1. Ürün Bittiview
The Metabo HWW 4000/25 G is a domestic water pump system designed for automatic water supply, garden irrigation, groundwater pumping, and the transfer, pumping, and circulation of clear water from pressure tanks. It features an energy-efficient and low-noise operation, equipped with a pressure switch on the boiler for automatic activation to meet higher water demands. The system includes a maintenance-free capacitor motor and overload protection to prevent overheating. A high-quality mechanical sealing system ensures a long service life. For user convenience, it has a separate water filling opening for easy pump startup and a tool-free water drain plug to protect against frost damage. This system is suitable for garden irrigation with 1 to 3 sprinklers and operates on single-phase power.
2. Güvenlik Talimatları
Bu ürünü çalıştırmadan önce tüm güvenlik uyarılarını ve talimatlarını mutlaka okuyun ve anlayın. Bu talimatlara uyulmaması elektrik çarpmasına, yangına ve/veya ciddi yaralanmalara neden olabilir.
- Güç kaynağının ses seviyesiyle eşleştiğinden emin oluntage specified on the pump's rating plate.
- Do not operate the pump with damaged cables or plugs.
- Protect the pump from frost. Drain water completely if storing in freezing temperatures.
- Do not pump flammable, explosive, or corrosive liquids.
- Çocukları ve yetkisiz kişileri çalışma alanından uzak tutun.
- Herhangi bir bakım veya temizlik işlemi yapmadan önce mutlaka elektrik bağlantısını kesin.
3. Kurulum
3.1 Paketin açılması
Tüm bileşenleri ambalajından dikkatlice çıkarın. Taşıma sırasında oluşabilecek herhangi bir hasar olup olmadığını kontrol edin. Ambalajı, ileride depolama veya nakliye için saklayın.
3.2 Yerleştirme
Place the pump on a firm, level surface in a dry, well-ventilated area, protected from direct sunlight and frost. Ensure sufficient space around the pump for ventilation and maintenance.
3.3 Elektrik Bağlantısı
Connect the pump to a properly grounded electrical outlet. Ensure the electrical circuit is protected by a residual current device (RCD) with a tripping current of no more than 30 mA.
3.4 Su Bağlantıları
Connect the suction line to the pump's inlet and the pressure line to the outlet. Use appropriate fittings and sealants to ensure watertight connections. For optimal performance, the suction line should be as short and straight as possible, and its diameter should not be smaller than the pump's inlet diameter. Install a non-return valve on the suction line to prevent water from flowing back.
3.5 Pompanın Hazırlanması
Before initial start-up, the pump must be completely filled with water through the separate water filling opening until no more air escapes. This ensures proper suction and prevents dry running. Close the filling opening securely after priming.
4. Kullanım Talimatları
4.1 İlk Çalıştırma
After priming the pump and ensuring all connections are secure, plug the pump into the electrical outlet. The pump will start automatically when water is drawn and the pressure in the system drops below the set activation pressure.
4.2 Otomatik Çalışma
The integrated pressure switch monitors the system pressure. When water is consumed (e.g., opening a tap), the pressure drops, and the pump automatically switches on. Once the water consumption stops and the system pressure reaches the maximum set value, the pump switches off. This automatic function ensures an efficient and convenient water supply.
4.3 Kapatma
To temporarily shut down the pump, simply close all water outlets. The pump will switch off automatically. For extended periods of non-use or maintenance, disconnect the pump from the power supply.
5. Bakım
5.1 Düzenli Kontroller
Periodically check all connections for leaks. Ensure the suction line is free from blockages and the non-return valve is functioning correctly. Inspect the power cable for any signs of damage.
5.2 Temizlik
Clean the exterior of the pump with a damp cloth. Do not use harsh detergents or solvents. Ensure the motor's cooling fins are free from dust and debris to prevent overheating.
5.3 Kış Muhafazası
If the pump is to be stored in an area where temperatures may drop below freezing, it is crucial to completely drain all water from the pump and connected lines. Use the tool-free water drain plug for this purpose. Store the pump in a dry, frost-free location.
6. Sorun Giderme
Müşteri desteğiyle iletişime geçmeden önce lütfen aşağıdaki sorun giderme kılavuzuna bakın:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Pompa çalışmıyor | No power supply; Overload protection activated; Motor fault | Check power connection and circuit breaker; Allow motor to cool down; Contact service technician |
| Pompa çalışıyor ama su gelmiyor. | Pump not primed; Suction line blocked or leaking; Water source empty | Prime the pump; Check suction line for leaks or blockages; Ensure water source has sufficient water |
| Düşük basınç veya akış hızı | Partial blockage in suction/pressure line; Air in the system; Worn pump components | Check lines for blockages; Re-prime the pump; Contact service technician for inspection |
| Pump switches on and off frequently | Leak in the system; Pressure tank pre-charge pressure incorrect; Non-return valve faulty | Check entire system for leaks; Adjust pressure tank pre-charge; Inspect/replace non-return valve |
7. Teknik Özellikler
| Şartname | Değer |
|---|---|
| Üretici | Metabo |
| Referans Numarası | 600971000 |
| Renk | Yeşil |
| Stil | Yerel |
| Malzeme | Metal |
| Güç Kaynağı | Elektrik kablosu |
| Cilttage | 240 Volt |
| Nominal Giriş Gücü | 1100 Vat |
| Ürün Miktarı | 1 |
| Parça Sayısı | 1 |
| Maksimum Akış Hızı | Saatte 4000 Litre |
| Maximum Delivery Head | 46 Metre |
| Dahil Bileşenler | METABO 600971000 - Domestic Water Pump HWW 4000/25 G 1100W max. pumping height 46 m |
| Piller Dahil | HAYIR |
| Piller Gerekli | HAYIR |
| Ağırlık | 17.2 Kilogram |
| Çap | 1 Pikometre |
| Yedek Parça Bulunabilirliği | 1 Yıl |
| Ürün Boyutları (U x G x Y) | 62.6x52x28.78 cm |
| Ürün Model Numarası | 600971000 |
| Menşei ülke | Çin |
8. Garanti ve Destek
Metabo products are manufactured to high-quality standards and undergo strict quality control. This product comes with a standard manufacturer's warranty, typically covering defects in materials and workmanship for a period specified at the time of purchase. Please retain your proof of purchase for warranty claims.
For technical assistance, spare parts, or warranty service, please contact your authorized Metabo dealer or visit the official Metabo website for local service centers. When contacting support, please have your model number (HWW 4000/25 G) and serial number (if applicable) ready.
- Çevrimiçi destek: Ziyaret etmek www.metabo.com
- Müşteri Hizmetleri: Refer to your product packaging or the Metabo webBölgesel iletişim bilgileri için siteyi ziyaret edin.
