  • Ağ kablosu bağlantısını kontrol edin.
  • Ensure the phone is registered with the IP PBX system (check display for registration status).
  • Contact your network administrator if the issue persists.
Ekran boş veya okunaksız.
  • Güç bağlantısını kontrol edin.
  • Adjust display contrast via phone settings (if available).
  • The phone's LCD does not have a backlight. Ensure adequate ambient lighting.
Arama yapılamaz veya alınamaz.
  • Ağ bağlantısını doğrulayın.
  • Confirm phone registration status on the display.
  • Ensure no network firewall or router issues are blocking VoIP traffic.
  • Contact your network administrator for assistance with SIP registration or network issues.

For more complex issues, please consult your network administrator or the Mitel support webalan.

8. Özellikler

ÖzellikDetay
MarkaMitel (Manufactured by Aastra)
Model Numarası80C00005AAA-A
Ürün Ağırlığı1.54 pound (0.7 Kilogram)
Ürün Boyutları17.72 x 17.72 x 17.72 inç
Güç KaynağıCorded Electric (PoE Class 1 or optional AC adapter)
Çevirici TürüTek Tuş Takımı
Çoklu Hat İşlemiMulti-Line Operation (Up to 2 lines)
Arayan KimliğiEvet
GörüntülemekMonochrome LCD 2.75" 128x48 pixel graphical display
Ethernet Bağlantı NoktalarıDual 10/100 Mbps

9. Güvenlik Bilgileri

Please read and follow these safety guidelines to prevent injury or damage to your phone:

10. Destek

For technical support, warranty information, or further assistance, please contact your product vendor or visit the Mitel support website. Please have your model number (80C00005AAA-A) and serial number ready when contacting support.

For general information about Mitel products, you can visit: www.mitel.com

İlgili Belgeler - 80C00005AAA-A

Önview Mitel 6907 IP Telefon Kurulum Kılavuzu
Bu belge, Mitel 6907 IP Telefonu için kurulum talimatları, ayar kılavuzu ve önemli güvenlik önlemlerini içermektedir. Ağ ve ahize bağlantıları, masa ve duvar montajı, ürün özellikleri ve mevzuat uyumluluğu bilgileri detaylı olarak açıklanmıştır.
Önview Mitel 6940w IP Telefon: Güvenlik, Yasal Düzenlemeler ve Özellikler
Mitel 6940w IP Telefonu (Model EHTPERS3) için kapsamlı güvenlik, düzenleyici ve bağlantı bilgileri. Bu belge, ürün özelliklerini, kurulum talimatlarını, ağ ve güç bağlantılarını ve FCC ve AB uyumluluğu dahil olmak üzere temel güvenlik önlemlerini ayrıntılı olarak açıklamaktadır.
Önview Mitel 6867i SIP Telefon Kullanım Kılavuzu: Özellikler, Çağrı Yönetimi ve Kurulum
Mitel 6867i SIP telefonunun özelliklerini, gelişmiş çağrı yönetimi prosedürlerini ve adım adım kurulum talimatlarını detaylandıran kapsamlı bir kılavuz. HD geniş bant ses, Gigabit Ethernet, programlanabilir tuşlar ve ileri düzey kullanıcılar için ağ bağlantısı hakkında bilgi edinin.
Önview Mitel MiVoice 6930 IP Telefon Kurulum Kılavuzu
Bu kapsamlı kurulum kılavuzu ile Mitel MiVoice 6930 IP Telefonunuzu nasıl kuracağınızı ve ayarlayacağınızı öğrenin. Özelliklerini, bağlantı seçeneklerini ve en iyi performansı sağlamak için alınması gereken güvenlik önlemlerini keşfedin.
Önview Mitel 6920 SIP Telefon Kullanım Kılavuzu: Özellikler, Kurulum ve Çalıştırma
Bu kapsamlı kullanım kılavuzu ile Mitel 6920 SIP IP Telefonu keşfedin. İşletmenizin verimli iletişimi için gelişmiş özelliklerini, kurulumunu, özelleştirme seçeneklerini, çağrı yönetimini ve sorun giderme yöntemlerini öğrenin.
Önview Mitel MiVoice Border Gateway Remote Phone Guide - Configuration and Troubleshooting
Official guide for Mitel MiVoice Border Gateway (MBG) covering remote IP phone setup, supported devices, configuration procedures, and troubleshooting tips for Release 11.5.