HP Compaq 513426-001 Anakart Kullanım Kılavuzu

1. Giriş

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the HP Compaq 513426-001 Motherboard. This motherboard, also known as the Pegatron M2N68-LA Narra5-GL6 Rev:5.0, is designed for use in HP Pavilion P6000 series desktop computers. Please read this manual thoroughly before proceeding with any installation or configuration to ensure proper functionality and system stability.

2. Ürün Bittiview

The HP Compaq 513426-001 Motherboard is a core component for your desktop system, supporting AMD processors with AM2+ and AM2 sockets. It features multiple expansion slots, memory slots, and connectivity options to build or upgrade a personal computer.

Şekil 2.1: Açısal view of the HP Compaq 513426-001 Motherboard, showing various components including the CPU socket, RAM slots, and I/O ports.

Temel özellikler şunlardır:

• CPU Socket: AM2+/AM2 for compatible AMD processors.
• Memory Slots: 5 slots supporting up to 32 GB of RAM.
• Storage Connectivity: 6 SATA ports for hard drives and solid-state drives.
• Integrated Graphics: Onboard video output ports.

Şekil 2.2: Yan view of the motherboard, illustrating the CPU heatsink and fan assembly, along with the rear I/O panel.

Şekil 2.3: Genel giderler view of the motherboard, clearly showing the layout of components, expansion slots, and the included I/O shield.

Figure 2.4: Another angled perspective of the motherboard, highlighting the CPU cooler installation area and the various ports on the I/O panel.

3. Kurulum ve Kurulum

Before beginning installation, ensure your computer is powered off and unplugged from the wall outlet. Wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

3.1. CPU Kurulumu

1. Locate the AM2+/AM2 CPU socket on the motherboard.
2. Gently lift the retention lever on the side of the CPU socket.
3. Align the CPU with the socket, ensuring the gold triangle on the CPU matches the triangle on the socket. Do not force the CPU into place.
4. Once seated, lower the retention lever to secure the CPU.
5. Apply a thin, even layer of thermal paste to the top of the CPU (if not pre-applied to the cooler).
6. İşlemci soğutucusunu, üreticinin talimatlarına uygun olarak takın ve işlemciyle sıkı temas sağladığından emin olun.

3.2. Bellek (RAM) Kurulumu

1. Locate the 5 memory slots on the motherboard.
2. Bellek yuvasının her iki ucundaki klipsleri açın.
3. Bellek modülünü yuvayla hizalayın ve modüldeki çentiğin yuvadaki anahtarla eşleştiğinden emin olun.
4. Klipsler yerine oturana kadar bellek modülünün her iki ucuna sıkıca bastırın.

3.3. Depolama Aygıtı Bağlantısı

1. Connect SATA data cables from your hard drives or SSDs to the 6 SATA ports on the motherboard.
2. Ensure power cables from the power supply are connected to your storage devices.

3.4. Genişletme Kartı Kurulumu

1. Identify the appropriate PCI Express (PCIe) or PCI slot for your expansion card (e.g., graphics card, network card).
2. Remove the corresponding metal bracket from your computer case.
3. Kartı yuvaya hizalayın ve tamamen oturana kadar sıkıca bastırın.
4. Kartı bilgisayar kasanızdaki bir vida veya sabitleme klipsi kullanarak sabitleyin.

3.5. Power Supply and Front Panel Connections

1. Connect the main 24-pin ATX power connector from your power supply to the motherboard.
2. 4 veya 8 pinli CPU güç konektörünü anakarta bağlayın.
3. Connect the front panel headers (power button, reset button, HDD LED, power LED, front USB, front audio) to their respective pins on the motherboard. Refer to your computer case manual for specific pin assignments.

3.6. Anakartın Montajı

1. Install standoffs in your computer case that align with the screw holes on the motherboard.
2. Carefully place the motherboard onto the standoffs, ensuring the rear I/O ports align with the I/O shield in the case.
3. Anakartı vidalarla sabitleyin. Çok fazla sıkmayın.

4. Operating System and BIOS Configuration

4.1. İlk Başlatma

After all components are installed and connected, plug in your computer and power it on. The system should perform a Power-On Self-Test (POST). If successful, you will see a display on your monitor.

4.2. BIOS/UEFI Access and Configuration

To access the BIOS (Basic Input/Output System) setup utility, press the designated key (commonly SİL, F2, F10, veya F12) repeatedly during the initial boot sequence. Within the BIOS, you can configure settings such as:

• Boot order (to install an operating system from a USB drive or DVD).
• Sistem tarihi ve saati.
• İşlemci ve bellek ayarları.
• Integrated peripheral settings.

4.3. İşletim Sistemi Kurulumu

Once the BIOS is configured, you can proceed with installing your preferred operating system. The motherboard is compatible with various operating systems, including Linux, as indicated in its specifications. Follow the installation instructions provided with your operating system.

5. Bakım

Düzenli bakım, anakartınızın ve sisteminizin uzun ömürlü ve istikrarlı çalışmasını sağlamaya yardımcı olur.

5.1. Dust Removal

Dust accumulation can lead to overheating and component failure. Periodically (e.g., every 6-12 months), open your computer case and use compressed air to gently remove dust from the motherboard, CPU cooler, and other components. Ensure the system is powered off and unplugged before cleaning.

5.2. Kablo Yönetimi

Ensure internal cables are neatly routed and do not obstruct airflow. Proper cable management improves cooling efficiency and makes future maintenance easier.

5.3. BIOS Güncellemeleri

Occasionally, the manufacturer may release BIOS updates to improve compatibility, stability, or add new features. Check the official HP support website for your specific system model (HP Pavilion P6000 series) for available BIOS updates and follow their instructions carefully. Incorrect BIOS updates can render your motherboard inoperable.

6. Sorun Giderme

Sorunlarla karşılaşırsanız aşağıdaki genel sorun giderme adımlarına bakın:

6.1. Güç Yok / Sistem Açılmıyor

• Verify that the power supply is connected to the wall outlet and switched on.
• Check all power connections to the motherboard (24-pin ATX and CPU power).
• Ön panel güç düğmesi kablosunun anakart başlığına doğru şekilde bağlı olduğundan emin olun.
• Güç kaynağını başka bir sistemle veya varsa bir güç kaynağı test cihazıyla test edin.

6.2. No Display / Blank Screen

• Ensure the monitor is powered on and connected to the correct video output port on the motherboard or graphics card.
• (Varsa) ekran kartını ve bellek modüllerini yeniden takın.
• Yalnızca bir bellek modülü takılıyken önyükleme yapmayı deneyin.
• If using a dedicated graphics card, try connecting the monitor to the integrated graphics port (if available) to rule out the card as the issue.

6.3. Sistem Kararsızlığı / Çökmeler

• Check CPU and system temperatures using monitoring software. Overheating can cause instability.
• Run memory diagnostic tools to check for faulty RAM modules.
• Ensure all drivers for your operating system are up to date.
• Check for loose connections for power or data cables.

6.4. Beep Codes

If your system emits a series of beeps during startup, these are diagnostic codes indicating a specific hardware issue. Refer to the HP or Pegatron documentation for a list of beep codes specific to the Narra5-GL6 motherboard to diagnose the problem.

7. Özellikler

8. Garanti ve Destek

For warranty information and technical support, please refer to the documentation provided with your original HP Pavilion P6000 series desktop computer or contact HP customer support directly. Keep your proof of purchase for warranty claims. Specific warranty terms may vary by region and purchase date.