giriiş
The QualGear QG-TM-001 is an ultra-low profile, picture-hanging style TV wall mount designed for most 37 to 70-inch TVs and monitors, supporting up to 110 lbs. This mount allows your TV to sit less than 0.6 inches from the wall, providing a sleek and minimalist appearance. Constructed with durable stainless steel, it offers a secure and stable mounting solution. Please note: This mount is not compatible for wood stud installations for TVs with VESA (mounting hole patterns) less than 400x400mm.
Image: A television mounted on the QualGear QG-TM-001 wall mount, appearing flush with the wall.
Kutuda Neler Var?
- Duvara Monte Bileşenler
- Montaj Donanımı Takımı
Image: Various screws, washers, spacers, and wall mount components from the QualGear QG-TM-001 hardware kit.
Gerekli Araçlar
Kurulum için aşağıdaki araçlar önerilir:
- Elektrikli Matkap
- Lokma anahtar
- İşaretleme kalemi
- Çekiç
Kurulum Kılavuzu
Follow these steps to properly install your QualGear QG-TM-001 TV wall mount:
Video: Official QualGear QG-TM-001 installation guide. This video demonstrates the step-by-step process of mounting the TV to the wall.
- Adım 1: Duvarı Hazırlayın
For most installations, locate the wall studs and mark the pilot holes centered on the stud. If not installing on a wood panel, ensure proper stud location. Drill the pilot holes and then screw the wall mount plates onto the wall securely. - Step 2: Install Adapter Brackets on TV
Attach the adapter brackets to the back of your TV. This mount supports a wide range of VESA mounting hole patterns. Select the appropriate screws, washers, and spacers from the provided hardware kit that match your TV's specifications. Securely fasten the brackets. - Step 3: Hang the TV on the Wall Plate(s)
Carefully lift the TV and hook the wire rope from the TV-mounted brackets over the wall plate rail. Ensure the TV is securely seated and correctly attached to the wall mount. This step may require assistance. - Step 4: Manage Cables
To manage cables, gently fold out the tilt support mechanism on the mount. Connect all necessary cables to your TV. Once cables are connected and organized, fold the tilt support back into its original position.
İşletim
The QualGear QG-TM-001 is a fixed wall mount, meaning it does not offer tilt, swivel, or rotation adjustments once installed. Its primary function is to hold the TV securely and flush against the wall. The tilt support feature can be temporarily engaged to provide space for cable access and management behind the TV.
Bakım
To ensure the longevity and safety of your TV mount:
- Tüm vidaların ve bağlantıların sıkı ve güvenli olduğundan emin olmak için düzenli olarak kontrol edin.
- Montaj parçasını yumuşak, kuru bir bezle temizleyin. Aşındırıcı temizleyicilerden veya çözücülerden kaçının.
- 110 lbs'lik maksimum ağırlık kapasitesini aşmayın.
Sorun giderme
Kurulum sırasında veya sonrasında herhangi bir sorunla karşılaşırsanız:
- Televizyon Düz Değil: Recheck the wall mount installation to ensure the wall plates are perfectly level before hanging the TV.
- TV Feels Unstable: Verify that all screws are tightened correctly and that the wall studs were properly located and utilized for mounting. Ensure the wire rope is securely hooked over the wall plate rail.
- Difficulty with Cable Access: Utilize the tilt support feature by folding it out to create temporary space for easier cable connection and management.
Özellikler
- Model Numarası: QG-TM-001
- Uyumlu TV Boyutları: Most 37 to 70-inch TVs
- Ağırlık Kapasitesi: 110 lbs'ye kadar
- Profesyonel Montajfile: Less than 0.6 inches from the wall
- Malzeme: Paslanmaz çelik
- Montaj Tipi: Sabit Duvar Montajı
- Ürün Ölçüleri: 9.5 x 6.5 x 2 inç
- Ürün Ağırlığı: 1.32 pound
- VESA Uyumluluğu: 100x100mm ila 800x800mm
Garanti ve Destek
For warranty information or technical support, please refer to the official QualGear webSite üzerinden satın alabilir veya müşteri hizmetleriyle iletişime geçebilirsiniz. Garanti talepleriniz için satın alma fişinizi saklayın.
