Versa G088-Black

Versa Quad Saat Sarma Makinesi Kullanım Kılavuzu

Model: G088-Black

giriiş

This manual provides comprehensive instructions for the Versa Quad Watch Winder, model G088-Black. Designed to keep your automatic timepieces accurately wound and ready for wear, this winder features advanced settings for optimal watch care. It is suitable for all kinds of automatic watches, ensuring they remain wound and precise.

Versa Quad Watch Winder in black, front view

Resim: Ön view of the Versa Quad Watch Winder, showcasing its sleek black design and four individual winding modules.

Temel Özellikler

  • Longer lasting direct-drive motor specifically designed for watch winders. Watch winder motor has 3 settings for clockwise, counter clockwise, and bi-directional. 4 settings for Turns Per Day (650-850-1050-1250). The watch winder will turn for approximately 5 minutes, then rests varies depending on setting. This cycle will repeat while the watch winder is on. The watch winder is programmed not to turn continuously which will overwind your watch.
  • Independently control the settings for each winder. One watch per winder compared to other watch winders that hold two watches per winder which can risk damage to the watches when turning.
  • Spring action pillow to support various watch sizes with additional adapter to fit larger size watches.
  • Plenty of interior space for large and oversize watches.
  • Power adapter included (110-240V). 1 yr warranty. Please contact us if you need assistance with your watch winder.
Close-up of Versa Quad Watch Winder showing control panel, adjustable pillow, and spacious compartments

Resim: Ayrıntılı view highlighting the multiple settings on the control panel, the adjustable spring-action watch pillow, and the ample space within each winding compartment.

Kurulum Kılavuzu

1. Güç Bağlantısı

Connect the provided power adapter (110-240V) to the DC input port on the back of the winder and then plug it into a suitable electrical outlet. Ensure the connection is secure.

2. Placing Your Watch

Gently place your automatic watch onto the adjustable watch pillow. Ensure the watch is securely fitted around the pillow. The spring-action pillow accommodates various watch sizes, with an additional adapter provided to fit larger watches comfortably.

Versa Quad Watch Winder with four watches placed inside

Image: The watch winder with four automatic watches securely placed in their individual winding modules, ready for operation.

Diagram showing adjustable watch pillow with and without adapter

Image: A diagram illustrating how the adjustable watch pillow can be used with or without an additional adapter to fit different wristband sizes, from 6 to 8 inches.

Kullanım Talimatları

Turns Per Day (TPD) Settings

The Versa Quad Watch Winder offers four Turns Per Day (TPD) settings to accommodate various automatic watch movements. Select the appropriate TPD for your watch's specific requirements. The winder operates in cycles, turning for approximately 5 minutes and then resting, to prevent overwinding and ensure optimal winding efficiency.

TPD SettingTanım
650Minimum recommended turns for watches requiring less winding.
850Standard turns for many common automatic movements.
1050Higher turns for watches with more complex movements or lower power reserves.
1250Maximum turns for watches with high winding demands.

Yön Ayarları

Choose from three directional settings based on your watch's winding requirements. Consult your watch manufacturer's specifications for the recommended winding direction.

YönTanım
Saat yönünde (CW)Winds the watch in a clockwise rotation.
Saat yönünün tersine (CCW)Winds the watch in a counter-clockwise rotation.
Çift yönlüWinds the watch in both clockwise and counter-clockwise rotations.

Bağımsız Kontrol

Each of the four winder modules can be controlled independently. This allows you to customize the TPD and directional settings for different watches simultaneously, ensuring each timepiece receives its optimal winding.

Bakım

To maintain your Versa Quad Watch Winder, regularly wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish. Ensure the winder is unplugged before cleaning. Keep the winder in a clean, dust-free environment to prevent debris from affecting its operation.

Sorun giderme

Watch Not Winding

If a watch is not winding, verify the power connection and ensure the winder is turned on. Check that the watch is securely seated on the pillow and that the correct TPD and directional settings are selected for your watch model. Some watches may require specific TPD or directional settings; consult your watch's manual.

Alışılmadık Gürültü

A slight hum from the motor is normal during operation. If unusual or excessive noise occurs, ensure the winder is on a stable, flat surface and that no objects are obstructing the rotating mechanism. If the issue persists, contact customer support.

Watch Damage Prevention

This winder is designed with individual modules to prevent watches from hitting each other during operation. To avoid potential damage, always place only one watch per winder module.

Warning image showing two watches on a single winder, indicating potential damage

Image: A visual warning demonstrating the risk of damage when two watches are placed on a single winding motor, emphasizing the importance of using one watch per module.

Ürün Özellikleri

ÖzellikDetay
Ürün Boyutları7 x 9.5 x 10 inç
Ürün Ağırlığı6.24 Pound
Ürün Model NumarasıG088-Black
ÜreticiKarşılıklı
Güç Girişi110-240V (Power adapter included)
Winding Capacity4 automatic watches (independent control)
TPD Ayarları650, 850, 1050, 1250
Yön AyarlarıClockwise, Counter-Clockwise, Bi-directional

Garanti ve Destek

The Versa Quad Watch Winder comes with a 1 yıllık garanti from the date of purchase. This warranty covers manufacturing defects and ensures proper functioning under normal use. Please retain your proof of purchase for warranty claims.

For assistance, technical support, or warranty inquiries, please contact Versa customer support through the retailer where the product was purchased or visit the official Versa webiletişim bilgileri için site.

Genişletilmiş Koruma Planları

Extended protection plans are available for purchase to provide additional coverage beyond the standard manufacturer's warranty. These plans offer peace of mind and can cover repairs or replacements for a longer duration.

  • 2 Yıllık Koruma Planı: 18.99 dolara mevcuttur
  • 3 Yıllık Koruma Planı: 25.99 dolara mevcuttur
  • Tam Koruma: Monthly plan for $16.99, covering all eligible past and future purchases.

İlgili Belgeler - G088-Black

Önview Versa Saat Sarma Cihazı G016 Kullanım Kılavuzu
Versa G016 saat sarma makinesi için kullanım kılavuzu; teknik özellikler, fonksiyonlar, çalışma prensibi ve çeşitli saat markalarıyla en iyi kullanım için ipuçlarını detaylandırmaktadır.
Önview Versa G088 Saat Sarma Cihazı: Kullanım Kılavuzu ve Talimatları
Versa G088 saat kurma cihazı için kapsamlı kullanım kılavuzu; teknik özellikler, çalışma prensibi, özellikler ve en iyi saat kurma ipuçlarını içerir. Marka uyumluluk ayarlarını da kapsar.
Önview Versa G078 Saat Sarma Cihazı Kullanım Kılavuzu
Versa G078 saat sarma makinesi için kullanım kılavuzu; teknik özellikler, fonksiyonlar, çalışma şekli ve çeşitli saat markaları için TPD ayarı ve dönüş yönü belirleme ipuçlarını detaylandırmaktadır.
Önview Versa G084 Saat Sarma Cihazı Kullanım Kılavuzu
Versa G084 saat kurma cihazı için kapsamlı kullanım kılavuzu; otomatik saat kurma işleminin teknik özelliklerini, işlevlerini, çalışma prensibini ve sorun giderme ipuçlarını ayrıntılı olarak açıklamaktadır.
Önview Versa VW-DP Hareket Sensörü: Çalışma Prensibi, Kurulumu ve Teknik Özellikleri
Versa VW-DP Hareket Sensörü hakkında kapsamlı bir kılavuz; özellikleri, kurulum talimatları, işletim programlaması, yürüme testi prosedürleri ve teknik özellikleri içerir. Evcil hayvan bağışıklığı ve FCC uyumluluğu hakkında ayrıntılı bilgiler de yer almaktadır.
Önview Z-Wave Takılabilir Dimmer Priz Uyumluluk Beyanı
Bu belge, Versa Takılabilir Dimmer Priz için Z-Wave Protokolü Uygulama Uyumluluk Bildirimi'ni, ürün özelliklerini, teknik bilgileri ve desteklenen komut sınıflarını ayrıntılı olarak açıklamaktadır.