Avaya 6408D+ Definity PBX Phone User Manual

1. Giriş

This manual provides essential instructions for the setup, operation, and maintenance of your Avaya 6408D+ Definity PBX Phone. Please read this guide thoroughly to ensure proper use and to maximize the functionality of your device. This phone is designed for use with Avaya Definity and Avaya IP Office Phone Systems.

2. Ürün Bittiview

The Avaya 6408D+ is a digital PBX phone featuring a 2-line by 24-character display and eight programmable call appearance/feature buttons. It includes a two-way speakerphone for hands-free communication.

Figure 1: Avaya 6408D+ Definity PBX Phone

Temel Özellikler:

• Görüntülemek: 2-line, 24-character tilt LCD display for time, date, and call information.
• Düğmeler: Eight programmable call appearance/feature buttons.
• Hoparlör: Integrated two-way speakerphone.
• Uyumluluk: Designed for Avaya Definity and Avaya IP Office Phone Systems.
• Klavye: Programmable keypad for customized functions.

3. Kurulum

Follow these steps to set up your Avaya 6408D+ phone:

1. Paketi aç: Tüm bileşenleri dikkatlice ambalajından çıkarın.
2. Telefonu Bağlayın: Plug the coiled cord from the handset into the designated port on the side of the phone base.
3. Bağlantı Kablosu: Connect one end of the line cord to the port labeled 'LINE' or 'TELCO' on the back of the phone. Connect the other end to the wall jack provided by your PBX system.
4. Güç Bağlantısı: The phone typically draws power directly from the PBX system via the line cord. No separate power adapter is usually required.
5. Konumlandırma: Place the phone on a stable, flat surface. Adjust the display tilt for optimal viewing if applicable.

Not: For initial system configuration or advanced setup, consult your system administrator or the Avaya Definity/IP Office system documentation.

4. Kullanım Talimatları

4.1 Temel Çağrı Fonksiyonları

• Arama yapmak: Ahizeyi kaldırın veya Konuşmacı Düğmeye basın. Tuş takımını kullanarak istediğiniz numarayı çevirin.
• Bir Aramayı Cevaplama: When the phone rings, lift the handset or press the flashing call appearance button, or press the Konuşmacı düğme.
• Aramayı Bitirme: Telefonu yerine koyun veya basın. Konuşmacı button again if in speakerphone mode.

4.2 Using Feature Buttons

The eight buttons adjacent to the display are programmable feature buttons. Their functions are determined by your PBX system configuration. Common functions include:

• Call Appearance: Used to make or receive calls on a specific line.
• Tutmak: Devam eden aramayı beklemeye alır.
• transferi: Transfers an active call to another extension or external number.
• Konferans: Initiates a conference call (supports 2-way conferencing).
• Tekrar arama: En son aranan numarayı arar.
• Sesini kapatmak: Görüşme sırasında mikrofonunuzu sessize alır.

Consult your system administrator for a list of programmed features on your specific phone.

4.3 Speakerphone Operation

Hoparlörü kullanmak için, Konuşmacı button. The indicator light will illuminate. You can then speak and listen without lifting the handset. Press the Konuşmacı button again to end the call or switch to the handset by lifting it.

4.4 Ekran Bilgileri

The 2-line display shows various information, including:

• Geçerli saat ve tarih.
• Caller ID information (if available and configured by your PBX system).
• Call duration during an active call.
• Feature prompts and status messages.

5. Bakım

To ensure the longevity and proper functioning of your Avaya 6408D+ phone, follow these simple maintenance guidelines:

• Temizlik: Yumuşak, hafif sert bir bez kullanınamp cloth to clean the phone's exterior. Avoid abrasive cleaners, solvents, or excessive moisture. Do not spray cleaners directly onto the phone.
• Ekran Bakımı: Gently wipe the display with a soft, lint-free cloth. Avoid pressing hard on the display.
• Çevre: Keep the phone away from direct sunlight, excessive heat, humidity, and dust.
• Kordon yönetimi: Kabloların birbirine dolanmadığından veya sıkışmadığından emin olun, aksi takdirde hasara neden olabilir.

6. Sorun Giderme

If you encounter issues with your Avaya 6408D+ phone, try the following basic troubleshooting steps:

• Çevir Sesi Yok:
  • Check that the line cord is securely connected to both the phone and the wall jack.
  • Ensure the handset cord is properly connected.
  • If using a multi-line system, ensure the correct line appearance button is selected.
• Ekran Çalışmıyor:
  • Tüm bağlantıların güvenli olduğunu doğrulayın.
  • The display may require a slight tilt adjustment to be visible.
• No Sound from Speakerphone:
  • Sağlamak Konuşmacı düğmesi yanar.
  • Check the volume settings on the phone.
• Düğmeler Yanıt Vermiyor:
  • Disconnect the phone from the wall jack for a few seconds, then reconnect it. This can sometimes reset the device.

If these steps do not resolve the issue, please contact your system administrator or IT support for further assistance. Do not attempt to open or repair the phone yourself, as this may void any applicable warranty.

7. Özellikler

8. Garanti ve Destek

Warranty information for the Avaya 6408D+ Definity PBX Phone is typically provided at the point of purchase or through your telecommunications service provider/system administrator. Please refer to your purchase documentation for specific warranty terms and conditions.

For technical support, advanced configuration, or service inquiries, please contact your organization's IT department or the authorized Avaya service provider responsible for your PBX system. Avaya's official website may also provide general support resources and documentation.