Einhell GC-DP 1340 G Kirli Su Pompası Kullanım Kılavuzu

1. Giriş

The Einhell GC-DP 1340 G dirty water pump is a powerful and robust tool designed for demanding drainage tasks. It is ideal for pumping heavily contaminated water from various sources such as ponds, wells, construction sites, and flooded basements. With a high flow rate and durable construction, this pump ensures efficient and reliable performance.

Figure 1: Einhell GC-DP 1340 G Dirty Water Pump and included rope.

2. Güvenlik Talimatları

Yaralanmaları ve ekipman hasarını önlemek için her zaman aşağıdaki güvenlik talimatlarına uyun:

• Read the entire manual before operating the pump.
• Ensure the power supply matches the pump's specifications (230 Volts).
• Hasarlı bir elektrik kablosu veya fişi ile pompayı çalıştırmayın.
• Never lift or carry the pump by its power cord. Use the transport handle or the provided rope.
• Çocukları ve yetkisiz kişileri çalışma alanından uzak tutun.
• Do not pump flammable, explosive, or corrosive liquids.
• Ensure adequate ventilation when operating in enclosed spaces.
• Disconnect the pump from the power supply before any maintenance or cleaning.

3. Ürün Bileşenleri

Familiarize yourself with the main components of your Einhell dirty water pump:

• 

  3.1. Pump Body and Float Switch

  The main body houses the motor and impeller. The red float switch automatically controls the pump's operation based on water level, allowing for continuous or automatic mode.

• 

  3.2. Hortum Bağlantısı

  The G2 hose connection is designed for 2-inch (approximately 50.8mm) hoses, ensuring efficient water discharge.

• 

  3.3. Taşıma Kolu

  A sturdy handle is integrated at the top of the pump for easy and secure transportation.
• 

  3.4. 6-meter Rope

  A 6-meter rope is included to facilitate lowering the pump into deep areas like wells or ponds.

4. Kurulum

Follow these steps for proper setup of your dirty water pump:

1. Hortumu takın: Securely connect a 2-inch (50.8mm) discharge hose to the pump's G2 connection. Ensure the connection is tight to prevent leaks.
2. Konumlandırma: Place the pump on a stable, level surface in the area to be drained. Ensure the pump is fully submerged in the water for optimal operation.
3. Çalışma Alanı: Allow for sufficient operating space around the pump, with a minimum of 50 x 50 cm, and a diameter of 27 cm for the pump itself.


Şekil 2: Pompa için önerilen minimum çalışma alanı.

4. Şamandıra Anahtarı Ayarı: Adjust the float switch cable length to control the desired ON/OFF water levels. A shorter cable means the pump will switch on and off within a smaller water level range.
5. Güç Bağlantısı: Plug the pump into a grounded electrical outlet that matches the pump's voltage gereksinimleri.

5. Kullanım Talimatları

The Einhell GC-DP 1340 G pump can operate in continuous or automatic mode:

5.1. Automatic Operation (Float Switch Controlled)

In automatic mode, the pump starts and stops based on the water level, controlled by the float switch. When the water level rises and lifts the float switch, the pump will activate. When the water level drops and the float switch lowers, the pump will deactivate.

Figure 3: Adjustable float switch for automatic operation.

5.2. Sürekli Çalışma

For continuous operation, secure the float switch in an upright position (e.g., by attaching it to the pump handle) so that it remains in the "ON" position regardless of the water level. This will keep the pump running continuously until manually unplugged or the water source is depleted.

The pump is designed to handle dirty water with particles up to 40 mm in size.

Figure 4: Maximum particle size handled by the pump.

6. Bakım

Düzenli bakım pompanızın uzun ömürlü olmasını ve optimum performans göstermesini sağlar:

• Temizlik: After each use, especially when pumping heavily contaminated water, rinse the pump thoroughly with clean water to remove debris and prevent clogging.
• Pervane Muayenesi: Periodically check the impeller for any blockages or damage. Clear any debris carefully.


Şekil 5: Dahili view of the pump's impeller.

• Double Mechanical Seal: The high-quality double mechanical seal is designed for excellent durability and requires no maintenance.


Figure 6: Illustration of the double mechanical seal for extended lifespan.

• Depolamak: Store the pump in a dry, frost-free location when not in use for extended periods.

7. Sorun Giderme

8. Özellikler

9. Garanti ve Destek

Einhell products are manufactured with high-quality materials and undergo strict quality controls. While specific warranty details may vary by region and retailer, a standard return policy of 30 days is typically offered for new products.

For technical support, spare parts, or warranty claims, please contact your authorized Einhell dealer or visit the official Einhell website for customer service information. Please have your model number (GC-DP 1340 G) and purchase details ready when contacting support.

Daha fazla bilgi için şu adresi ziyaret edin: Einhell Marka Mağazası.